How to configure SC dependencies in SLD (while creating DCs)

Hi
I have gone through some pdf but still i am not clear how and why DCs are used.... what is advantages of using DCs?
I am trying to work on DCs(Development Components)... i have gone through one PDFs... In that first they have created product and software component... and they define SC dependencies after that they define a track....
after finishing this configuration they have created the development components(DCs) in NWDS....
Is it neccessary to created product and software component and all... if its yes please tell me why?.....
I have created Products and Software components but i dont know how to create Dependencies and how to defice track....
So please give me a clear picture on DCs......
please help me
Thanks & Regards
Ravi Shankar B

Hi Ravi,
If you want to create DC there is no need to create software component and product , DC itself is a indepenedent container. DC is used to share different DC's
example:
dc1 -> go to your componect -> click add to public part (by addition your dc to public part it becomes available)
dc2-> dcmetadata -> used dc's ->right click -> add used dc's
in dc2 you will get all reference to all the compoenent for which u have done public part
Hope it is becomes clear to you now.
Regards,
Hemant

Similar Messages

How to configure server process in sld add server in configtool

hi friends
i have added the server process in configtool after restaring the server sld server is stoped it not staring and it gives a messge that configur server process in sld adiminstration
can any one help how to configure the server in sld ?
and what are ther prerequesties that i need to take when i am adding sever proces in configtool and how many server proces i can add in the java engin
after incersing server proces how to configur in sld ?
regards
raja

hi janu
thanks for responding
i know how to configur was abap and was java in sld. i have issue when i add 2 server process in configtool , sld server is stoped there it is giveing maintal profile in the sld administration. i would like to know what need to me manintatinge in sld this is my issue .
regards
raja

How to configure wokflow for MRP generated & manually created PR

Dear Gurus,
I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
I have some questions regarding workflow
1) How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
2) Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
Looking forward to your reply,
Thanks in advance,
Best regards
Tushar
SAP MM Consultant

Dear Mike,
Thanks for your reply, & sorry for not responding on time.
Here are my constraints:
1) Not a single component of HR module will be implemented.(Project management decision:-()
2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
"An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
Program=SAPLSWF3
Include=LSWF3U05
Row=22
Module name=SWF_WFP_REPOSITORY_CONTENT_GET
The same dump is coming while accessing SWF_WFPVW table from SE16.
Request to Mike & all of you, help me in this regard.
Thanks in Advance,
Regards,
Tushar

How to add more than one datafile while creating tablespace

how to add more than one datafile while creating tablespace. I know by using alter command i can add datafile but i want while creating tablespace

Hi Dadivela,
how to add more than one datafile while creating tablespace.Here is the syntax:
!http://www.dba-oracle.com/images/create_tablespace.jpg!
I do it like this:
create tablespace myts
datafile
*'/u01/app/oracle/db1.dbf' size 100m,*
*'/u02/app/oracle/db2.dbf' size 200m;*
Here are my complete notes:
http://www.dba-oracle.com/t_tablespace_create_alter.htm
Hope this answers your question . . .
Donald K. Burleosn
Oracle Press author

How to configure apache to avoid risks while hosting your domain

Hi all
I am trying to host my personal site on my machine, and after configuring the personal web i am able to see the apache page when i go to my ip address (the real one, not the one from my router).
Now, i have little experience with apache on pc, and i remember that there was a bunch of files to set up authentication, users allowed to log in into your site, restrictions to avoid that some guy will sneak on the machine and get out of the web folder....etc.
Can someone please point me to the right info about how to configure apache on Leopard to avoid unwanted risks while simply hosting a site and a wiki?
Thanks!

Leopard client only has a User Interface to turn web sharing on or off. If you want to modify apache you have to do via the command line in the terminal client.
Out of the box Leopard is configured so that only your sites folder is accessible. and the systemwide webfolder located at /Library/WebServer/Documents
so if you want your sites folder to be accessible and not the main webserver folder can rename that folder to Documents.bak for example.

How to Configure Business System in SLD (SAP-XI).

Hi all,
I am new to XI. I want to know the detail scenario of configuring Business system in SLD(System Landscape Directory) in SAP-XI.
Can , anyone help me on this...

hi suresh,
gothrogh this below liks ..........
http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/7b/d4653fd1d3b81ae10000000a114084/content.htm
http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+(SLD)
regards,
kesava

How to configure AS400 System in SLD

Hi,
Am in need to configure AS400 system into SLD. Driver and connection are done. Am in need to add the system into SLD.
do we need to add AS400 DB2 system as the third party system?

Prem,
It depends upon your client standards and SLD naming conventions. If there are mulitiple interfaces to this system, then I would create a 3rd party business system in SLD. After creating you need to assign the corresponding target system, so that when you transport it will take care. Once created you need to import it into your configuration and do your interfaces configuration accordingly.
Regards,
---Satish

How to manual maintain TAX condition value while creating sales order

Hi
I am creating one Tax condition suppose JLST without access sequence .
while creating sales order I am manually maintain the % value of TAX. suppose it is 1%
then I see It show some value in TAX .
save that sales order & creating delivery document for that but when I create Invoice its show error.
" Tax code in procedure CMTAXP is invalid ".
I know the configuration only for Tax condition with vk11 condition record .
BUT now I want to maintain TAX condition at the time of creating sales order.
so I remove the access sequence of that condition .
but It shows tax code error while billing.
My main question is that If i maintain condition record while creating sales order then how i can assign Tax code .
Can it is possible ?
if yes then How?
please help me.
thank you

Hi,
The "straight-forward" answer for Tax Code creation is contact the FI consultant. He shall help you, by creating Tax codes.
I have tested, with creating a tax cond type (copy of MWST) & manually entering values. I can create Sorder, Dlv and Bill but I cannot create an Accounting document. That is because of every line (amount) a Tax code is necessary.
I THINK, you can NOT have manually filled tax codes; access sequence is needed to get the tax value (%) and the Tax code from the condition record.
There is lot of material on the web to understand Tax classification, code etc. etc. See a useful link below -
http://www.sapgeek.net/2010/04/sd-determines-tax-code/
In short Tax code is a must and take the help of your FI consultant for the configuration of the same.
BTW - Tax code is already made created for MWST, therefore I suggested that you can use MWST. Furthermore, you can change the values corresponding to Tax codes in FTXP.
But if you are a beginner in these things, better take help.

How to avoid XVBPA line item values while creating sales order

Hi Friends
I am creating Sales order using function module IDOC_INPUT_ORDERS, for that I am passing partner details through segment E1EDKA1.If I pass the same partner details(Partner number, name1,name4,city,postel code) which is same like customer master,
I can able to book the order and entries are coming only one time in VBPA table(Header Item level).But if I change any value for the particular partner in the Input(For example Name4, there is no value in customer master but I added through program).Now its creating an order but its showing the entered partner informations in header level.When I checked the same in line item level, its not picking the values from header, its picking the values from customer master for that particular partner.
So this line item also coming in VBPA table, because its different from header data.
Anyone guide me, how to avoid this problem while booking order through program.
Thanks
Gowrishankar

I am updating Ship-To-Party value in segment E1EDKA1 and calling IDOC_INPUT_ORDERS function module to create the sales order.
In this case for the particular partner there is no NAME4 value in KNA1, I am passing some value through this segment E1EDKA1.
So its creating an order with this new addresses , so its generating new ADRNR in VBPA header level.Thats fine.But the same time
its not copying the same value from header to line item.
In Line item level again its picking the address details from KNA1 for the particular partner number.So its showing Blank value in NAME4 field of line items.Its creating and spllitting issue, while creating delivery.
Thanks
Gowrishankar

How to default current date in MIGO while creating a return delivery

HI,
While creating the return delivery using 122 mov type, system is defaulting the document date of the original doc which is being referred as the document date of the return delivery document.
How we can make the system to populate current date as document date automatically, even though we are referring a material doc to create the return delivery. Pl suggest.
Regards,
Robin

HI,
My question is,
How we can make the system to populate current date as document date automatically, even though we are referring a material doc to create the return delivery. Pl suggest.
Regards,
Robin

How to find the Acoount Group used while creating the customer master data.

Hi,
I am in xd03 mode displaying the customer master data. I want to know the ACCOUNT GROUP which was used while create this customer. How can i find it? Can any one tell me the process to find the account group?
Thanks in advance.

Enter the customer number in XD03 and click enter. Once the screen displays the customer name go to dropdown extras--> Administrative Data. This will give you the account group and the creation date of the customer. The same is stored in KNA1- KTOKD.
Thanks
Indranil

How to change the status of material while creating sales order via BDC

Hai.
In BDC while creating sales order( va01 posting ) it is stucking up in middle saying material is new. I.e Sales order (va01) is not getting created because of material status is new . I want to create sales order (va01) even material status is new.
pls give me out the solution. Points will be rewarded.
thanks & regards,
sami.

Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore

How to hide componant row of BOM while creating sales order OR AR Invoice

Dear expert
my client wants to create Sales order with Sales BOM, but they do not want to see componant product while create sales order or AR invoice they want to see only parent items.
Please help me asap

Hi,
check below link
Avoid printing child items of Sales BOM in AR Invoice
Regards
Deepak Tyagi

How to set standard quantity for po while creating idoc

hi..
i have a requirement to create an outbound idoc for PO in which i need to set a standard quantity as '1000'... plz tell me where to set the quantity,so that the PO quantity is 1000 by default while creating PO...
Plz help me asap

Hello,
Your requirement is not clear, why you want to change PO item quantity? anyway, If you want to post an IDOc with changing the PO item quantity, go to Customer exit EXIT_SAPLEINM_002 in IDOC_OUTPUT_ORDERS and change the quantity(MENGE) for each segment (E1EDP01) and modify the IDoc data (INT_EDIDD).
Remember to create a Poject using CMOD and add this customer exit and activate, otherwise your code doesn't get triggered.
Thanks
RK

How to configure PI for Central SLD ?

HI Guys,
we have installed PI 7.0 NW2004s SR2 and now we need to configure the syatem as Central SLD. can any body breifly explain how to do this ?
any help would be really appreciated
Thanks,
srini

Hi srinivas...
As for my understanding ...you need to do post installation to configure your PI server,,,,
Goto http://<Host>:<port>/nwa
There you find the administration --> Click on DEPLOYandCHANGE Tab
righthand side corner you find the Templates...select the PI...
click on Execute template ....
finally click on install button...It will perform all the necessary action to configure PI server...
I hope this might help you..
regards,
vasanth

How to configure SC dependencies in SLD (while creating DCs)

Similar Messages

Maybe you are looking for