How to configure reload interval on dashboard

Hi,
I am using dashboards to monitor status and availability.
The dashboard page is being refreshed every 5 min. Is there any way to change the refresh interval?
Furthermore after a period of time I get this message: "Auto reload is disabled. Please refresh the page to enable"
Is there any way to configure the dashboard so that it will never disable the auto reload feature?
Best Regards,

Hi,
Apparently there are 2 types of dashboard. One that you can launch from within a system and on that dashboard I can find the 'customize' link.
But the dashboard I am using is one that can be created from the 'Reports' tab. There is a 'Services Monitoring Dashboard' which I am using to display status and service level for a set of services. On that dashboard there is no 'customize' link in the top right corner. So how can I set the refresh/reload interval on that page?
After some time using that dashboard I also get this message: "Auto reload has been disabled". Then I can click the 'Refresh' button and the dashboard will continue to refresh for some time again. Can I configure the dashboard so that it will continue to refresh all day long?

Similar Messages

How to configure automatic reloading the class in jboss-3.2.1_tomcat-4.1.24

HI,
In tomcat, web context is specified in Server .xml file with

<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true" />.
this will deploy my examples webapplication in Tomcat server. And the property reloadable="ture" makes my life easiear. When even I change a .class, the class is automatically loaded in to memory with out restarting the server. Let me know the how to configure the same in Jboss-3.2.1_tomact-4.1.24 (auto-reload context) . Requesting for immediate solution

I am running into the same problem. The only solution I know is to touch the application.xml which will reload the .ear file, which is not efficient in my case.
Please let me also know if you have come across something else useful.
Thanks,
Mangal
[email protected]

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

How to configure Oracle SSO for OBIEE

Hi all
Can anyone help me saying how to configure Oracle Single Sign-on with OBIEE?
Basically I want to enable a common login for Dashboard and answers using SSO.
I am using OBIEE 10.1.3.4 on a Redhat Linux
thanks in advance

Hi...
See this, hope this what you want...??
If not .. ignore...
Thanks & Regards
Kishore Guggilla

How to configure link between 2921 and SM-D-ES3G-48-P EtherSwitch Service Module

hi,
I can't do that like the procedure given by Cisco.
http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1942894
Cisco Procedure :
interface gi10/0
ip address x.x.x.x x.x.x.x
service-module gigabitethernet 1/0 session
My result :
R2921-8CPITR-1(config)#int gi 1/1
R2921-8CPITR-1(config-if)#ip address 2.2.2.2 255.255.255.192
% IP addresses may not be configured on L2 links.
R2921-8CPITR-1(config-if)
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1.1 ?
% Unrecognized command
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1 ?
<cr>
R2921-8CPITR-1(config)#
the session is not possible also ?
R2921-8CPITR-1#service-module gigabitEthernet 1/1 sess
                                                  ^
% Invalid input detected at '^' marker.
R2921-8CPITR-1#
The routeur said that it's not a L3 port, so how to configure it to allow communication between the 2921 and the card ?
Is there a bug with that version I'm in 15.1(4)M4 ????
R2921-8CPITR-1#sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
R2921-8CPITR-1 uptime is 19 hours, 21 minutes
System returned to ROM by power-on
System restarted at 16:00:45 GAB Fri Sep 14 2012
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FGL1618119E
6 Gigabit Ethernet interfaces
2 terminal lines
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2921/K9          FGL1618119E
Technology Package License Information for Module:'c2900'
Technology    Technology-package           Technology-package
              Current       Type           Next reboot
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
uc            None          None           None
data          None          None           None
Configuration register is 0x2102
R2921-8CPITR-1#

Same issue here.
I just waited a few minutes and the interface went down and back up, this time it was a L3 interface.
My guess is that it was booting the switch module IOS, and it detected it until it was fully booted:
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:26:52.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
Apr 11 05:27:46.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
Apr 11 05:27:47.031: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
Apr 11 05:27:47.083: %LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to administratively down
Apr 11 05:27:47.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Apr 11 05:27:48.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to down
Apr 11 05:27:49.283: %IP-5-WEBINST_KILL: Terminating DNS process
Apr 11 05:27:52.499: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
Apr 11 05:27:53.087: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 16:50 by prod_rel_team
Apr 11 05:27:53.255: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Apr 11 05:27:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
Apr 11 05:28:21.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Apr 11 05:29:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down
Apr 11 05:29:22.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Router>en
Router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES unset administratively down down
GigabitEthernet0/0 unassigned YES unset administratively down down
GigabitEthernet0/1 unassigned YES unset administratively down down
GigabitEthernet0/2 unassigned YES unset administratively down down
GigabitEthernet1/0 unassigned YES unset administratively down down
GigabitEthernet1/1 unassigned YES unset up down
Vlan1 unassigned YES unset down down
Router#
Apr 11 05:29:46.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to upconf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g1/0
Router(config-if)#ip add 1.1.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
Apr 11 05:30:09.046: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:30:10.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Router(config-if)#end

I bought new music on itunes for th first ime in years and the updates erased all my music from my ipod and none of the new music that I bought was downloaded...a bunch of stuff I never heard of is now on my ipod. How do I reload my library?

I went to itunes for the 1st time in years and bought music. The updates removed all the songs on my ipod and did not downlaod my purchases. Instead I have a bunch of songs I never heard of. How do I reload my library on my ipod and get rid of the terrible junk that is on there now?

Was this a different computer/iTunes library than what it you had originally sync the iPod with? If so, that would explain why all of your content that WAS on your iPod was erased, since an iPod can only be synced with one iTunes library at a time.
As for your current predicament, you'll need to figure out how your iPod is configured to sync music and then adjust it so that the stuff you don't want on it is removed during the next sync operation and the music you DO want on it will be transferred over to it from iTunes.
B-rock

How to configure a JMS Queue

Hi,
I have an EAR file thai includes an EJB 3.0 module with a MDB. I use a Queue.
This is my code,
@Resource(mappedName = "jms/NotificationQueue")
private Queue notificationQueue;
@Resource(mappedName = "jms/NotificationQueueFactory")
private ConnectionFactory notificationQueueFactory;
public Customer update(Customer customer){
Customer updated = em.merge(customer);
try {
sendJMSMessageToNotificationQueue(updated);
} catch (JMSException ex) {
Logger.getLogger(CustomerSessionBean.class.getName()).log(Level.SEVERE, null, ex);
System.out.println("Customer updated in CustomerSessionBean!");
return updated;
private Message createJMSMessageForjmsNotificationQueue(Session session, Object messageData) throws JMSException
//Modified to use ObjectMessage instead
ObjectMessage tm = session.createObjectMessage();
tm.setObject((Serializable) messageData);
return tm;
private void sendJMSMessageToNotificationQueue(Object messageData) throws JMSException
Connection connection = null;
Session session = null;
try
connection = notificationQueueFactory.createConnection();
session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
MessageProducer messageProducer = session.createProducer(notificationQueue);
messageProducer.send(createJMSMessageForjmsNotificationQueue(session, messageData));
finally
if (session != null)
try
session.close();
catch (JMSException e)
Logger.getLogger(this.getClass().getName()).log(Level.WARNING, "Cannot close session", e);
if (connection != null)
connection.close();
layed inside a stateless EJB 3.0.
And the MDB looks as follow,
@MessageDriven(mappedName = "jms/NotificationQueue", activationConfig = {
@ActivationConfigProperty(propertyName = "acknowledgeMode", propertyValue = "Auto-acknowledge"),
@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue")
public class NotificationBean implements MessageListener {
public NotificationBean() {
public void onMessage(Message message)
try
Object msgObj = ((ObjectMessage)message).getObject();
if (msgObj != null)
Customer customer = (Customer)msgObj;
System.out.println("Customer with the following details has been updated:");
StringBuilder sb = new StringBuilder();
sb.append("Customer ID=");
sb.append(customer.getCustomerId());
sb.append(", ");
sb.append("Name=");
sb.append(customer.getName());
sb.append(", ");
sb.append("Email=");
sb.append(customer.getEmail());
System.out.println(sb.toString());
catch (JMSException ex)
Logger.getLogger(NotificationBean.class.getName()).log(Level.SEVERE, null, ex);
I have configured both "jms/NotificationQueue" and "jms/NotificationQueueFactory" inside OC4J server.
But when I try to deploy the EAR file, the server gives me the following error,
Operation failed with error: No destination location set for message-driven bean NotificationBean
How must I do to let the EAR file be deployed?
Thanks in advance
Jose

Mingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj

JMS - How to configure incremental redelivery intervals for an MDB

Hi all,
I noticed that when message delivery in an MDB fails, the time to the next delivery attempt for the message increases with every failed delivery. The intervals are 5, 10, 20, 40 and 60 seconds. After this the interval stays at 60 seconds.
Now I was trying to find out how to change this behavior, but did not find the appropriate configuration elements in the console or the documentation. What I found are the options to configure "Default Redelivery Delay" in the ConnectionFactory which is set to 0 and in the Queue "Redelivery Delay Override" which is set to -1.
Both of these settings do not explain the incremental delay. Can anyone tell me how to configure this? Is that part of the MDB deployment descriptors?
Thanks,
Chris

Hi Tom,
thanks again for your answer :-) I am sorry, i forgot to mention in my initial post, that i had a look at those parameters. But according to the documentation the default values for both are 60 seconds. In my MDB i did not set any of those, so it should not start at 5 seconds like it does but at 60 seconds. Additionally this suspension, I if understood correctly, should only kick in if the JMS resource (I figure this is the queue in this case) is unavailable, which is not the case in my scenario. And as a third the suspension described there is not growing exponentially as I experienced.
Sorry if I am just thick here, but the documentation just does not look like what I am looking for. Are there any misunderstandings on my side?
Thanks, Chris

How to configure a error queue for weblogic jms topic

Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
Mingzhuang

Mingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj

How to change the interval real substance for DG-Filling

Hi,
Im performing the filling process, to fill the dangerous goods master with data records from specification management. It seems that most data is transferred successfully. Although I receive the following error message in the import log.
1. What does the interval means?
2. What does the interval influence?
3. How to change the interval in the following configuration object:
EHS > Dangerous Goods Management > Interfaces: Filling and Distribution > Filling > Specify Assignment Objects for Filling
4. How can I find out about which field it is about?
5. Is this really required to change?
Error message
No data records available in interval real substance through
Message no. DGA402
Diagnosis
You attempted to fill the dangerous goods master with data records from specification management. However, no data records exist in the interval real substance through real substance .
System Response
The dangerous goods master is not filled with data records.
Procedure
If required, change the interval limits.
Thanks,
Roy Derks

Hi,
pl. try with table TDG79, the fields as sources in specification management can be assigned to the fields as targets in the dangerous goods master. The default Customizing settings in the standard system within the scope of making filling more flexible guarantee that the filling process functions in the same way as in earlier version.
in this table, options available for user exits in the table TDG79. for example, fill interval values or units that deviate from the standard units.
Activities
Edit the IMG activity Specify Assignment Objects for Filling in Customizing for Dangerous Goods Management.
If u find complete solution, pl update the thread.
with regards,
mahesh.

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

How to configure 3 different members under a single Month column

Hi SAP Gurus,
My client requirement is to show the report in following format, where under a Month column 3 different columns having
1) Quantity (Number of unit ) of a product,
2) its rate (Amount per unit), and
3) Total (amount)    will appear in a single report.
   I have Month as a Time Dim, while Qty, Rate and Total are members of account dim.
Que: How to configure such scenario in a single report?
Jan.2011
Product Category:            Qty (Input)   Rate (Input)   Total (Output)
Product 1
Product 2
Product 3
Product 4
Group1
     Where: Total = Qty X Rate
Thanks and Regards,
SouarbhD

Hi,
Use an EVDRE to create your input schedule. You need to have one row with products and 2 columns with time and account. Choose the memberset options as per the requirement. For the accounts, is total calculated with a dimension formula? If yes, then you just need to enter the values for quantity and rate and send the data. The total will be calculated by the system and will be displayed automatically.
Hope this helps.

How to configure an Alert message if communicationChannel(JMS) stops

All,
Is there a way how to configure an alert when the communication channel stops.
<b>Scenario:</b>
In the path Runtime workbench->Component Monitoring->Adapter Engine->Communication Channel monitoring, if we see that a communication channel has stopped(RED traffic light as Status), then can we trigger an alert notification for same.
Currently we have alrerts configured for any message/s failure in the JMS Adapter Framework. So can we trigger simmilar alerts when a comm channel stops(for whatever reason).
Thanks in advance
RK

Hi Sreeram,
Thanks for the quick reply.
We have a scenario where we activate individual channels at a given time. So in this case, Adapter will always be in RED as all queues are never running in our scenario.
So we need an ALERT to be triggered for individual comm channels. Is theer any way that you can think of ?
Thanks and regards
RK

How to configure reload interval on dashboard

Similar Messages

Maybe you are looking for