How to configure receiver communication channel in File to mail scenario?

Hi all,
I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is a mail server. should i create any third party business system for this one?
can anyone suggest me to define a receiver comm channel in a right manner?
helpful answers will be rewarded.

Hi,
Check these
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards
Seshagiri

Similar Messages

Communication Channel Error : File to IDOC scenario

Hi all,
I am getting the below error in my CC monitoring for the channel, previously its good. Now its not getting process due to this error.
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'DTL':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
Below are the Conversion Parameters:
DTL.fieldNames : REC_CD,SYS_SOURCE_CD,ACC_DT,JE_NO,JE_SRL_NO,BUS_UNIT_CD,GEO,DEPT_ID,OPER_UNIT,PJT_ID,WRK_REQST_NO,OPEN_ITEM,PROCESS_CD,NATURAL_ACCT,FERC_ACCT,PRODUCT,AFFIL_BUS_UNIT_CD,RES_TYPE,REC_CATEGORY,DOLLAR_AMT_SIGN,DOLLAR_AMT,QTY_1,QTY,DESC,SECOND_DESC,BASE_CST_AMT_SIGN,BASE_CST_AMT,TRANS_DATE,EXH_NO,PO_NO,VENDOR_NO_7,STRS_REF_NO,STK_NO,STRM_NO,INV_TYPE,INV_NO,CUST_CD,PLAT_JE_REF_NO,VCH_NO,VCH_LINE_ITEM,AP_REF_NO,PO_LINE_NO,BILL_CTL_RPT_NO,VEH_NO,PAYT_RECVR_CODE,GLEX_SEQ_NO,PAYMT_TYPE_CODE,CHECK_NO,FILLER
fixedLength: 1,3,10,4,5,5,2,10,8,15,15,15,4,10,6,6,5,5,5,1,19,1,15,30,30,1,18,10,10,10,10,5,6,3,8,6,8,13,8,4,1,4,17,10,1,4,1,18,13
keyFieldValue: D
Please help me in this..
Regards,
Srikanth.

>
srikanth vadlamani wrote:
> Hi experts,
> Communication Channel itself shows this error, still I did not placed the file in the FTP to process.
> The error is not from RWB/MONI, it is from Communication channel monitoring, there I can see the red flag. If I am can process the file then its ok I can check with the data or my business people, but channel itself shows this error, need to fix, tomorrow they might place the file, it should process.Pls. help me how can I resolve this issue.
>
> regards,
> Sri..
In this case check SAP Note 830238.

RFC Look Up APIs for a IDOC Receiver Communication Channel

Hi,
Can we use RFC Look Up APIs in UDF for a IDOC Receiver Communication Channel. (File to IDOC Scenario). Requirement is to send a notificaiton when IDOC got posted with IDOC number.
Best Regards,
Madan Agrawal

As the name suggests, RFC lookup uses RFC receiver channel only. In mapping of your File to Idoc scenario, you may perform this lookup.
Requirement is to send a notificaiton when IDOC got posted with IDOC number.
Configure ALEAudit for this requirement. How were you planning to use RFC lookup for such a requirement?
Regards,
Prateek

Accessing Receiver Communication Channel Properties

I need to access the target directory information mentioned in the receiver communication channel of file adapter from within java mapping. The "Directory" parameter in the Dynamic configuration has the sender side directory information and i understand that this can be changed to any other directory which would be set as target directory for the receiver comm channel. However my requirement is to access the target directory maintained in the receiver communication channel from within the java mapping - would be great if someone could help.

Hi,
you can achieve that using [Integration Directory Programming Interface|http://help.sap.com/saphelp_nw04/helpdata/en/46/6dca42e5c269dfe10000000a11466f/frameset.htm]
Regards,
Udo

How To Configure XI Receiver Communication Channel ?

Hi Expert,
I have a Scenario wherein i have 2 XI systems & i need to pass the messages between these 2 XI / PI system using XI Adapter. Can any body tell me how to configure the XI Adapter Step by Step. Is it required to Create the SM59 RFC destination with type H. Pl. Explain me in detailed.
Regards
Umesh

Hi Umesh,
In creating XI receover communication channel, you have 2 options for Addressing Type:
1. URL Address - no need to create RFC destination. You just have to specify the XI receiver host name, HTTP port, path (/sap/xi/engine?type=receiver), Authentication data (logon details for SAP Client number of the PI system).
2. HTTP Destination - create RFC destination in SXMB_ADM and specify the RFC destination name in your receiver communication channel.
For SAP documentation, see this link: http://help.sap.com/saphelp_nwpi711/helpdata/en/e1/091640a991c742e10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Jenny

How can One sender communication channel pick two file from two location

Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter.

File Overwriting in File Receiver Communication Channel

Hi,
I have an IDoc to File scenario.
My file receiver communication channel has the following parameters :
- File name scheme = %timestamp%_AOBSD4RL.MES
(I'm using variable substition and the variable "timestamp" is initialized at mapping time with the current time in format yyyyMMddHHmmss).
- File Construction Mode = Create
- Option "Overwrite Existing File" not activated
When two inbound messages result in the same target file name, the second one overwrites the first one although the "Overwirte Existing File" setting is not active in the receiver channel. Is this a bug in XI ? (I'm on 7.00 SP11)
And is it possible to say to the receiver channel to process only 1 message per second so there will no more target file with same name ?
Thanks in advance,
Laurence

Hi Laurence,
There is no such facility with Receiver File Adapter to process single message in one step.
I want to suggest you a may possible way to overcome( it's just an idea), though I never worked with them I think it will work.
As you the file name is assigned to message with timestamp at receiver communication channel step you can schedule the outbound queue in such a way that it will transfer the message in delay.
Try to investigate further more, But i m not sure that Queue Scheduling is supported by SP11 or not.
Regards,
Shri
Reward point if it helps you

O/P file in receiver communication channel.

Consider a file to file scenario..
and in the receiver Communication Channel,We have to specify the name of the output file right.but i want my output in a different way.....
my output file names are different.....what shall io do now....
Any ideas...

Hi Reddy,
your requirement is not clear...
Try these
Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
Dynamic File Name Part 2
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
XI: The same filename from a sender to a receiver file adapter - SP14
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Sachin

How Do We Monitor HTTP Receiver Communication Channel

Hi Exports,
How do we monitor the HTTP Receiver communication channel. Could you please share your ideas.
I am able to send the message to http to third party system. i want to monitor all messages which it's goes to third party system. Same like if you go to component monitoring we have communication channel monitoring over there we can do monitoring by adapter but when we choose http communication channel there is 0 messages.
Please provide monitoring thing those messages which is goes to third party system.
Advance thanks
Regards
Ramidi S

There isnt any transaction to directly monitor the HTTP adapter. However u may do the following:
1. To test the HTTP adapter you can just test the adapter_plain service in TCODE SICF.
2. TCODE : SMICM and then Shift + F1 and you can see the status of the HTTP server
3. You can go to SM59 to see whether the HTTP connections between XI and R/3 are up and running
Regards,
Prateek

Possible to configure several communication channels for the same receiver?

Hi,
is it possible to configure several communication channels for one (the same) receiver?
The problem is as follows: I would like to switch between the RFC-channel and the XI-channel, if the RFC-Adapter doesn't work for some reason.
The situation: Our XI3.0 posts messages to several receivers and the switch should be done by changing one table entry which is selected and analysed in an ABAP-Proxy and which could enrich the XML-message. By now, the only chance I see is to change the respective entries in the Integration Directory for each receiver separately.
Thanks for your help, Peter.

Hi,
>>>>But to be honest: Is it elegant to double the receivers?
of course not:)
but this is the only way I believe
(cause you cannot assign conditions to receiver agreements)
you could also create two messages (practically two flows)
but would it be more elegant?
BTW
in my opinion you should try restarting RFC channel
and not create two - just in case...
if RFC doesn't always work why don't you use another one only?
this would just simplify your scenario (maintanance of just a number of communication channels and not 2 x number of communication channels)
Regards,
michal
Message was edited by: Michal Krawczyk

Dynamic user credentials for XI receiver communication channel

Hi Experts,
I am working on File(XML ) to ABAP proxy scenario. I want to know if I get the user-id and password information to login to R/3 system as part of the XML payload, can I use this information to connect to R/3 system in my XI Receiver communication channel?
Using a generic user credentials either in RFC destination or specifying it in communication channel configuration will not work. This is because the requirement is that the objects that will be created in inbound ABAP proxy (for ex Material Master) should be created with the user information that is coming from payload rather than a generic user.
Any pointers how to acheive this?
Thanks and regards,
Prasad
Edited by: Prasad MLN on Nov 16, 2009 4:00 PM

Hi,
You might want to learn more about Principal Propagation in sap XI:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID2039785750DB21057082877817322485End?blog=/pub/wlg/7068%3Fpage%3Dlast%26x-order%3Ddate
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/0f16bef65c7249e10000000a155369/content.htm
Regards,
Ravi Kanth Talagana

Error in Receiver Communication Channel in FCC

I have a simple scenario of Proxy to File. I have to just one field in complete row. So my structure is as below : MT_RecordIB -> Records. So my XSD looks like this :
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://XXXl.com/INF31018/SAPSerOrd_DaysIn" targetNamespace="http://hnwl.com/INF31018/SAPSerOrd_DaysIn">
   <xsd:element name="MT_RecordIB" type="DT_RecordIB" />
   <xsd:complexType name="DT_RecordIB">
      <xsd:sequence>
         <xsd:element name="Records" type="xsd:string" />
      </xsd:sequence>
   </xsd:complexType>
</xsd:schema>
I have used FCC and the parameters are :
Recordset Structure                                  Records
Records.fieldSeparator             'nl'
But I am getting following error in Receiver Communication Channel :
Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_RecordIB' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.21)
Thanks,
Pankaj Singh

Hey Pankaj,
Your content conversion parameter might be configured improperly.
Refer this blogs
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Refer the following threads for your problem
[ Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'|Unknown structure 'ns0:MT_dbglgtr_FileName' found in document']
Rgds
Ramesh

Need to use only one sender and receiver communication channel.

Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 --->                  E://dir1/File1
F://dir2/file2 ---->                 G://dir2/file2
H://dir3/file3----->                 I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit Ramesh

Hi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

Configuring a Communication Channel for an AE other than the default IS

Configuring a Communication Channel for an Adapter Engine other than the default engine.
See: help.sap.com for Communication Channel http://help.sap.com/saphelp_nw04/helpdata/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm
It states under 'Adapter Configuration', that you can specify the Adapter Engine you want to use in the Adapter Engine dropdown box.
I have activated the XI components on my ERP system using transaction SICF, but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
Maybe some background would be helpful: This is for a scenario that will send a file from an external system to one of the ERP systems in our landscape. BUT, the system admins have decided to revoke our FTP accounts (because they have their reasons), so I need to create a File Adapter that will drop the file on the file system of that ERP system, due to visibility I want to use the integrated Adapter Engine that comes with the ERP system, but need to know how/what I'm missing in setting up this scenario.

Hi Anesh,
>>>>but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
in order to use some other adapter engine you
have to install it first by dafault only one
(central) adapter engine is used and it is all
most clients need
if you'd like to use some other adapter engine
(decentralized for example) have a look at thid guide:
<b>Configuring a Local Adapter Engine to Work with a Central Instance</b>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

Recordset structure in receiver communication channel

Hi gurus!
I have a problem with my receiver communication channel it says "Unknown structure 'Headers' found in document', probably configuration error in file adapter (XML parser error)'"
It's for sure that the problem is in the configuration of the adapter.
My scenario is from iDoc to File and i need to write only one header and many Lines, i made the data type like:
Headers
---Header
Lines
---Line
And the problem is in the configurarion of the recordset structure and the lines below.
If you know another way better to make the data type to acommplish what i've to do, just tell me I just made it that way because i thought it could work.
If something is not clear just let me know, what i more need is the config. of the receiver adapter.
Thanx in advance.
Juan

Hi Juan
If i understand correctly .. you are doing FCC on your receiver communication channel...and the following is your Target Data type
Headers
---Header
Lines
---Line
and FCC parameters you created are as below
Recordset structure: Headers,Header,Lines,Line
Header.fieldSeparator \r\n
Header.endSeparator \r\n
Line.fieldSeparator \r\n
Line.endSeparator \r\n
If the above data is correct, then I would like you try out the FCC parameters in my previous post. Because in the FCC parameters, you used only substructures(Header and Line) and you did not mention the lists ( Headers and Lines). That's why i think it is errored out.
If my interpretation is wrong, please let me know where i went wrong, i will try to look at again.

How to configure receiver communication channel in File to mail scenario?

Similar Messages

Maybe you are looking for