How to configure Sender File Adapter to pick couples files in order !!
Hi Folks,
I am really looking for one requirement like, Sender file adapter has to pick multiple files by file name based with some time gap? Can we?
I have got one BPM in this, I have tried with Process mode : Name and Date, with wait step on BPM, but no use. The way how PI behaving, if 40 files in file directory, it is picking all files in one shot. Start processing but not in order.
The problem is on Receiver system side. The receiver system is SNC system, if old data receives later than earlier date data; we get data obsolete application error.
Ex: If I receive 25th and 26th files, first I need to process 25th first on PI sends to SNC, I need to give some time gap and pick another file or even PI picks and process 26th file, no problem but I need to give some time gap to send SNC to this 26th date file?
Please how guys, throw me your great ideas
Thanks in advance!!
Regards
San
@ Sandhya
If there are 40 files , can you please specify how many types of files are ther like say first A type shud be picked then B type then C type and so on so forth ?
LIke in my case I had only three types of files file1 and file 2 file 3
and in the directory also only three files will be placed at a time
you need to have some logic to separate the type of files in differnt folders and then process them
@ farooq yes . it will create problem if 40 files are kept at a time .
Regards
Ninad
Similar Messages
-
How to configure sender mail adapter
Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu SinghalHi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin -
How to configure Sender IDOC adapter
Hi could someone pls guide me on the steps that i need to take to configure IDOC sender adapter..
Are the steps for Sender and Receiver IDOC adapter same other than the fact that sender idoc adapter doesn't need a sender communication channel.
Regards,
Ashishhi Goyal,
Just check out this link.
How to Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards
Sachin -
How to configure the file adaptor so as to send an sample XML message.
Hi all ,
I had done the configuration and now i want to test the scenario but i dont now how to do that ?.
how to configure the file adaptor so as to send an sample XML message to the integration server ?.
I am totally new to XI.
please help me out how to do it.
its an urgent.
Thanks,
shujaHi,
I think you should post your question Process Integration (PI) & SOA Middleware.
Regards
Message was edited by:
Shehryar Khan -
How to configure RFC receiver adapter
HI,
I have a Proxy-to-RFC scenario. But I have no knowledge in RFC receiver adapter. Could you please provide me the step-by-step guideline or sample about how to configure RFC receiver adapter.
Thanks in advance.
Best regards, Johnney.Hi,
Refer these links which will help you understand the concept and configure the Scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
The specified item was not found.
Refer this blog for synchronous scenario
RFC Scenario using BPM --Starter Kit
Sender RFC Adapter:
The specified item was not found.
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> file scenario: application stopped
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfctofile&cat=sdn_all
RFC to file
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Send RFC to SAP XI Asynchronous
The specified item was not found.
ABAP Proxies in XI(Client Proxy)
Regards,
Nithiyanandam -
Getting error when configured sender mail adapter
Hi Everyone,
When i tried configuring sender mail adapter am getting these logs in Runtime workbench.
In ID,when i gave ip address in place of URL, am getting this log
"exception caught during processing mail message; java.io.IOException: unexpected password response; read -ERR Logon failure: unknown user name or bad password."
When i gave URL in place of URL, am getting this log
"exception caught during processing mail message; java.net.UnknownHostException:"
why is it giving this log, What correction i have to do to make it work.
Thanks in advance,
SakthiHi,
<i>1.How to stop deleting mails.</i>
When the IMAP4 protocol is used, we get an option "Delete messages when read".You could specify if you need to delete it or not.
<i>2.How to do mapping for an attachment,what additional things i have to do for this.</i>
Could you please elaborate?
<i>3.Is there any option to change the flag of mail once it is read by XI.</i>
You cannot do this from XI. You would need to do it in your email client. In case you are using IMAP4,you could mark the message as read, once XI reads the unread message.
Regards,
Smitha. -
How to Configure Microsoft loopback adapter in windows 2008
Hi all,
I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime.
I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont know about it. so i m not able to proceed
further. it gives osme error about local host. i think its about Microsoft loopback adapter. can anyone have idea abt it.How to
Configure Microsoft loopback adapter in windows 2008?
Can anyone help me ASAP coz i m stucked like anythng.
thanks
CheersHi vinay
Thanks for reply...I m Installing SAP IDES...with DB2
I have upload JCE zip file...after clicking next button i m getting following Errors,
ERROR 2014-10-02 09:52:29
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2014-10-02 09:52:29
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
How i can get rid of it.
Thanks -
How to configure send mail ?
Hi,
How to configure send mail ?
O/S is OEL-5.8 64-bit.
Thanks.Sendmail uses the M4 macro processor to compile the configuration files. There is no GUI, if that is what you are looking for.
The configuration depends on what you want to accomplish and how email needs be routed in your environment.
You can find many tutorials and scenarios in Google: -
How can I send files by FTP with Oracle Portal?
I want to send some file by FTP.
How can I send files by FTP with Oracle Portal?
Any ideas?Enrique,
Are you trying to transfer more content from remote locations to expose as items within a portal page? By itself, the Oracle Portal runs within the context of the database so I'm not sure how FTP at the OS level will help. However, if you're attempting to transfer files from a remote PC to upload within the Portal, here are a couple of suggestions.
Option 1:
A. Create a portal page.
B. Convert a region to Items.
C. When you're challenged to upload a file from the local OS, ensure you've a drive mapped to your remote location and pick the file to upload into the Oracle9iAS Portal.
Option 2:
Alternatively, the Oracle9iAS Portal 9.0.2 supports the WebDAV protocol(Web-based Distributed Authoring and Versioning Protocol) allowing endusers with a WebDAV client to upload content into the Portal seamlessly from their desktop.
Pls. check out:
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_WEBDAV.HTML
Hope that helps!
Thanks,
Sudi Narasimhan
Oracle9iASPortal Partner Management/Development
I want to send some file by FTP.
How can I send files by FTP with Oracle Portal?
Any ideas? -
How can I send files via Bluetook from my Tour to other phones?
How can I send files via Bluetook from my Tour to other phones?
I have even been able to pair to the other device, but I don't see the option to send/copy/move files through Bluetooth.
I can only send my Address book via bluetooth.
Please help!!Hi and Welcome to the Community!
See this KB:
KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones
Substitute, in the KB, the appropriate instructions for your other device in place of the KB section for the receiving device. Be aware that RIM only supports BT file transfer between BBs...with other devices is technically unsupported. But, it usually works, as long as the two devices are paired, trusted to each other, and each have all of the correct BT services enabled for the configuration of the other device.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?
Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.
-
How to configure an jms adapter to use ActiveMQ?
Does anyone have an example of how to configure an jms adapter of oracle esb
for third party JMS provider to use ActiveMQ?
I had done something as follow:
1、add activemq shared-library in $SOA_INSTANCE/config/service.xml
2、config a jms adapter fro third party use paramter:
java.naming.factory.initial org.apache.activemq.jndi.ActiveMQInitialContextFactory
java.naming.provider.url tcp://10.20.30.26:61615
but I got a error:ERRJMS_CONN_FAC_NOT_FOUND.
Caused by: javax.naming.NameNotFoundException: org.apache.activemq.ActiveMQConnectionFactory
at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:225)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at oracle.tip.adapter.jms.JMS.JMSFactory.jndiLookup(JMSFactory.java:237)
at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:138)
... 51 more
what should I do? can someone give me a detail resolvent?I also had done as follows:
1、add activemq shared-library to shared-library named "oracle.esb" in server.xml :
<shared-library name="oracle.esb" version="10.1.3">
<import-shared-library name="apache.activemq"/>
</shared-library>
2、add in $SOA_INSTANCE\j2ee\soa\application-deployments\default\JmsAdapter\oc4j-ra.xml
<imported-shared-libraries>
<import-shared-library name="apache.activemq"/>
</imported-shared-libraries> -
I'd like to know how can I send files from one computer to another, because I'm making a Client-Server application and I need to send files, in my program de client needs to send a file to the server and the server has to save the file in the computer where the server is running, and I'd like to know if there's some way to sends files with sockets.
Cleint
1. reads the name of the file sent by the server
2. get the file from sec memory
3. put it into a byte stream(read the file as byte)
4. typecast to inputstream of the rmi server
server
read the inputstream and write to the file -
How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?
File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.
-
How can I send files from my macbook pro to my iPad air using airdrop
how can I send files from my macbook pro to my iPad air using airdrop?
Your going to have to find some alternative. See Dukto will work.
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11
"Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks. You can buy a license to run box one of your servers.
https://www.box.com/
Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares) protocols"
https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
"The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance." " Includes choice of private cloud on-premise."
http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
Maybe you are looking for
-
Servlets, request.getParameter()
How do I test a servlet in Jdeveloper that wants a param from the calling URL, like http://.../servlet?myparam=myvalue via val=request.getParameter("myparam"); I did already figure out, how to get init-Parameters, from webtogo.ora with getInitParamet
-
Hello,i have a problem with the Ipod,is that the Ipod doesn't sync all the songs in my Itunes. I have 373 songs in my Ipod and 512 sons in my Itunes. What do i do?
-
Materialized view log with multiple materialized views
DB: 9.2.0.8 Yes its old. I am not allowed to upgrade it. I have a set of materialized views that are created off of 5 base tables. They do fast refreshes. So I have multiple materialized views for the same base table and same materialized view log. 1
-
Interrupting clnt_call in Solaris 10 using signals
Is there a way to interrupt a clnt_call() before it times out in Solaris 10 using signals? Under Solaris 2.6, we were able to send a client a SIGINT, the client would accept the signal, reset the timeout using clnt_control() and then immediately time
-
Locked in Emergency Mode after Upgrading to 3.0
I had a pass-code set on my phone before upgrading to 3.0. Now it wants me to connect to itunes. I connect to itunes but it wont sync because I haven't entered the password. My problem is that it does not give me an opportunity to enter the pass-code