How to configure SFTP seeburger adapter
Hi All,
Has anyone worked with Seeburger adapter? Could someone tell me how to configure it in XI ?
XIer
Hi XIer,
Check out the following links
http://www.seeburger.com/sftp_xi/
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Best Regards,
Guza
Message was edited by:
liad aharoni
Similar Messages
-
How do we do File content conversion using SFTP SEEBURGER Adapter
HI All,
Can we do FCC using SFTP SEEBURGER adapter. If yes how?
XIerDynamic attributes are part of the XI message. They provide options for dynamical configuration of SFTP receiver channels (Outbound direction) using parameters that have been dynamically added or set by modules and mappings before the SFTP adapter. These attributes can be set using the Attribute Mapper module for example. Besides, the SFTP adapter dynamically adds specific parameters to the XI message on Inbound case, which can be used by the modules and mappings after SFTP adapter.
Check also
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Regards
Naycho -
How to configure SFTP Adapter in XI?
Hi All,
How to configure SFTP adapter in XI?, It would be great if anyone sends a step-by-step documentation on the same.
Thanks in advanceHi,
About SFTP .
1) SFTP (Secure File Transfer Protocol)
"SSH File Transfer Protocol" or SFTP is a network protocol that provides file transfer and manipulation functionality over any reliable data stream. It is typically used with the SSH-2 protocol to provide secure file transfer. SFTP encrypts the session, preventing the casual detection of username, password or anything that is being transmitted. One key benefit to SFTP is its ability to handle multiple secure file transfers over a single encrypted pipe. By using a single encrypted pipe, there are fewer holes in the corporate firewall.
SFTP:
As per the latest SAP PI/XI support pack, it does not support SFTP via File Adapter.
So alternative approach to cater this requirement from XI is to make use of Unix Script at OS level to transfer the files from/to third-party systems.
Inbound Interface - i.e. third-party system ->XI->SAP:
File is transferred to a folder in SAP XI landscape from the third-party legacy system using UNIX Script with secured protocol. Once the file is ready in the XI landscape, File Adapter will poll this directory and file is picked up by NFS protocol.
Outbound Interface i.e. SAP->XI->third-party system:
XI is responsible for writing a file into a folder in the XI landscape. These files are transferred to the third-party system by executing UNIX scripts with secured protocol i.e. via sFTP.
Pre-Requisites:
Public key should be exchanged between external systems and the PI system.
UNIX shell script has to be developed and scheduled.
Advantages:
Highly Secured.
Ability to handle multiple secure file transfers over a single encrypted pipe .By using a single encrypted pipe, there are fewer holes in the corporate firewall.
Disadvantages:
Two-Step process i.e. XI>Temporary folder>External System and vice-versa
Files have to be temporarily stored in XI server.
Multiple failure points i.e. XI and Unix script execution
Maintenance of an external UNIX script.
Difficulty in monitoring the execution of the shell script as it cannot be monitored thru XI.
Need to generate keys and install it in the SFTP site as a pre-requisite i.e. SFTP clients must install keys on the server.
SFTP uses keys rather than certificates. This means that it can't take advantage of the "chains of trust" paradigm facilitated through Certificate Authorities.
Files from the XI server should be deleted/archived in a periodic manner to increase the disc space so that it will increase the performance.
Note: UNIX shell Script can be executed as a background job or' can be triggered from SAP XI through OS command at File adapter level.
Check the links.
Secure FTP (SSH) with the FTP Adapter
Secured File Transfer using SAP XI
Secure FTP in SAP XI
Regards,
Phani
Reward points if Helpful -
How to configure sender mail adapter
Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu SinghalHi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin -
How to Configure Microsoft loopback adapter in windows 2008
Hi all,
I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime.
I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont know about it. so i m not able to proceed
further. it gives osme error about local host. i think its about Microsoft loopback adapter. can anyone have idea abt it.How to
Configure Microsoft loopback adapter in windows 2008?
Can anyone help me ASAP coz i m stucked like anythng.
thanks
CheersHi vinay
Thanks for reply...I m Installing SAP IDES...with DB2
I have upload JCE zip file...after clicking next button i m getting following Errors,
ERROR 2014-10-02 09:52:29
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2014-10-02 09:52:29
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
How i can get rid of it.
Thanks -
How to configure an jms adapter to use ActiveMQ?
Does anyone have an example of how to configure an jms adapter of oracle esb
for third party JMS provider to use ActiveMQ?
I had done something as follow:
1、add activemq shared-library in $SOA_INSTANCE/config/service.xml
2、config a jms adapter fro third party use paramter:
java.naming.factory.initial org.apache.activemq.jndi.ActiveMQInitialContextFactory
java.naming.provider.url tcp://10.20.30.26:61615
but I got a error:ERRJMS_CONN_FAC_NOT_FOUND.
Caused by: javax.naming.NameNotFoundException: org.apache.activemq.ActiveMQConnectionFactory
at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:225)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at oracle.tip.adapter.jms.JMS.JMSFactory.jndiLookup(JMSFactory.java:237)
at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:138)
... 51 more
what should I do? can someone give me a detail resolvent?I also had done as follows:
1、add activemq shared-library to shared-library named "oracle.esb" in server.xml :
<shared-library name="oracle.esb" version="10.1.3">
<import-shared-library name="apache.activemq"/>
</shared-library>
2、add in $SOA_INSTANCE\j2ee\soa\application-deployments\default\JmsAdapter\oc4j-ra.xml
<imported-shared-libraries>
<import-shared-library name="apache.activemq"/>
</imported-shared-libraries> -
How to configure RFC receiver adapter
HI,
I have a Proxy-to-RFC scenario. But I have no knowledge in RFC receiver adapter. Could you please provide me the step-by-step guideline or sample about how to configure RFC receiver adapter.
Thanks in advance.
Best regards, Johnney.Hi,
Refer these links which will help you understand the concept and configure the Scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
The specified item was not found.
Refer this blog for synchronous scenario
RFC Scenario using BPM --Starter Kit
Sender RFC Adapter:
The specified item was not found.
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> file scenario: application stopped
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfctofile&cat=sdn_all
RFC to file
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Send RFC to SAP XI Asynchronous
The specified item was not found.
ABAP Proxies in XI(Client Proxy)
Regards,
Nithiyanandam -
Issue in receiver SFTP seeburger adapter
Dear all,
We have a proxy to sFTP scenario.
The target message is being delivered to a sFTP system using a receiver sFTP Seeburger adapter.
I have this error being shown in the receiver channel.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>> Details: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true, >> Description: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>> Details: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true.
The Seeburger WorkBench monitoring has a 2 error entries which says
1. PUT command for file <TEMP_20110406_115127.TXT> is in progress.
2. "Error on send, will be retried"
Finally, the .txt file is partially written in the receiver system.
If anyone has any inputs/pointers to resolve this issue. Pls share the details.
regards,
Jack.Hi Jack,
We are also facing the same problem with the seeburger SFTP adapter. If you find the solution , Plz let us know.
Thanks,
Soumya. -
How to Configure Receiver Mail Adapter?
I need to designed a BPM if Message is failed to update database then send an e-mail to alias group in Microsoft outlook by using Receiver Mail adapter.
Can someone help me to design above BPM and how I need to configure receiver mail adapter.
Thanks in advance!
MrudulaI am getting <Trace level="3" type="T">Unknown channel type: Mail</Trace> when it tries to call "MAIL" adapter.
Does anyone has any clue where should I look?
Thanks!
Mrudula
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: Mail</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" /> -
How to Configure Reciver HTTP Adapter
Hi,
i am doing Proxy-HTTP syncronous scenario.
Proxy will fetch XML file located in one server.
(example: www.yahoo.com/exchange_rate.xml)
i have following problems.
1. How to configure the Reciver HTTP Adapter.
2. What should I use in Address Type.
HTTP Destination or URL Address.
3. If I use HTTP Destination , The length of the field is very short to accomodate complete address.
4. If I use URL address, what should I put in all the fields , like Target host, Service Number, path.
I have URL , something like this, www.yahoo.com/exchangerates.xml
I dont know what to put in Target Host, service name and path.
Please help. thx. BD.Hello,
if you use a HTTP-Destination it uses a rfc-destination.
So you configure first a rfc-destination (in sm59 of type G)
and name it for example RFC_EXAMPLE and then you
use this name for the HTTP-Destination in your adapter.
if you use the url
Target host:
- you can use the ip
Service Number:
- that means the port you want/must use
path:
- in your case: /exchangerates.xml
Regards
Patrick -
How to configure Sender IDOC adapter
Hi could someone pls guide me on the steps that i need to take to configure IDOC sender adapter..
Are the steps for Sender and Receiver IDOC adapter same other than the fact that sender idoc adapter doesn't need a sender communication channel.
Regards,
Ashishhi Goyal,
Just check out this link.
How to Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards
Sachin -
How to configure for GPlus Adapter with SAP Phone and SAP CRM
Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
GovindaHi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen -
How to configure the jms adapter
hi all,
i got some trouble trying to configure de JMS adapter, i 'd be glad if some colud give me a hand with this. i'am wordering if there is a complete document about this topic to help me out with de configuration.
thk u all very much.
Regards, PabloHi,
The below URL will help you to understand what is JMS, how to configure and do a testing.
http://learn-oraclesoa.blogspot.co.uk/2013/04/oracle-jms-adapter-tutorial.html
Below will help you to configure the JNDI for JMS
http://manojm-nair.blogspot.co.uk/2013/02/configuring-connection-jndis-for-jms_13.html
Thanks,
Vijay -
SFTP Seeburger adapter - Could not find channel for report handling between
Hello Friends ,
We have R3 -> PI-> SFTP scenario . The messages are transferred successfully and the file is successfully received at the receiving end . But when we do communication channel monitoring , we see errors in Receiver CC . The Reciever CC contains SFTP adapter (Seeburger) . Recently the Seeburger adapter is upgraded and the below error has started occuring then onwards .
Error Message which we see in CC monitoring for Receiver CC (SFTP) is as below .
Initiation of Transmission Report( job id: da405030-30c6-11df-8b6e-797b8921162c milestone: 290) failed! Exception occured: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) - com.seeburger.xi.connector.fw.ConfigurationException: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) [3/16/10 8:40 AM]
Could experts help me ...
Thanks for your time .
Regards,
Laxman Nayak .Hi,
I also have the error you mentioned but we're implementing the Seeburger SFTP adapter for the first time.
I've requested transport acknowledgements in my ABAP proxy and have checked the 'Deliver transmission report' flag in the adapter but I don't know what else I must do.
Any help would be greatly appreciated.
Thanks,
Alan -
How to configure reciever mail adapter
Hi All,
I have gone through your weblog for configuring reciever mail adapter BY PRASAD ULAGAPPAN.
I have few doubts .
Message protocol == XIALL.
If I am providing my mail address in MAIL ATTRIBUTES-TO parameter
then what do we have to exactly specify in connection parameters.
I want to send a mail from XI to my ID. Suppose my id is [email protected] .
So if I am providing this ID in " TO " parameter then what should I specify in connection parameters
i.e url = ?
user = ?
password = ? (which password to specify , usually we dont require to give password to recieve mails )
Please help me with this.
Waiting for your reply.
Thanks in advanceHi Yomesh,
The below help URL gives explanation for 'Connection Parameters for Mail Server':
http://help.sap.com/saphelp_nw04/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
You need to provide your mail server details. When you send a mail normally, say from outlook, you configure it to connect to some SMTP/IMAP server, using username/password.
Provide that server details in URL.
If you dont use user/password to connect to it, leave it blank.
Also fill the 'From' mail address.
For eg., if there is a internet connectivity to your XI server, and you want to use SMTP server of yahoo to send out mails, then you can give:
URL: smtp://smtp.mail.yahoo.com
userid: yomeshsharma
password: <your yahoo password>
In this case, both your From & TO details are same.
You can change 'TO' to send to a different mail address.
regards,
Pops V
Message was edited by: Pops V
Maybe you are looking for
-
hallow i wont example in regular abap like select stetmet and how i do that in abap objects (the same code)and which benefit i have in using objects. Regards
-
Can I backup multiple users on one mac with Personal Backup X5
Thinking of getting Personal Backup X5 by Intego. I have 4 users on my one mac and need to be able to back up each user's home directory. Does anyone have experience with this app? Can I do this? What do you think if PB X5? Thanks
-
Any idea why I can't purchase stuff off either iTunes or AppStore? I am getting a message saying unknown error has occurred immediately I enter my password.
-
What is the risk of changing the order of the security providers?
I have developed a SFTP solution for Webmethods. Webmethods has IAIK (class iaik.security.provider.IAIK) as its default DH provider. To get the SFTP solution to work, I had to change the DH provider to SunJCE. I did that through changing the order of
-
Best Laptop for a college student?
Hi, I'm an entering college freshman at Mississippi State University, and I'm having a little trouble finding a laptop that meets all of the University Engineering specs. Here are the specs... 1.8 GHz or faster Dual Core processor or equivalent. 2 Gb