How to configure RMAN - Oracle EBS R12

Hi,
I have installed Oracle EBS R12 on OEL 5.6 and want to configure Backup strategy for Database. Database Version is 11.1.0.7. Currently Database is in Noarchivelog mode and want to take backup of database using RMAN. Can anyone guide me what are the steps to follow in order to achive that ?
Regards,
Priyanka

You can use RMAN to take backup in noarchive log mode.However you will be able to take cold backup only.
Use this,
RMAN> run {
shutdown immediate;
startup mount;
backup database;
alter database open;
Note:
RMAN does not permit you to make inconsistent backups when the database is in NOARCHIVELOG mode. If you employ user-managed backup techniques for a NOARCHIVELOG database, then you must not make inconsistent backups of this database.
Edited by: user12943013 on Apr 13, 2011 5:20 PM

Similar Messages

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

How to upload data into form of Oracle EBS R12 using ATS ver 9.0

Hi experts,
Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way)
For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload the data, however it just can upload one by one record, cannot upload multi record at same time. Moreover if the performance of server is low, so I will get the issue when using dataloader.
Thanks in advance
Best Regards
Hieu

Hi you can create Virtual users to enter data. Note than you have to name the objects accordingly.
For Example default recording provided by Open script is ObjectNAME_(Index No of the object).
when you record one iteration the name of any object would be ObjectNAME_(0)
You can then create virtual users so the index will increment as the total number of Virtual users increases. Also you have to handle which row of your test data would get mapped to which Virtual user in the script run session.
Thanks

How to deployed jsp report to Oracle EBS R12

Hi,
The jsp report deploy using Oracle Report. How to deploy the jsp report to Oracle EBS R12 and calling jsp report through Self-Service Menu.
Thank you.
Wilson

Hi,
What tool you have used to develop those pages?
Please see the docs referenced in this thread.
I want to start OAF R12 please give me PDF
I want to start OAF R12 please give me PDF
Thanks,
Hussein

How to create a .exe script to start and stop Oracle EBS R12 in Linux

Hello,
I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.
Ali

I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Autostart+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Auto+AND+Start+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Managing Server Processes
http://docs.oracle.com/cd/E18727_01/doc.121/e13675/T530130T530133.htm#5274555
Thanks,
Hussein

Oracle ILM assistant for Oracle EBS R12.1 application with 11.1.0.7 DB

Oracle ILM through its ILM Agent, which is a database component provides option for data archiving.
Need to know how ILM agent can be used against Oracle EBS R12 and the options available:
a. Does ILM assistant map to industry Compliance requirements and can we add or modify based on additional Client requirements
b. Is this configured for all components and are the business rules (default) taken care in terms of archiving related data, if not what are the options available
c. What are the options to archive data
i. On Same and archive database
ii. Other RDBMS (mysql, or open source database)
d. Access to archived data
i. Is archive data available from the existing application or only from backend database
ii. Does ILM assistant provide options to access archived data (same Oracle RDBMS or heterogeneous database)
e. Retention options
i. Does ILM assistant provide multi tier retention options for archived data for different range (# of years)
Edited by: user9031099 on May 9, 2013 11:00 PM
Any update on my query please...?

Limits the Preferred Read-Write Tablespace to only 1 where as in Oracle EBS we would require multiple tablespaces to be Preferred Read Write. Can we extend the functionality of ILM assistant to have multiple Read-Write tablespaces...?

Oracle EBS R12 DR - Status Column Shows N in FND_NODES

Hi,
We implemented DR for Oracle EBS R12 (2-Node Oracle 10gRAC, 2-Node Apps) using Oracle Data Guard.
During the Failover testing we noticed that the Status shows N for the DB Nodes and First Apps Node. It shows Y only for the 2nd Apps Node in the FND_NODES (Autoconfig was last run on the 2nd Apps Node):
SQL> select node_name,status from fnd_nodes;
NODE_NAME STATUS
AUTHENTICATION
DRDBSVR2 N
DRDBSVR1 N
DRAPSVR2 N
DRAPSVR1 Y
But in the Primary Node the Status is Y for all the nodes.
SQL> select node_name,status from fnd_nodes;
NODE_NAME STATUS
HOAPSVR1 Y
AUTHENTICATION
HODBSVR2 Y
HODBSVR1 Y
HOAPSVR2 Y
I would like to know what could be the reason for the Status showing N for the DB Nodes and N for 1st Apps Node in the DR env during the Failover Testing. But I was able configure the DR env and bring up the application. Able to Login to the application also. Does the status in FND_NODES matter?
I did executed SQL> exec fnd_conc_clone.setup_clean before configuring the DR env.
Regards,
Thiru

hi thiru
I would like to know what could be the reason for the Status showing N for the DB Nodes and N for 1st Apps Node in the DR env during the Failover Testing. But I was able configure the DR env and bring up the application. Able to Login to the application also. Does the status in FND_NODES matter?
I did executed SQL> exec fnd_conc_clone.setup_clean before configuring the DR env.did you run auto config to populate the tables?
please confirm you have a clean autoconfig enviornment
first take backup of FND_NODES and the perform cleaning
please see
How to get a clean Autoconfig Environment ? [ID 391406.1]
AutoConfig Does Not Populate tnsnames.ora With FNDSM Entries For All The Nodes In A Multi-Node Environment [ID 1358073.1]
Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12[Article ID 387859.1]
Concurrent Processing - Steps To Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
Configuring Applications Node Services in Oracle E-Business Suite Release 12 [ID 406558.1]
On a R12 Multi-Node Install -- Why do all Middle Tiers run all Services? [ID 415385.1]
;) AppsMasti ;)
Sharing is Caring

Oracle EBS R12 Pre - Implementations phase question air

Oracle EBS R12 Pre - Implementations phase question air
Posted: Jun 30, 2009 10:22 AM Edit Reply
Dear all Gurus,
We are going to implement Oracle EBS r12, for industrial concern, we have following quires if any peer may suggest.
1) we heard the oracle R12 has build new release with 11g db , is it been practical for choosing it for corporate ???
2) Linux Read hat which version is more stable like 5 releases is compatible with R12 new release?
3) We are also thinking for 64 bit architecture rather than 32 bit, could any one figure out the practical pros and cons for this.
4) We are also wondering about the server machine brand and its configurations like HP DL380 G6, DELL 2850? could any one share abut his experience about the same.
5) What sort of Server configurations (Processor , 2way -4way , RAM , HD and other accessories ) for r12 Multi node setup for 150 clients (DB Server , Apps Server , Test Prod )
6) What should be backup strategies like tap backup and how much space requirements we must have provisioned for retaining almost 2~3 month backup.
7) Application implementations methodologies?
8)
I know to address our queries would be time consuming for you bust peoples , but I would really oblige for being shared your journey this would defiantly the PATH way for other like mentoring for others.
looking forward your valuable instructions ASAP.
Thanks & Best Regards
Muhammad Waseem
Manager IT
Neee-Has Textiles Divisions
31-Q Gulberg II Lahore
Pakistan
92-0333-4240949

Duplicate post.
Oracle EBS R12 Pre - Implementations phase question air
Oracle EBS R12 Pre - Implementations phase question air

Step By Step Implementation of RAC in Oracle EBS R12 (version 12.0.4)

Hi,
Can anyne suggest me any Document in metalink or any other useful document on the
*"Step By Step Implementation of RAC in Oracle EBS R12 (version 12.0.4)"*.
My Database Version is 10g Enterprise Edition Release 10.2.0.4.0 and my Platform is HP-UX ia64.

How To Find Out The Example of The LOCAL_LISTENER and REMOTE_LISTENER Defined In The init.ora When configuring the 11i or R12 on RAC ? [ID 744508.1]
1072636.1 - Oracle E-Business Suite Release 12 High Availability Documentation Roadmap
Please check Hussein's discussion before
Rac and R12
R12 with RAC
Rac and R12
Moving from NON-RAC to RAC
R12 and RAC
Re: R12.1-RAC
EBS R12 on Linux with RAC

Mapping Roles/Groups between Oracle EBS R12 and OBIEE 11g

Hi,
We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12.
But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior experience with EBS as source system.
Can anyone tell how to map between obiee groups with Oracle E-Business suit R12
Is there any document link or notes regarding this.
Any information regarding this will be a great help.
Thanks in advance

Hi,
I am also looking for the solution to implement SSO of OBI 11g with EBS r12, what i understand from your post that you have configured SSO between OAM and EBS R12.
Below is the link to configure SSO between EBSR12 and OBI 11g.
http://www.astcorporation.com/images/PDFs/White_Papers/2012/AST_White_Paper-EBS-OBIEE_11g_Integration.pdf
I want one clarification from you , once you read the above article what is your opinion do we require OAM integration if we want only EBS SSO with OBI11g ? I am bit confused in this ?
Whats the use of OAM in this integartion ?
Can you please help me.
Thanks in Advance.
Regards,
Tarang Jain

Heterogeneous oracle EBS R12 installation

To install Heterogeneous oracle EBS R12 ( database is in linux and oracle EBS is on Solaris), we don't know how to proceed. Please clarify it.
1) Do you have Heterogeneous oracle EBS R12 binaries to install ?
2) Please guide to install Heterogeneous oracle EBS R12
Please suggest us, how to proceed with installation of R12.
Details :
EBS version : 11.5.10.2 on Solaris 5
Database version : 10.2.0.4 on linux 5 64 bit .
Regards .

Hi;
This config is called split configuration. Please see below links:
Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 [ID 343917.1] <search as split
Using Oracle EBS with a Split Configuration Database Tier on 11gR2 [ID 946413.1]
Regard
Helios

Want to Integrate ESSO with Oracle EBS R12

Hi,
I am newbie to ESSO, want to enable single sign on facility with my Oracle EBS R12 using windows logon as primary authentication. Can anyone guide me how to proceed? can I use ESSO to solve this issue? if yes then please guide me with steps to proceed and achieve desired results.
Reply awaited..
Regards,
Priyanka.

Priyanka Pawar wrote:
Thanks for your valuable reply.... Gone through documentation and it is really very helpfull. I can now proceed with downloading ESSO and installation of ESSO-LM.
As it is 1st time i am tring to implement ESSO, is it possible to install it on my Windows XP PC for testing it's working, installation and configuration? Yes. You will need Active Directory or ADAM for storing metadata. ADAM can be installed on your PC too. There's a Deployment Guide in the docs that describes this.
>
What about Template creation? should i follow "Template Configuration and Diagnostics for Web Applications" for creating Template for accessing Oracle EBS R12 application?Yes

Unable to open XML report in Oracle EBS r12

Hi,
I have new installation of Oracle EBS r12 (12.1.1) on linux.
To test the XML report, I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
I am unable to see the output for XML reports. The report completes without error, however I cannot open the output file.
The browser opens for fraction of a second and then closes down. My client machine is Windows 7 and I used Microsoft words 2010 to build template
I used the 5.7.201 version of BI publisher to create the rtf template.
Please help me to resolve this issue.
Thanks

I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
looks like xml publisher report, so output for concurrent must be 'XML'
******* I have changed the output of concurrent program 'Active Users' from 'Text' to 'XML'
I am unable to see the output for XML reports.
how you see it?
******* I tried to open the report by clicking on 'Output' button from view request screen of EBS.
did you try after concurrent completed check 'diagnostic -> view xml'?
******* I haven't tried this. Will do now.
The report completes without error, however I cannot open the output file
what is error?
******* There is no error, the request completed successfully. When I tried to open the output file by clicking 'output' button, the browser doesn't open.
did you check OPP log?
******* There is nothing in the OPP log.
if concurrent failed so first of all check your code - data template and package (if used)
******* I used the standard EBS report 'Active Users' and just changed the output from 'Text' to 'XML' and attached the rtf template.

How to install the Oracle Apps R12 with an existing OAS 10g

Hi All,
I am planning to install the Oracle Apps R12 and I already downloaded the media-pack from edelivery.oracle.com.
But I am not sure how to do it because I have tree-tier architecteur at home :
One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
One computer with XP OS -- Client tier
Could any one explain me how to install it?
Regards,

But I am not sure how to do it because I have tree-tier architecteur at home :
One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
One computer with XP OS -- Client tier The above is two tier architecture (not three tier) as the client tier is not considered as a tier in Oracle Apps installation.
Could any one explain me how to install it?Do you already have a Database and Oracle AS10g installed? Please elaborate more.
Oracle Apps R12 comes with 11gR1 database, and to do multi-node installation please refer to these threads.
R12 Multinode installation
Re: R12 Multinode installation
Install oracle EBS R12 on 2 machines
Install oracle EBS R12 on 2 machines
To upgrade the database later to 11gR2, please refer to:
11gR2 11.2.0.2 Database Certified with E-Business Suite
http://blogs.oracle.com/stevenChan/2010/11/db_11gr2_11202_ebs.html
Thanks,
Hussein

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

How to configure RMAN - Oracle EBS R12

Similar Messages

Maybe you are looking for