How to configure sapgui in mac 10.3.9 ?

Hello all ,
I am trying to configure sapgui for java 7.00 rev 5 on my mac os x 10.3.9.
plz let me know how to write configuration file?
I am new in SAP.
Thanks.

Hello,
do you have an account for service.sap.com?
SAP GUI for Java 6.30 and 6.40 are no longer available because their support ended long time go.
Please upgrade to Mac OS X 10.4 (or 10.5 in a few weeks) to run SAP GUI for Java.
Best regards
Rolf-Martin

Similar Messages

Configure SAPGUI in Mac

I need to configure the sapgui in my mac laptop. Please describe the steps or any good document for the configuration.
Thanks

Hi. Good if you ask this question in SAPGUI forum For example read this links
/people/thomas.bentzen2/blog/2007/10/29/using-sap-gui-for-java-on-mac-for-development
http://web.mit.edu/sapr3/sw_dist/macstruct-macosx.html
http://mac.unimaas.nl/sap/
Also if you install SAPGUI in your MAC you have help in this sapgui, please read it. In this help i'm find all configuration what i need, and i'm think you can find to. Regards.

How to configure mail on mac mini server?

I have a new Mac Mini Server ver 2.0.23 I have web access and can see my server from the web going to my site but the stopping block is email services.
I have one ip for www and one for mail.mydomain.com and I have all of the firewall ports open (I think on my router 22, 110, 143). Please advice what the poper settings are and how via the web I am to access the email.
Thank you in advance for your consideration.
Jeff

You will get better results on server questions in the OS X Server forum.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

How to configure Team explorer 2010 command-line tool in Mac x os. configure shell or system path to include the folder to which (TF client) unzipped archive available.

How to configure Team explorer 2010 command-line tool in Mac x os.
Hot to configure shell or system path to include the folder to which (TF client) unzipped archive available. I am new to Mac X OS. Please help.

Dmitry,
Thanks for the great writeup!
I think I've got my universal instant client libraries built correctly.
I too am using MacBook Pro but I'm getting stuck at building the 32 bit oci8.so
First problem is my pecl download (ver 1.4.1) did not contain a "configure" file so ./configure failed.
I used configure from /sw/....... to try to continue.
Second problem. Using existing configure from /sw/.... I used an appropriate variation of your example command
(./configure --with-oci8=instantclient,/usr/local/oracle/instantclient_10_2 && make).
Things look like everything ran OK but The output does NOT include an oci8.so file
So I guess my question is: Which "configure" should I be using? And if it is not the one on the system under /sw/...
where would I get it since it doesn't come in the pecl download?

How to configure Kerberos SSO on Mac 10.6.8? Kindly share the documents if available

How to configure Kerberos SSO on Mac OS X server 10.6.8? Kindly share the documents if available

The following document from Apple covers that I believe:
http://www.marcomc.com/wp-content/uploads/2010/05/Mac-OS-X-Directory-Services-v1 0.6.pdf

How to configure PEAP/EAP-GTC on Mac OS X v10.7 Lion

I want to connect my MacBook Pro to our company WLAN using PEAP/EAP-GTC, but I dont know how to configure it. Can anybody do me a favour? Thanks in advance.

bdc9898 wrote:
I am trying to open a jar file that I could open on Snow Lepard but I cannot open it on Lion because there is no Jar Launcher, what should I do?
Presumably what you think you mean by "JAR Launcher" is a Java runtime.
Open a terminal.
Type "java -version"
If you get an answer, what is that answer? If you get asked for permission to install Java, do so.

I just bought an airport express and I am in the process of configuring but my mac does not detect any airport devise. internet is working wirelessly and the airport is plugged next to the mac. any clue how can I fix this?

I just bought an airport express but when trying to configure it my mac is not capable of detecting the devise. The airport is plugged right next to the modem and the wireless internet is running perfectly. does any one experience this before?

You don't mention what function you want the AirPort Express to accomplish.
If you are trying to configure it to "join" your existing wireless network, you need to know the exact type of security that your wireless network is using fo you can use that same information to provide the correct settings to the AirPort Express.
You may be getting a message that the settings have been stored successfully, but unfortunately the settings that you have provided to the Express are likely the wrong settings.
The only way that you really know if the settings that you entered were correct is if you get a green light 20-30 seconds after you click Update. If you don't get a green light on the Express, the settings that you provided were not the correct settings.
When you click Update, the Express will "disappear". This is normal. Up until the time that you click update, AirPort Utility is communicating to the Express on a wireless network with a name like Apple Network xxxxxxx. As soon as you click Update, the Express switches (or tries to switch) to another network, so of course it will disappear from the AirPort Utility window.
As soon as you click Update, close AirPort Utility. There is no reason to keep watching a window when the Express will never appear.

Downloading and Installing SAPGUI for Mac OSX

First of all I want to say, that this site has the most un-intuitive interface and complicated navigation system I have ever encountered. Was it so difficult to create an easy to access download area for all the GUI's to be accessed and downloaded along with detailed instructions on how to install them?
Sigh.
That being said, I would like some help downloading the SAPGUI for Mac. I know its the java, which can be installed Platform independent. When I go to the download site, and I get to the basket portion it doesnt let me download it. It asks me for my credentials (the same ones I had to use to post in here) and then it knocks out my connection and doesnt let me download.
Secondly I would like also the steps I need to do to install the .jar file on a Mac running 10.6.8. I found a .jar file elsewhere but it runs with errors and doesnt let me get to the familiar interface for configuring SAP.
When I run the .jar file on the mac I get the following error:
Java Plug-in 1.6.0_26
Using JRE version 1.6.0_26-b03 Java HotSpot(TM) Client VM
User home directory = C:\Users\palaugi
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
java.lang.reflect.InvocationTargetException
     at com.sun.deploy.util.DeployAWTUtil.invokeAndWait(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.runOnEDT(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.security.AccessControlException: access denied (java.util.PropertyPermission com.sap.platin.productType read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at com.sap.platin.micro.Version.guessVersionType(Version.java:244)
     at com.sap.platin.GuiAppletBase2.findProductType(GuiAppletBase2.java:336)
     at com.sap.platin.GuiApplet2.getProductType(GuiApplet2.java:18)
     at com.sap.platin.GuiAppletBase2.<init>(GuiAppletBase2.java:54)
     at com.sap.platin.GuiApplet2.<init>(GuiApplet2.java:14)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$12.run(Unknown Source)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$1.run(Unknown Source)
     at java.awt.EventQueue$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Exception: java.lang.reflect.InvocationTargetException
I am not a SAP expert, and no one in my company knows how to work the technical side of SAP on this platform, so I am trying to install and configure this for them so they are able to work.
Thanks!

Hello,
doing a search for "SAPGUI for Java" with your favorite search engine should include the site SAP GUI Family in the top ten of the result list.
This site includes links to navigate directly to the [downloads|SAP GUI Family#section31] of both SAP GUI for Windows and SAP GUI for Java.
On the [same page|SAP GUI Family#section16], there is a [link|SAP GUI Family?rid=/library/uuid/f0dcf725-6b0e-2d10-da9a-96eb3474bdd3] to the online version of the manual which is included with SAP GUI for Java.
Your problem downloading the installer might be related to permissions, please refer to [note 1037574|https://service.sap.com/sap/support/notes/1037574] .
Regarding your problem running SAP GUI for Java
I do not understand "When I run the .jar file". From the stack of the Java console, it looks like your are trying to start it in the browser and the version on the web server and the one installed on your Mac do not match (see "Incompatible Certificates" in the known issues section of the manual coming with SAP GUI for Java).
Once you have downloaded a current SAP GUI for Java version and still have issues using it, please provide more information about your scenario.
Best regards
Rolf-Martin

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

How can I find my Mac book pro it got stolen

How can I track my Mac book pro

Look for it.
Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

How to perform a classic Mac OS search in Tiger

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
In an this post I will describe how to perform a classic Mac OS search and give example results. You may perform the search with or without the spotlight database. This search falls under the smart folder implementation introduced with Tiger. I have done all my testing with Mac OS 10.4.11. I assume this will work with any version of Tiger or Leopard.
The results will be slightly different with a spotlight database on the partition and without a database on the partition. With a database, you will not see Unix hidden files. You may be able to use all of the spotlight special find features. I did not test much with the spotlight special fields. Without a database, using the special features nulls out the search and the "Search for" field seems to give the same result as using the name field.
This search technique was obscured by all the hoopla over spotlight. Authors of Tiger books avoided mentioning the Classic search interface. When I looked in Leopard books I noticed some authors put back information on the Classic search interface.
For testing I created these files
For testing I created a test "z-find" folder on my Macintosh-HD, containing files and folders with various attributes, then copied it over to my Spotless flash drive. This means both searches searched for the same file names.
I put these files on my Macintosh-HD and Spotless partitions.
Here is the list of files:
!http://farm3.static.flickr.com/2122/3746333451_36daa677f8.jpg?v=0!
Here is the list of files again:
.bash-backup-copy-initial-dot-copy.html
.bash-copy-initial-dot/
    bash-backup-inside-bash.html
    ping_command_as_Give.html
bash-backup-copy-invisible-attr.html
bash-backup.html
bash-batChmod.html
bash-battery__yellow__4k.html
bash-copy/
    bash-backup-inside-bash-copy.html
    ping_command-bash-copy.html
bash-copy-invisible-attr/
    ping_command_as_Give.html
bash-folder__green/
    ping_command_as_Give.html
Perform the Classic Mac OS search with a Spotlight database.
{color:red}By Classic Mac OS search I mean a search on the filename and the results shown in list format.{color} How do you get to this interface?
*Click on the Desktop to access the Finder.*
*Click on File then click on Find. (Command-F)*
Pick what folder you wished to search. With Tiger you can click on Others... to select a folder. Click on the plus sign to select the folder you wish to search. Be sure the selected folder in the list is the only one checked. In the first example I picked: /Users/mac/Desktop/iMac/z-find/
{color:purple}The "Search for" field on the first line is used for spotlight. Avoid using this box.{color}
*Click on the double arrow to the right of the first option (Kind). Go down to the name field.*
*Change the 2nd pop down field to Contains.*
*You can now search for the contents of a filename.* I searched for name contains: bash-
To see the Classic display format, click on the three line icon which is located on the upper left of the window (list view). There is a small refresh icon on the lower right of the window.
!http://farm4.static.flickr.com/3485/3240587496_741476de7b.jpg?v=0!
This is the result of the search with a Spotlight database:
bash-backup-copy-invisible-attr.html
bash-backup-inside-bash-copy.html
bash-backup-inside-bash.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-copy-invisible-attr    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
You can create a smart folder to take you directly to the search panel. Just click on the Save icon to the right of the window near the top. For readers of books, you should look under smart folders.
!http://farm4.static.flickr.com/3498/3239759755_d5ebbefe05.jpg?v=0!
There are some downsides. Initially, the search will find both visible and invisible Mac OS files. However, the search seems to get confused between visible and invisible files when you select the visibility option. It seems to get the visible correct when you use visible but when you add invisible things get confused. Sometimes it will find invisible files and sometimes it won't. I used both the Unix invisible files and the Mac OS X visiblity attribute.
In putting the same search in the upper right-hand-corner spotlight search and in the Search for field, I did not get the same results. The spotlight search returned a 182 items while the with Search for field returned 179 items. The Search for field seemed to miss items in the mail boxes. With the Search for search you could display spotlight results in the classic format.
I did a successful search on my fat32 flash drive.
Perform the Classic Mac OS search without the spotlight database.
If you turn off spotlight indexing on a volume and delete the spotlight index, then Mac OS Tiger reverts to the prior Mac OS search facility. In the preferences for spotlight, you let searching continued on the partition.
Here is what I did:
I installed the spotless application.
http://www.fixamac.net/software/spot/
I use spotless to configure spotlight. Click on disabled indexing then click on delete index files.
!http://farm4.static.flickr.com/3527/3239751839_c760c46628.jpg?v=0!
Spotless creates the .Spotlight-V100 directory with the _IndexPolicy.plist and _rules.plist to prevent indexing on the partition.
I performed the search for files containing "bash-" in the name field.
!http://farm4.static.flickr.com/3430/3240587902_171d8d46c3.jpg?v=0!
This is the result of the search without the Spotlight databases:
bash-backup-inside-bash-copy.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
Limitations:
Does not search in Unix hidden folders. That is folders beginning with a period (.) .
Sometimes will find files beginning with a period (.).
Does not find Mac OS invisible files.
Using the special features nulls out the search.
The Search for field seems to give the same result as using the name field.
Related tips:
• More hints by Baltwo
http://www.macosxhints.com/article.php?story=20050501162147222
•Spotlight in Leopard has been enhanced. See these articles for details:
See http://www.pinkmutant.com/articles/Leopard/leospot.html and my mod to Finder's Find at http://discussions.apple.com/message.jspa?messageID=6725932 for what you can change so you can find stuff excluded by the default structure.
• FindAnyFile
"Contrary to Spotlight, it does not use a database but instead uses the file system driver's fast search operations."
http://apps.tempel.org/FindAnyFile/index.html
• Use the terminal find command to list files from multiple directories.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -exec ls -dF {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy/
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr/
/Users/mac/Desktop/iMac/z-find/bash-folder__green/
mac $
• You can use the Terminal to search the contents of a file.
You need to combine the find command with the grep command. I am searching for the word pdisk where file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find". The symbols {} \; are needed after the word to search. See:
man find
man grep
for cryptic details.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -type f -exec grep -bil 'pdisk' {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
• findfile
"Here’s a simple command-line tool which uses FSCatalogSearch to search for files by name.
usage: findfile -r <volume> <name> "
Here is where to find: findfile.
http://cocoacafe.wordpress.com/2007/06/17/fscatalogsearch/
I am searching file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find".
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ ~/findfile -r /Volumes/Macintosh-HD/ "bash-" |\
additional input: grep '^/Users/mac/Desktop/iMac/z-find/'
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr
/Users/mac/Desktop/iMac/z-find/bash-folder__green
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
Robert
This is the 1st version of this tip. It was submitted on July 31,2009 by rccharles.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
In an this post I will describe how to perform a classic Mac OS search and give example results. You may perform the search with or without the spotlight database. This search falls under the smart folder implementation introduced with Tiger. I have done all my testing with Mac OS 10.4.11. I assume this will work with any version of Tiger or Leopard.
The results will be slightly different with a spotlight database on the partition and without a database on the partition. With a database, you will not see Unix hidden files. You may be able to use all of the spotlight special find features. I did not test much with the spotlight special fields. Without a database, using the special features nulls out the search and the "Search for" field seems to give the same result as using the name field.
This search technique was obscured by all the hoopla over spotlight. Authors of Tiger books avoided mentioning the Classic search interface. When I looked in Leopard books I noticed some authors put back information on the Classic search interface.
For testing I created these files
For testing I created a test "z-find" folder on my Macintosh-HD, containing files and folders with various attributes, then copied it over to my Spotless flash drive. This means both searches searched for the same file names.
I put these files on my Macintosh-HD and Spotless partitions.
Here is the list of files:
!http://farm3.static.flickr.com/2122/3746333451_36daa677f8.jpg?v=0!
Here is the list of files again:
.bash-backup-copy-initial-dot-copy.html
.bash-copy-initial-dot/
    bash-backup-inside-bash.html
    ping_command_as_Give.html
bash-backup-copy-invisible-attr.html
bash-backup.html
bash-batChmod.html
bash-battery__yellow__4k.html
bash-copy/
    bash-backup-inside-bash-copy.html
    ping_command-bash-copy.html
bash-copy-invisible-attr/
    ping_command_as_Give.html
bash-folder__green/
    ping_command_as_Give.html
Perform the Classic Mac OS search with a Spotlight database.
{color:red}By Classic Mac OS search I mean a search on the filename and the results shown in list format.{color} How do you get to this interface?
*Click on the Desktop to access the Finder.*
*Click on File then click on Find. (Command-F)*
Pick what folder you wished to search. With Tiger you can click on Others... to select a folder. Click on the plus sign to select the folder you wish to search. Be sure the selected folder in the list is the only one checked. In the first example I picked: /Users/mac/Desktop/iMac/z-find/
{color:purple}The "Search for" field on the first line is used for spotlight. Avoid using this box.{color}
*Click on the double arrow to the right of the first option (Kind). Go down to the name field.*
*Change the 2nd pop down field to Contains.*
*You can now search for the contents of a filename.* I searched for name contains: bash-
To see the Classic display format, click on the three line icon which is located on the upper left of the window (list view). There is a small refresh icon on the lower right of the window.
!http://farm4.static.flickr.com/3485/3240587496_741476de7b.jpg?v=0!
This is the result of the search with a Spotlight database:
bash-backup-copy-invisible-attr.html
bash-backup-inside-bash-copy.html
bash-backup-inside-bash.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-copy-invisible-attr    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
You can create a smart folder to take you directly to the search panel. Just click on the Save icon to the right of the window near the top. For readers of books, you should look under smart folders.
!http://farm4.static.flickr.com/3498/3239759755_d5ebbefe05.jpg?v=0!
There are some downsides. Initially, the search will find both visible and invisible Mac OS files. However, the search seems to get confused between visible and invisible files when you select the visibility option. It seems to get the visible correct when you use visible but when you add invisible things get confused. Sometimes it will find invisible files and sometimes it won't. I used both the Unix invisible files and the Mac OS X visiblity attribute.
In putting the same search in the upper right-hand-corner spotlight search and in the Search for field, I did not get the same results. The spotlight search returned a 182 items while the with Search for field returned 179 items. The Search for field seemed to miss items in the mail boxes. With the Search for search you could display spotlight results in the classic format.
I did a successful search on my fat32 flash drive.
Perform the Classic Mac OS search without the spotlight database.
If you turn off spotlight indexing on a volume and delete the spotlight index, then Mac OS Tiger reverts to the prior Mac OS search facility. In the preferences for spotlight, you let searching continued on the partition.
Here is what I did:
I installed the spotless application.
http://www.fixamac.net/software/spot/
I use spotless to configure spotlight. Click on disabled indexing then click on delete index files.
!http://farm4.static.flickr.com/3527/3239751839_c760c46628.jpg?v=0!
Spotless creates the .Spotlight-V100 directory with the _IndexPolicy.plist and _rules.plist to prevent indexing on the partition.
I performed the search for files containing "bash-" in the name field.
!http://farm4.static.flickr.com/3430/3240587902_171d8d46c3.jpg?v=0!
This is the result of the search without the Spotlight databases:
bash-backup-inside-bash-copy.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
Limitations:
Does not search in Unix hidden folders. That is folders beginning with a period (.) .
Sometimes will find files beginning with a period (.).
Does not find Mac OS invisible files.
Using the special features nulls out the search.
The Search for field seems to give the same result as using the name field.
Related tips:
• More hints by Baltwo
http://www.macosxhints.com/article.php?story=20050501162147222
•Spotlight in Leopard has been enhanced. See these articles for details:
See http://www.pinkmutant.com/articles/Leopard/leospot.html and my mod to Finder's Find at http://discussions.apple.com/message.jspa?messageID=6725932 for what you can change so you can find stuff excluded by the default structure.
• FindAnyFile
"Contrary to Spotlight, it does not use a database but instead uses the file system driver's fast search operations."
http://apps.tempel.org/FindAnyFile/index.html
• Use the terminal find command to list files from multiple directories.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -exec ls -dF {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy/
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr/
/Users/mac/Desktop/iMac/z-find/bash-folder__green/
mac $
• You can use the Terminal to search the contents of a file.
You need to combine the find command with the grep command. I am searching for the word pdisk where file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find". The symbols {} \; are needed after the word to search. See:
man find
man grep
for cryptic details.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -type f -exec grep -bil 'pdisk' {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
• findfile
"Here’s a simple command-line tool which uses FSCatalogSearch to search for files by name.
usage: findfile -r <volume> <name> "
Here is where to find: findfile.
http://cocoacafe.wordpress.com/2007/06/17/fscatalogsearch/
I am searching file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find".
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ ~/findfile -r /Volumes/Macintosh-HD/ "bash-" |\
additional input: grep '^/Users/mac/Desktop/iMac/z-find/'
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr
/Users/mac/Desktop/iMac/z-find/bash-folder__green
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
Robert
This is the 1st version of this tip. It was submitted on July 31,2009 by rccharles.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How to configure sapgui in mac 10.3.9 ?

Similar Messages

Maybe you are looking for