How to configure selective automatic reply (out of office) using Exchange2010
Hi, I want to configure automatic reply to eveyone except for some specific mail address - this need need to be configured through the OWA interface and not through the Outlook 2010 client.
Automatic reply (out of office) is limited to all incoming messages (no way to specify exception list of mail) and rules cannot be configured without the outlook client running....
Any ideas?
Hi,
Based on my understanding, you want to configure OOF excluding some specific users, this means that automatic reply shouldn't be sent to these specific users. I'm afraid it's hard to achieve this. The only available way is to emulate this
by using a rule in Outlook.
Best regards,
Belinda
Belinda Ma
TechNet Community Support
Similar Messages
-
How to configure an automatic vendor assignment for a purchase requisition
hi guys,
how to configure an automatic vendor assignment for a purchase requisition in sap
Thanks in advancehi Swathi,
Check these Links out
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee11e655c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5e/372e3b7532394ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b912a43ad11d189410000e829fbbd/frameset.htm
Regards,
Santosh -
How do I set up an Out of Office Reply while I am on vacation?
How do I set up an Out of Office Reply to incoming emails while I am on vacation?
Couple of links,
Out of Office Auto-reply
How to Set Up an Autoresponder in Mac OS X Mail -
HT1349 How do I set-up an out-of-office auto reply if I'm still using mobileme?
How do I set-up an out-of-office auto reply if I'm still using mobileme?
Couple of links,
Out of Office Auto-reply
How to Set Up an Autoresponder in Mac OS X Mail -
How do i set up an "out of office" message on Mail?
how do i set up an "out of office" message on Mail?
There is a ay to do it in Mail, using rules, but that's not a very good idea. Homemade rules can cause things like infinite mail loops (where two accounts auto-reply to each others until one or both mailboxes fill up and cannot receive any more messages). See what your mail server offers in this regard. Auto-replies on the server are typically far more reliable and less error-prone.
-
Is it possible to use a non-null sender in auto-reply / out of office messages?
I am using a smarthost that blocks null senders by default. They have indicated that they can provide an override for our server to allow null senders, but the e-mail from null senders will go out a "high risk" IP that is likely to get
blacklisted because e-mail from null senders is triggering more blacklisting as of late. I would prefer to make Exchange populate the sender field on the outbound auto-reply / out of office messages. Is this possible?Hi PRDIT,
Based on my knowledge, it is impossible to achieve this goal by normal method directly.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
How to Attach permit automatically to an work order using abap
how to Attach permit automatically to an work order using abap
Moderator message : Not enough re-search before posting, show the work you have already done, thread locked.
Edited by: Vinod Kumar on Jan 30, 2012 2:16 PMAt least make sure that you have a default method 'browse' in your class. I mean that make a method for "displaying" or "browsing" or whatever you want to happen when you click the object, and make it default. OR actually if I remember correctly there is a default method existing already, but put your code to there.
Also try this:
-Create a container element of type 'sales order' into your task
-Bind the sales order object from workflow to the the task
Regards,
Karri -
How to make selection parameter gray out, not changeble mode
Hi Experts,
Selection screen having parameters, I am putting default values in that parametrs.
How to make this parameter gray out, not changeable mode.
Thanks in advance
mahahe.
See comments below
Edited by: Rob Burbank on Jul 1, 2009 12:43 PMHi,
For the parameters required, while declaring them use the MODIF ID, lets say you have choosen the modif id as SC1.
i.e. parametes: p_mat type matnr DEFAULT '100' MODIF ID SC1.
Then in the initialization event, code as below.
LOOP AT SCREEN.
IF screen-group1 = 'SC1'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
It will work.
Regards,
Nangunoori. -
How can I set up an out of office message?
I use Macmail for my mac.com account and also to receive my business emails through another server. I have tried to use rules to respond with an "out of office" message but it has not gone well. The system responded to year old emails and flooded our email. I have read on some support sites about setting up through the server but I do not understand. I need a response that is not overly technical as I do not understand what I am reading if tech lingo is used...sorry but I try!
PeytonYou might want to check with your email service provider. They often have this option built into their service. For example, I have an email account with Verizon. They have a "vacation" setting that when turned on will send an automatic reply for you. Your incoming email is otherwise delivered normally.
Dan -
How can I select columns from a table EMP, using Select statement?.
Hi Friends,
How can I select columns from a table EMP?.
I want to select columns of EMP table, using select statement.
Please reply me urgently.
ShahzadSomething like this:
scott@DBA> select empno,ename,job from emp;
EMPNO ENAME JOB
7369 SMITH CLERK
7499 ALLEN SALESMAN
7521 WARD SALESMAN
7566 JONES MANAGER
7654 MARTIN SALESMAN
7698 BLAKE MANAGER
7782 CLARK MANAGER
7788 SCOTT ANALYST
7839 KING PRESIDENT
7844 TURNER SALESMAN
7876 ADAMS CLERK
7900 JAMES CLERK
7902 FORD ANALYST
7934 MILLER CLERK
14 rows selected.Check the documentation:
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#sthref9697
Message was edited by:
Delfino Nunez -
How to Auto Select some RadioButton on page load using ADF/JSF
Hi,
I am learning ADF and need some help. I have multiple radio buttons and couple of text boxes on my page. How can I make some radio button be selected based on some value from a database table and also populate the text boxes with the corrosponding value when a page loads. Any tips on how it can be done using ADF. Any sample tutorial will be helpful.
ThanksHi,
when you e.g. use ADF BC then the radio button should be selected automatically based on the value of the attribute. If the row is new then you can have a default value specified in the ADF BC ViewObject attribute.
However, if you just dragged the radio button and checkboxes onto the page - not using any ADF binding - then you will have to create a managed bean with a field variable (incl. setter/getter methods) to link the radio button's value property to it using Expression Language
Frank -
How to configure internet domain name for P6 website using weblogic
After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?
HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri -
How to get selected row values in a table using check box
Hi ADF Experts,
JDEV Version 11.1.1.7.0
My requirement is getting the selected row valuesof a af:table using a checkbox(multi select).
Thanks,
AnimeshHi,
add a transient attribute to the POJO entity and update this through a check box. The ensure you have autosubmit=true set on the check box. In a value change listener set or remove the row's checbox attribute value
Frank -
How to configure selection variant on KO8G
Hi Gurus,
I need to do collective settlement on my work orders. and the requirement is to settle it through tcode KO8G but the problem is they settle per plant. how can i configure it in such a way that the settlement is on a per plant basis?
Thank you.Hi,
Create selection Varient from KO8G itself by clicking on create icon,
Or
by t-code OKOV
Select option as per your requirement for selection.
Kapil -
How to configure selection screen in report
Hi all,
could anyone help me in configuring the selection screen in the report.
Advance Thanks
Regards
GuhapriyanHere is some basic code to generate a selection screen.
tables: afko.
selection-screen begin of block b1 with frame title text-001 .
select-options: s_gltrp for afko-gltrp.
parameters: p_gltrp type afko-gltrp.
selection-screen begin of line.
selection-screen comment (25) text-005.
selection-screen position 33.
parameters: p_pln as checkbox default ' '.
selection-screen end of line.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-004 .
selection-screen begin of line.
selection-screen comment (20) text-002.
selection-screen position 33.
parameters: p_det as checkbox default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment (20) text-003.
selection-screen position 33.
parameters: p_sum as checkbox.
selection-screen end of line.
selection-screen end of block b2.
Regards,
Rich Heilman
Maybe you are looking for
-
SSO b/w portal and webdynpro application customized login??
Hi, I have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller).
-
Problem description: Wondering if I should upgrade to Yosemite from Mac pro 10.6.8 as search engines are not always responding well - Fan comes on with firefox/safari is not always responding on some sites - also concerned about security issues as m
-
How can I create a better Xbox live experience?
Hello, I currently am using an airport extreme to run my wireless home network. I used to have a great Internet connection for Xbox live because my ISP gives me great speed. Now after aquiring many devices (10 to be exact...iPads, iPhones, I touches,
-
Why would my Apple TV suddenly stop recognizing my library. Nothing has changed. How can I test the Apple TV. I have the latest updates.
-
I'm afraid this might be obscure ... But I am trying to get an old Gateway FPD1500 monitor with an MDR20 out to work with my new Macbook Pro, and have bought an adapter for that purpose. It doesn't work--although it tries (it blue-screens for a few s