How to configure SAP CCM to a non SAP system

Hi all,
What should be my landscape if we have to go for an external catalog linked to a non SAP system?
Our requirement is like this :
The customer has nonsap system and they want to go only for catalog content management only for vendors like DELL who maintain products of their own
(external catalogs). i-e., they will create PO from the nonSAP system and will send it to vendor selecting the products from the DELL's website.
How should we go with this? Will SAP CCM support this with XI.
Kindly explain me the following :
What should be my landscape and config?
Can anyone explain please?
Regards,
Sridhar.

Dear Sridhar,
Firstly - If you customer has a non SAP system and want to use SAP CCM this is not such a viable option as in any case the CCM requires a 640+ web application server to function, while it is an add on solution independant of SRM_SERVER, it is not independant of SAP WEBAS!
So, to use the SAP CCM the customer requires either a satellite location with a SAP WEBAS or their own to host this application. From here, the system would need to be configured and conform to the details in the OCI 4.0 documentation for either XML communication or OCI interface communication, so, I guess, at least from my perspective using a SAP CCM system in conjunction with an external ERP system is not the best option when it may be easier to integrate other catalog solutions into such a setup.
Regards,
Jason

Similar Messages

How to configure sap to use gmail as smtp server?

Hi experts,
I need to know how to configure gmail as my smtp server. In the scot transaction I don't see anywhere where to specify whether it is a ssh connection, ports for secure smtp, username, password.
Does anyone know how to configure sap to use gmail as the smtp server?
I've seen some similar threads about this, but they are of no help. Although they are classified as answered, in most cases the reason they are answered is because the person who made the query dropped the cause trying to make it work. I'd like to know for sure is this is possible or not.

Hi Camilo,
You can't set up gmail as your smtp server to handle this. gmail is an email server which generally are based on POP protocol. now for SAP to send mail to gmail, you would need one SMTP capable server which can relay those message received from SAP to configured email address.
As of WAS 6.10 SAP kernel supports SMTP without more components. i.e e-mails can be sent (or received) from the SAP system to each SMTP-compatible mail server. see SAP note 455140 for more details.
Hope this clarifies your doubt.
http://en.wikipedia.org/wiki/SMTP_server
Regards,
Debasis.

How to create SAP System

Hi all,
Is this possible to assign the role, based on the organization structure?
In which SAP system stores organization structure in it.
How to create the SAP system to store my organization structure through EP.
Helpful answers will appreciate.
Thanks.
Regards,
Kathiresan R

Hii
How to create sap system:
Steps:
Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Thanks :
Dont forget to give rewards if usefull.

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00                           ( Windows NT )
1. Connect. test with "dbmcli db_state"                         Successful
2. Connect. test with command mode "dbmrfc db_state"            Successful
3. Connect. test with session mode "dbmrfc db_state"            Successful
4. Connect. test with "native SQL" ( LCA )                     No connection
   SQL Code: 4008
    POS(1) Unknown user name/password combination
   For detailed information, see the developer trace for work process:            1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR       program IDOCTEST not registered
M *
M * TIME        Fri Jan 07 18:15:25 2011
M * RELEASE     701
M * COMPONENT   SAP-Gateway
M * VERSION     2
M * RC          679
M * MODULE      gwr3cpic.c
M * LINE        1778
M * DETAIL      TP IDOCTEST not registered
M * COUNTER     715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

How configurate a SAP System Registry in Web Dynpro ?

Hi everybody,
When i deploy a web dynpro application,
i obtain the following error:
"No default system is configured in SAP System Registry"
In menu Window->Preferences->SAP AS Java,
i need to register SAP instance.
However, i don't know how to retrieve the following information of my SAP system:
- Instance Host ?
- Instance Number ?
Need your help!
Thanks
Rodolphe

localhost
0

How to maintain SAP system to provide web service

Hello,
I have created web service. I did configuration via WSADMIN and WSCONFIG (in my system SOAMANAGER is not available). I have checked SICF and web service is activated. Unfortunatelly, web service is not working.
Do I need to maintain something in the system to be able to provide web-service?
Thanks&regards,
Jirka Faltin

Hello,
thanks for reply.
So I can see WSDL file, which was generated by SAP for this web. service. I have URL adress of endpoint. I have very limited access to customer network. I have remote desktop and only thing is internet explorer and SAPGui. So if I open URL adrres of endpoint in internet explorer, I see Page not found error.
This problem appear after copy of production client to test client. On dev client, web service is working and also on test client was working before client copy
Thanks&regards,
Jirka Faltin

How can Get SAP SYSTEM MESSAGES Dynamically

i developed a report program and from that call one bdc program and pass the data to that. I can get bdc messages but how can i get SAP SYSTEM MESSAGES dynamically if possible how to store it.
thanks in advance,
your reply will get good points.
From Maran,India.

Hi Maran,
You can use the followin code after call transaction;
Make sure that u add the message option during call transaction
DATA: i_messtab TYPE TABLE OF BDCMSGCOLL.
CALL TRANSACTION p_tcode USING p_bdcdata
                 OPTIONS FROM l_params
                 MESSAGES INTO i_messtab.
    LOOP AT i_messtab INTO wa_messtab.
      CALL FUNCTION 'FORMAT_MESSAGE'
       EXPORTING
         id              = wa_messtab-msgid
         lang            = sy-langu
         no              = wa_messtab-msgnr
         v1              = wa_messtab-msgv1
         v2              = wa_messtab-msgv2
         v3              = wa_messtab-msgv3
         v4              = wa_messtab-msgv4
       IMPORTING
         msg             = l_message
      EXCEPTIONS
        not_found       = 1
        OTHERS          = 2
      IF sy-subrc <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
Regards,
Saji.
Message was edited by: Sajith Hari

How to configure sap backup in DB13

Dears:
In DB13, i create Whole database online + redo log backup in backup calendar, but i don't know where i can configure to make the backup data store into local harddisk or tape.
If store in local harddisk,where can i specify the path which the backup data to save.
If store in tape, where can i specify the tape name?

You need to configure the tapes and backup location on you init<sid>.sap (if you're using oracle)...
Read,
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/fb1c42128a5733e10000000a155106/content.htm
Regards
Juan

How to configure SAP ECC DMS content repository with CRM Services Object

hi,
we have SAP Document management system which is currently integrated with SAP R/3 Ecc system .
with ref. to sap standard functionality i am able to upload the document in DMS content repository through SAP R/3 Ecc System as below.
step-1 ,T.code:CV01n
a.     create - DMS Documents
b.     Oupload Scanned documents in DMS system
c.     select content repository
d.     Save Document
now, in same manner i want to store business documents in SAP ECC R/3 DMS content repository using CRM services trnsaction"CRMD_ORDER". kindly guide me suitably.
regards,
sunil

i am explaining your proble
a.    create - DMS Documents
b.     Oupload Scanned documents in DMS system
c.     select content repository
d.     Save Document
after saving open to document in cv02n and track status of doc i.e. AR CR & RE
if RE status is there the it will repositor at server
Regards,
Sanjeev

How to configure SAP 4.7 to Oracle 9i Real Application Cluster ?

We are using SAP 4.7 running on Oracle 9i with HP-UNIX clustering.
If we change our existing SAP 4.7 for Oracle 9i Real Application Cluster, is it very complicated ?
Do we need to re-install SAP and Oracle ?

Both 4.7 and Oracle 9 are already out of support.
If you plan to use RAC then I'd first upgrade the application and the database and then implement RAC. You won't have support for your environment without additional costs.
Markus

How to Configure Windows NT Mail on Alert Manager - System - Option

Hi
This is Regarding Oracle Financial Application.
In 11i, Alert Manager, there is an option to configure Windows NT Mail to Send and Recieve Mails (Oracle Alerts-Message).
Anybody knows, what is the configuration?
Our Company Mail Server is Window NT.
But, Our Oracle Application Server is Solaris Machine.
We want to configure the Mail settings .. while sending Oracle Alert from Oracle application, it should reach our NT Mail server.
In Unix settings Alert is working fine.
But, How to do the Windows NT Mail settings on this Application ?
Please reply on the following mail id : [email protected]
It's very urgent.
Thanks,
Sheeja.

Hi
This is Regarding Oracle Financial Application.
In 11i, Alert Manager, there is an option to configure Windows NT Mail to Send and Recieve Mails (Oracle Alerts-Message).
Anybody knows, what is the configuration?
Our Company Mail Server is Window NT.
But, Our Oracle Application Server is Solaris Machine.
We want to configure the Mail settings .. while sending Oracle Alert from Oracle application, it should reach our NT Mail server.
In Unix settings Alert is working fine.
But, How to do the Windows NT Mail settings on this Application ?
Please reply on the following mail id : [email protected]
It's very urgent.
Thanks,
Sheeja.

After trial with adobe pro XI I ordered the program ($14.95). Order has been confirmed. But I cannot get it to download on the computer in question. I continually end up back with trial program. How do I get to my full, non-trial system?

Used trial version of AA pro XI. now tried to order regular XI version ($14.95/ mo.). Order went thru but now I cannot get access to the newly ordered program. What do I need to do?

I am handicapped right now, i.e., the machine I wanted to load with the AA pro XI is at home and I am at work right now. Through work I have AAproXI loaded on two machines (here in my office). I'll have to fuss with the home machine tonight. Thanks for your help. I may need to radio back to you.
J. Craig Currie
[cid:[email protected]]
1600 Market Street, Suite 2500 - Philadelphia, PA 19103
[email protected]<mailto:[email protected]> - www. phillylaw.net
T: 215-564-0833 - Toll Free: 877-478-8529 - F: 215-523-7911

How to Configure 6 Different VAT rates in the System

Hi All,
I have a scenario here for VAT. My client wants this VAT rates to be in the sales.
S1      VAT N/A
S2      VAT 0%
S3     VAT 6%
S4     VAT 19%
S5     VAT within EU 0%
S6     VAT Export 0%
I have tried to maintain 6 condition types but the billing will not pick up due to there will also be 6 different tax rates in the customer master tax classification.
I have tried to make these rates with both options of tax exempt and dutiable so that if user decided on VAT 19% the rest of the rates should be zero and the end result should be VAT 19% is dutiable but at the billing header it seemed to take the first VAT rate which is VAT N/A which is a zero as it goes by the order 0,0,0,1,0 and 0.
Appreciate if someone can englighten me on other better workarounds or solutions. Can't think of any for now.
Thanks in advance for your inputs!

Hi,
This can be done by using different tax codes.
Create different tax codes for all tax rates.
Create diffrent customer tax classification and material tax calssification.
Maintain condition records as follows
Plant region/Customer region/tax classification for customer/tax xlassification material.
Maintain records here and assign the tax code here.
Make sure your VAT condition category is D - taxes.
Hope your problem will be solved
Regards
Rasik Waghela

How to import language in SRM5.0 non unicode system

hi gurus!
my client wants me to install chinese and french language for thier demo purpose in SRM5.0.
i have downloaded the language packs required for that., but they are not in car/sar format. where in SMLT its asking in car/sar format
please assist me in this
thanks & regards
KIRAN

I do not understand in what at you a problem.
you create in se38 --> RSCPINST french language?
then you go to smlt and create the french language -->
then press the import package and in Path write the way to folder like
servername\d$\language\LANG1
then press "Find Packages".
in Available languages see the french language (If correctly will specify a full way)
Then choose or "Start on instance" or simply press Execute
Wait transport.
in rz10 create the zsca/installed_languages (in my case ER --> Eng+ Russian)
Restart the server.

How to configure Mail Alerts in SAP R/3 System.

Hi,
I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
Regards,
Kiran.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

How to configure SAP CCM to a non SAP system

Similar Messages

Maybe you are looking for