How to configure sap maxdb client to connect to SAP ERP system (SAP HR)
Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client
i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4008
POS(1) Unknown user name/password combination
For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani
Similar Messages
-
How to configure sap to use gmail as smtp server?
Hi experts,
I need to know how to configure gmail as my smtp server. In the scot transaction I don't see anywhere where to specify whether it is a ssh connection, ports for secure smtp, username, password.
Does anyone know how to configure sap to use gmail as the smtp server?
I've seen some similar threads about this, but they are of no help. Although they are classified as answered, in most cases the reason they are answered is because the person who made the query dropped the cause trying to make it work. I'd like to know for sure is this is possible or not.Hi Camilo,
You can't set up gmail as your smtp server to handle this. gmail is an email server which generally are based on POP protocol. now for SAP to send mail to gmail, you would need one SMTP capable server which can relay those message received from SAP to configured email address.
As of WAS 6.10 SAP kernel supports SMTP without more components. i.e e-mails can be sent (or received) from the SAP system to each SMTP-compatible mail server. see SAP note 455140 for more details.
Hope this clarifies your doubt.
http://en.wikipedia.org/wiki/SMTP_server
Regards,
Debasis. -
I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelãoplease disregard this answer.
Message was edited by: Marcelão -
How to configure SAP CCM to a non SAP system
Hi all,
What should be my landscape if we have to go for an external catalog linked to a non SAP system?
Our requirement is like this :
The customer has nonsap system and they want to go only for catalog content management only for vendors like DELL who maintain products of their own
(external catalogs). i-e., they will create PO from the nonSAP system and will send it to vendor selecting the products from the DELL's website.
How should we go with this? Will SAP CCM support this with XI.
Kindly explain me the following :
What should be my landscape and config?
Can anyone explain please?
Regards,
Sridhar.Dear Sridhar,
Firstly - If you customer has a non SAP system and want to use SAP CCM this is not such a viable option as in any case the CCM requires a 640+ web application server to function, while it is an add on solution independant of SRM_SERVER, it is not independant of SAP WEBAS!
So, to use the SAP CCM the customer requires either a satellite location with a SAP WEBAS or their own to host this application. From here, the system would need to be configured and conform to the details in the OCI 4.0 documentation for either XML communication or OCI interface communication, so, I guess, at least from my perspective using a SAP CCM system in conjunction with an external ERP system is not the best option when it may be easier to integrate other catalog solutions into such a setup.
Regards,
Jason -
How to configure Rails database.ympl to connect to Oracle XE DB on Windows
How to configure database.yml file in a Rails application to be able to connect to Oracle XE DB?
I'm on Windows XP, Ruby 1.86, Rails 2.3.2. with oracle adapter.
When I tried
development:
adapter: oracle
encoding: utf8
database: localhost:1521/incentives,
host: localhost
pool: 5
username: SYSTEM
password: adminI got the below error (sorry for the stack trace traduction from French):
rake aborted!
ORA-12514: TNS : listening process doesn't know the required service in the connection description
rake aborted!
Invalid escape character syntax: /C:\Documents and Settings\myusername\My Documents\rails projects\myrailsproject\Rakefile/
c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `standard_exception_handling': Invalid escape character syntax: /C:\Documents and Settings\myusername\My Documents\rails projects\myrailsproject\Rakefile/ (RegexpError)
from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `find'
from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `each'
from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `find'
from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `standard_exception_handling'
from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:1974:in `run'
from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/bin/rake:31
from C:/ruby/bin/rake:19:in `load'
from C:/ruby/bin/rake:19database: localhost:1521/incentives,I don't know your environment, but the error seems quite clear... should that trailing comma be there ?
-
Two SCM Systems connected to one ERP System
Hello Experts,
Here again I got a doubt.
Is it technically possible to connect two SCM Systems via CIF to one ERP System?
Because I heard that we could connect more than one ERP System to one SCM System, but not vice versa.
If you have seen a system in production like this, what are the pros and cons of having such a scenario?
Expecting your valuable replies!
Thanks and Best Regards,
SureshHi,
technically it's no problem to connect two or more SCM systems to the same ERP system. We have one for DP/ PP/DS, one for EWM and one for SNC connected to the same R/3 systems. You however might get problems with the bom explosion for planned orders being sent from SCM to R/3.
The bom explosion uses field MARC-APOKZ which is maintained automatically by CIF. If there are multiple SCM system using CIF for product master data the field might not be set up correctly and the bom explosion could be wrong.
As a solution SAP provided OSS note 1576703.
Regards.
Hubert -
How to configure ASA to allow activesync connections ?
To allow Activesync connections (between smartphones and an internal Exchange server) thru an ASA, I think about 3 or 4 potential solutions :
1) do a NAT on the Exchange server and allow activesync TCP connections from any IP to the Exchange server : I tested that and this works, but it is not the most secure solution we can imagine;
2) use a Clienless VPN SSL ASA configuration : I tried it, but got problems certaintly related to the fact that the Activesync client, installed on my Android/Samsung smartphone, does not seem to be able vto pass properly thru the ASA Portal to reach the Exchange server;
3) use an Anyconnect VPN ASA configuration : I tried it , but did not manage to install or use any of the Samsung Anyconnect client available on Android Market; by the way, I saw, in the Anyconnect VPN Client Admin Guide 2.4, that an ActiveSync MSI is available from CISCO (
anyconnect-wince-ARMv4I-activesync-AnyConnectRelease_Number-k9.msi), but I don't see any details about how it is supposed to be used except that it is for Windows environment only, so, not for an Android phone, but I have Windows Mobile smartphones to integrate too, so, maybe it can help me in this case ;
4) if Clientless nor Anyconnect solutions can't work, it might be better to use the ASA Cut-Through proxy function to get a more secure solution than the first one listed above; but I was not successful either with this cut-through proxy function
Any ideas or examples about how to allow activesync connections thru ASA would be welcomed
thanks in advanceHi,
Generally ASA with CSC will support HTTP,FTP,SMTP,POP3 Scaning and Filtering.
From version ASA IOS 8.4.2 and CSC 6.6.1125.0, it will support HTTPS filtering also.
But here one limitation is that Https filtering will not support earlier versions of internet explorer 9, i.e if you want HTTPS filtering you must use Internet explorer 9 or after versions( As you know that Windows XP machines won't support internet explorer 9). But with firefox HTTPS filtering will support from versions 4.
For your reference use below 8.4.2 release guide
http://www.cisco.com/en/US/docs/security/asa/asa84/release/notes/asarn84.html
Release notes for CSC version 6.6.1125
http://www.cisco.com/en/US/docs/security/csc/csc66/release/notes/cscrn66.pdf
Basic configuration of the CSC
http://www.cisco.com/en/US/docs/security/csc/csc6.1.1569.0/administration/guide/cscappa.pdf
Sending traffic to the CSC module (using ASDM and CLI)
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808dea62.shtml
The troubleshooting guide:
http://www.cisco.com/en/US/docs/security/csc/csc63/administration/guide/csc8.html#wp1147829
Hope this will help you...
Do rate help ful posts..
Regards,
Janardhan -
How to prevent B radio clients from connecting
How can I enforce only G & A radio clients from being able to connect to my 1131AG Access Points?
I know that when a B client connects it automatically brings all the G clients down to B due to the fact that G is backward compatible but does not operate at 54 mbps with a mix of B clients.Hi Sparky,
Here is one method;
To set the 2.4-GHz, 802.11g radio to serve only 802.11g client devices, set any Orthogonal Frequency Division Multiplexing (OFDM) data rate (6, 9, 12, 18, 24, 36, 48, 54) to Basic.
Note: The client must support the basic rate that you select or it cannot associate to the wireless device. If you select 12 Mbps or higher for the basic data rate on the 802.11g radio, 802.11b client devices cannot associate to the wireless device's 802.11g radio.
From this good doc;
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32rf.html#wp1083005
Hope this helps!
Rob -
How to configure an always on pppoe connection
Hi all..This is my first post here...I had a pppoe internet connection that was working with "sudo pppoe-start " command flawlessly. Later I have entered my username and password (pppoe) in my modem , so that I can use it as an "always on" type connection. Now how can I remove my earlier pppoe-setup files and configure my system to connect with internet ? ( mine is a usb-modem).. I have tried "Beginner's Guide section" of Arch Linux and entered static ip ,dns and default gateway. Nothing happens so I tried to make "network.service" file and start network service via systemctl method. Sadly none of these methods are not connecting with my internet. Ping also shown as unknown host.. I don't know how to fix this as I'm newbie in Arch Linux ! Could you please help me to connect my Arch system to internet ........ ( Pardon with my bad English )
Last edited by Jayasankar (2013-07-10 18:47:39)Still working on it.
Created a translation pattern to call 9.
-> Create a new partition "9accessPT
-> Create a new CSS "9accessCSS"
-> Add the 9accessPT to 9accessCSS
-> Create a translation pattern, with a blank translation translation pattern and a called party transform mask "the number you want dialed" **********If i enter 9and a number, it automatically calls out, if i put only a 9 in the called party transform mask it does not.********
Urgent priority is checked.
-> Add the calling search space to the phone.
I'm thinking its not hitting a valid route pattern, since the 9 has already been dialed.
Still working on it.
Any ideas?
If you get it working, let me know. -
Hi ,
If we have a specific server say 10.10.10.10 (abc.co.in) on which we are working, Then under RZ12 we make the following entry as :
LOGON GROUP INSTANCE
parallel_generators abc.co.in_10 ( Lets assume : The instance number is 10 )
Now in SM59 under ABAP Connections , I am giving the following technical settings:
TARGET HOST abc.co.in
IP address 10.10.10.10
Instance number 10
Now if we have a scenario of load balancing servers with following server details (with all servers on different instance numbers ) :
10.10.10.11
10.10.10.13
10.1010.10
10.10.10.15
In this case how can we make the RZ12 settings and SM59 settings such that we don't have to hardcode any IP Address.
If the request is redirected to 10.10.10.11 and not to 10.10.10.10 , in that case how will the settings be.
Regards,
SHUBHAMHi,
No one using FMS behind a load balancer? No one using RTMPT? -
How to configure sap backup in DB13
Dears:
In DB13, i create Whole database online + redo log backup in backup calendar, but i don't know where i can configure to make the backup data store into local harddisk or tape.
If store in local harddisk,where can i specify the path which the backup data to save.
If store in tape, where can i specify the tape name?You need to configure the tapes and backup location on you init<sid>.sap (if you're using oracle)...
Read,
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/fb1c42128a5733e10000000a155106/content.htm
Regards
Juan -
How to configure the combobox while using connecting throught the remote URL.
I am using the combobox in the server for the selection of process stages and is working fine.
Now I want to connect the combobox through the remote URL connection of my client system. So that it will be updated simultaneously in client and server.
While connecting through the remote URL it is giving the message the to enter the value property.
I am not able to understand what value is to be entered in this option.
Please advise the solution at the earliest.
Best Regards,
Naresh SainiDear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team -
How to configure SAP ECC DMS content repository with CRM Services Object
hi,
we have SAP Document management system which is currently integrated with SAP R/3 Ecc system .
with ref. to sap standard functionality i am able to upload the document in DMS content repository through SAP R/3 Ecc System as below.
step-1 ,T.code:CV01n
a. create - DMS Documents
b. Oupload Scanned documents in DMS system
c. select content repository
d. Save Document
now, in same manner i want to store business documents in SAP ECC R/3 DMS content repository using CRM services trnsaction"CRMD_ORDER". kindly guide me suitably.
regards,
sunili am explaining your proble
a. create - DMS Documents
b. Oupload Scanned documents in DMS system
c. select content repository
d. Save Document
after saving open to document in cv02n and track status of doc i.e. AR CR & RE
if RE status is there the it will repositor at server
Regards,
Sanjeev -
How to configure SAP 4.7 to Oracle 9i Real Application Cluster ?
We are using SAP 4.7 running on Oracle 9i with HP-UNIX clustering.
If we change our existing SAP 4.7 for Oracle 9i Real Application Cluster, is it very complicated ?
Do we need to re-install SAP and Oracle ?Both 4.7 and Oracle 9 are already out of support.
If you plan to use RAC then I'd first upgrade the application and the database and then implement RAC. You won't have support for your environment without additional costs.
Markus -
How To Configure GP For Client DC on Windows Server 2003
Dear all,
I have been installed windows server 2003 and make one DC on my server. And i create several group and want to make policy for that each group. For example I have created '2014' group and all user who join my dc and registered as a part of '2014' group couldn't
access their browser such as Firefox and IE and couldn't access their bluetooth. How can I make it possible?
Thanks before.
Warm Regards,Hi Denni Sembiring,
Could you clarify your question “all user who join my dc and registered as a part of '2014' group couldn't access their browser such as Firefox and IE and couldn't access their
Bluetooth”, are you want to realize to limit some user can access the specific software and computer device? GPOs can be linked to the following levels:
•Site
•Domain
•Organizational Unit
We can not link GPO to group, if you want to limit specific user can only access specific software you can refer the following KB to restrict user access.
The related KB:
How To use Software Restriction Policies in Windows Server 2003
http://support.microsoft.com/kb/324036
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
Satellite L - How to adjust webcam settings?
Howdy, How can I adjust the settings in my web cam to take a delayed picture? Thanks
-
It seams as if all my workspaces, tools, and effects in Illustrator CS5.1 have gone missing..
So I opened up Illustator this morning, and had none of the workspace tools, or UI elements im used to, only the canvas. I assumed they were hidden, so pressed tab, but that did nothing either. I looked though the menu items, and where the settings f
-
I just got the iPhone 5S. I am able to RECEIVE air drops from people, but I can't send anything via Air Drop. I doesn't seem to be communicating with others. I have Air Drop to communicate with my contacts, but it isn't working. Help!
-
Creating java IDE in java ( 5 duke)
http://forum.java.sun.com/thread.jsp?forum=4&thread=320340
-
When I toggle the info button in video mode the electronic level on my Canon 60D is not showing up
I can get it to show up in camera mode but not video. Is there something I need to check on the menu in video mode or??? Thanks!