How to configure smar host iron port

Hi All,
we have messaging server 6.3 we want to pass all mail through ironport,which file we have to mention smart host ironport.
Regards
kamal

kkdas wrote:
we have messaging server 6.3 we want to pass all mail through ironport,which file we have to mention smart host ironport.Refer here:
http://docs.sun.com/app/docs/doc/819-4428/bgaqy?a=view
Regards,
Shane.

Similar Messages

How to configure the sort and port of a SOAP address dynamically

Hi All,
In the wsdl we have the SOAP Address defined but in practice we would like to configure the host and the port. As the server on which the service resides may/will change.
For example:
http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
We would like to configure the proxy to point to say:
http://<host>:<port>//sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
What we see in the Proxy Code is:
port.setSOAPAddress(new com.sap.flex.ws.runtime.SOAPAddress("http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003"));
How could this be achieved.
Please help.

Hi Sumit,
Thanks for the quick response. However, I do not want to change the host and the port in the wsdl. I want it to be so, that it will pick the host and port dynamically(as you have mentioned). However, in out case, the web service has the SOAP address hardcoded as <b>http://usciq74.wdf.sap.corp:50077</b>.
We would want to write something as http://host:port and then let it pick the host and port dynamically. How is that possible.
Best Regards,
Debashree.

How to configure snmp host in IPM?

Hi!!! I have CiscoWorks 2000 Rwan with IPM. I installed and configure IPM to send snmp traps when the treshold is excedeed. I can see on the graph that it is exceeded but I can not verify that it sending snmp traps.Where to view these traps and how to configure snmp reciver host?
Can I use CW2k syslog analyzer automated action to generate mail when get this trap?
THANKS FOR ANY HELP!!!!
Regards
Enes

Hi,
As you've discovered, IPM can help configure
these traps:
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/ipmcw2k/cipm25/ug/ipmfaq.htm#62205
But, you'll need to specify a dedicated NMS
server to receive these traps. The following
documentation should prove to be useful:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa5.shtml
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml
You can use the appropriate "debug" command on
the router to confirm that traps are, in fact,
being sent.
The traps themselves are defined in the
CISCO-RTTMON-MIB.my and cannot interact
with the CW2000 syslog analyzer automated
action.
Thanks,
Roger

How to configure FXO and FXS port?

hi,
can anyone help me on how to configure FXO port on 2820 router and FXS port on 2810.
What are the things i need to configure to make a voip network that connect to PSTN network and PBX?

hi
do refer this link which can provide you fair idea to get started with your configs.
http://www.cisco.com/en/US/partner/tech/tk1077/tech_configuration_examples_list.html
regds

Tomcat 5.5 context.xml, how to configure the Host element

[Probably this question should be asked elsewhere, if so please advise]
Dear all,
I understand that Tomcat 5.5 prefers that your web application comes with a context.xml file under the META-INF folder.
So I added a context.xml file under the META-INF folder of my web application,
please have a look below.
context.xml
<Context path="" docBase="C://Program Files//Apache Software Foundation//Tomcat 5.5//webapps//test">
     <Resource
          name="jdbc/testDB"
          factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
          auth="Container"
          type="javax.sql.DataSource"
          maxActive="10"
          maxIdle="5"
          maxWait="10000"
          removeAbandoned="true"
          removeAbandonedTimeout="60"
          logAbandoned="true"
          username="username"
          password="password"
          driverClassName="com.mysql.jdbc.Driver"
          url="jdbc:mysql://localhost:3306/test" />
</Context> Ok, that is good so far, but how do I configure the Host element.
I mean how do you link a specific Host to a specific Context?
Before, the Context element was a sub element of the Host element,
now it is completely separated.
Host in server.xml
<Host name="www.test.com" deployOnStartup="true" debug="0" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">
     <Valve
          className="org.apache.catalina.valves.FastCommonAccessLogValve"
          prefix="test_access_log."
          suffix=".txt"
          pattern="common"
          directory="C://Program Files//Apache Software Foundation//Tomcat 5.5//webapps//test//logs"/>
</Host> I assume that if I modify the appBase of the Host element from webapps to webapps/test then it would work, but if I have several
Contexts for the specific Host, how should I configure it then?
Please help by giving examples!

OK, I have changed the Host's appbase to webapps/mytestapplication.
I want to deploy a test.war under the appbase:
webapps/mytestapplication/test.war
The name of the host is www.test.com
Because the war file is not named ROOT.war (instead it is named test.war),
the URL to the test application would be www.test.com/test.
Now I have several relative anchor links in the test application
Say for example the test application is deployed and accessed through www.test.com/test.
Clicking on the aboutus link would change to URL to www.test.com/aboutus.html.
Instead, for this to work, the URL must be www.test.com/test/aboutus.html.
Obviously, the easiest solution is to add /test before each anchor link:
But the there must a different solution.
Adding a path to Context element did not work:
<Context path="/test" ...>
</Context>
Question:
1. what is the solution for the anchor scenario above, should I add /test before each link?
2. Is my configuration (can be seen at the bottom) correct?
Basically, I have removed the path and docBase attributes from the Context element.
I have also set autoDeploy to false in the Host element.
Here are a few paragraphs from the docs:
autoDeploy attribute of Host element:
"Finally, note that if you are defining contexts explicitly,
you should probably turn off automatic application deployment.
Otherwise, your context will be deployed twice each, and that may cause problems for your app."
OK, so I set autoDeploy to false since I am defining contexts explicitly, (META-INF/context.xml)
docBase attribute of Context element:
The value of this field must not be set when the Context
is configured using a META-INF/context.xml file as it will be inferred by the automatic deployment process.
So, I remove the docBase attribute eventhough I am confused a bit.
This is the part that confuses me:
If autoDeploy is set to false since I am defining contexts explicitly,
how can then anything be inferred by the automatic
deployment process? (please answer!)
There should not be any automatic deployment process when autoDeploy is set to false.
path attribute of Context element:
The value of this field must not be set except when statically defining a Context in server.xml,
as it will be inferred from the filenames used for either the .xml context file or the docBase.
Same as the Context element.
Thanks!
<Context>
     <Resource
          name="jdbc/testDB"
          factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
          auth="Container"
          type="javax.sql.DataSource"
          maxActive="10"
          maxIdle="5"
          maxWait="10000"
          removeAbandoned="true"
          removeAbandonedTimeout="60"
          logAbandoned="true"
          username="username"
          password="password"
          driverClassName="com.mysql.jdbc.Driver"
          url="jdbc:mysql://localhost:3306/test" />
</Context>
<Host name="www.test.com" deployOnStartup="true" debug="0" appBase="webapps/mytestapplication" unpackWARs="true" autoDeploy="false" xmlValidation="false" xmlNamespaceAware="false">
     <Valve
          className="org.apache.catalina.valves.FastCommonAccessLogValve"
          prefix="test_access_log."
          suffix=".txt"
          pattern="common"
          directory="C:/Program Files/Apache Software Foundation/Tomcat 5.5/webapps/mytestapplication/test/logs"/>
</Host>

How To Configure non-standard SMTP port

My ISP has blocked port 25. I have a service that will deliver mail to the port of my choosing. How do I configure Leopard Server to listen on a non-standard SMTP port? 2525 for example.
Also, I assume all I have to do on my Airport Express is set up NAT to rake external port 2525 and point it to the private address of my email server on port 2525. Is this correct?
Thanks,
-ernie

Assuming such is offered, look to acquire a business-class ISP service level, and move on to the next issue? The business-class services typically provide static IP address(es), opens up server ports, and sets up DNS and ISP-side server connections for your hosts. And you can call your ISP or other assistance when your network craters; non-standard connections are (as you've found) harder to support.
One subtlety here: in a number of cases, simply having a business-class service means you're supported by a different group within (larger) ISPs. This can be a significant advantage at times, given that the scripts and tools and such that are available for the business group will be rather more targeted than the scripts that are available for the residential services group at the ISP.
There are a number of folks that have sought and have tried this (try a few Google searches for SMTP and non-standard port), and it mostly works. But it is fragile, and tends to be derailed when something goes weird, or when the ISP spots and shapes or blocks the server traffic.
Also check your ISP's terms of service here, lest your network pipe be subject to summary disconnection.
The other option is to VPN or tunnel into to a co-lo or dedicated server or a virtual hosting service; to run your servers or virtual servers somewhere without firewalls blocking the standard ports.

How to configure virtual hosts and separate tiers

The configuration we require with WLS must:
1) provide virtual hosts that can operate under their own SSL environments (some one way, some two way, with different certs)
2) perform all XML parsing of received message objects in the web layer in order to (a) offload CPU from ejb layer to web layer and (b) prevent any malformed message from penetrating to the ejb layer - reject in the web layer
3) the web tier must be physically separate from the ejb tier - an integrated WLS server is not acceptable for security reasons
4) the ejb layer must be clusterable
5) DNS round robin is sufficient protection for web layer failover
I do not see clearly how to accomplish this configuration using the WLS suite. Would appreciate guidance on this prior to plunking down big dollars for licenses.
Thanks

The configuration we require with WLS must:
1) provide virtual hosts that can operate under their own SSL environments (some one way, some two way, with different certs)
2) perform all XML parsing of received message objects in the web layer in order to (a) offload CPU from ejb layer to web layer and (b) prevent any malformed message from penetrating to the ejb layer - reject in the web layer
3) the web tier must be physically separate from the ejb tier - an integrated WLS server is not acceptable for security reasons
4) the ejb layer must be clusterable
5) DNS round robin is sufficient protection for web layer failover
I do not see clearly how to accomplish this configuration using the WLS suite. Would appreciate guidance on this prior to plunking down big dollars for licenses.
Thanks

How to configure my AEBS to port fowarding?

The problem is that i cannot give or receive any webcam from my friend on aMsn or Yahoo Messenger. I know that i need to give a static IP to my computer and do port fowarding but i dont know how.
We have two iMac here, that are connected to internet via my AEBS. Secondly, I use a airport Express to stream music in my receiver and to connect my blu-ray my disc player and my Wii to internet.
So how arranged that without creating problem with my whole network?
Please, I would appreciated a clear method like 1- go to,... 2- click on,...
Thanks

Hello IacsaP. Welcome to the Apple Discussions!
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): <enter the appropriate UDP port values>
o Public TCP Port(s): <enter the appropriate TCP port values>
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How To Configure TREX Name Server&Port for UDDI Service Registry Settings

Hello Experts,
we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
If I do so, I receive "Connection to TREX not successful".
When I press the Update TREX button I receive this exception:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
I am not sure if the port number is correct -> is there a way to lookup the correct port number?
Is there something else I should configure?
Thanks for help, best regards
Thomas

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

How to configure SMTP dynamic send port?

Hi,
I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
I have a dynamic send with following values.
msgEMail(SMTP.CC) = “[email protected]”;
msgEMail(SMTP.DeliveryReceipt) = False;
msgEMail(SMTP.From) = “[email protected]”;
msgEMail(SMTP.ReadReceipt) = False;
msgEMail(SMTP.Password) = “XXX;
msgEMail(SMTP.Username) = “DDD”;
msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
msgEMail(SMTP.Subject) = “sdfgdfgd;
msgEMail(SMTP.MessagePartsAttachments) = 2;
Message gets suspended with the following error message.
A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
[email protected]" is suspended.
Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
Line 1, position 1.
MessageId:
{3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
Please can some advise me what is wrong here? do you think I have configured
msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
Thanks
SS
Shiva Sadayan

Hi Shiva,
You should not be using XMLTransit pipeline at the send port.
Perhaps you should go with default passthrough pipeline or
Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
I found this article very useful while sending email from BizTalk. Refer:
Sending Emails in Biztalk
Rachit
Please mark as answer or vote as helpful if my reply does

How do you configure the set of port to use for FTP passive data connection

I was able to start the ftp server xml db and connect to it locally. When I tried to connect to it from home, I was able to log in but when i do a "get" command the sessions hangs. I also tried passive mode and do a "get" command and it gives me a connection refused error. I am using the default port 2100. I think this might be a firewall issue with the data connection port. I am not sure which range of ports to open for the passive ftp connection on the server side or where to go and set them for for the ftp server to use? Or this issue might not be firewall related??? Any thoughts. Thanks.

This is a typical problem with VPN/Firewall software and FTP on ports other than 21.
When you open the FTP data connection the FTP Server identifies which port the data will be sent on using the PORT command which is sent on the command port (typically 21 with a normal FTP server, 2100 by default with XDB). THe client then opens that PORT to accept the data (file, output of an ls etc).
As I understand it most VPN/Firewall are configured to monitor 21 for 'PORT' requests. They then understand to allow connection on the PORT number passed on the command PORT. Hence with Port 21 firewall / VPN software is not a problem. However since the XDB command PORT is something other than 21 they do not see / honour the PORT commands from the server and hence the client cannot open the data connection on the specified PORT
As to how to solve it, I wish I knew (After 5 years I still can't use XDB FTP from home to a machine in the office once the VPN tunnel is open :( ). I'm sure it's going to be firewall / VPN software specific and may need the VPN servers to be configured.
The best bet would be to run the FTP server on 21...
Add the following line to your listener.ora file
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = hostname) (PORT = 21))
(PROTOCOL_STACK = (PRESENTATION = FTP) (SESSION = RAW)))
and then restart the listener as root
Start the listener as root.
At the operating system prompt, enter tnslsnr with optional command line arguments. The usage is as follows:
tnslsnr [listener_name] [-user user] [-group group]
where:
Table 4-3 tnslsnr Utility Options
Option Description
listener_name
Specify the name of the listener. If omitted, the default name LISTENER will be used.
-user user
Specify the user whose privileges the listener will use when super user (root) privileges are not needed. After performing the privileged operations, the listener will give up root privileges irreversibly.
-group group
Specify the group whose privileges the listener will use when super user (root) group privileges are not needed. After performing the privileged operations, the listener will give up root group privileges irreversibly.
The listener will temporarily switch to the provided user and group immediately after startup. All subsequent operations will be done with the specified user and group privileges, except the system calls necessary to listen on configured endpoints. The listener will revert to super user (root) for a short period of time to listen on reserved addresses, such as TCP ports less than 1024. After the listener starts listening on all of its endpoints configured in listener.ora, it will switch to the specified user and group irreversibly. Therefore, the listener will give up the root privilege that it initially had. In the current release, -user and -group command line arguments only accept user and group identifiers specified in numeric form.
For example, to execute a root listener called mylsnr and have it use privileges of a user identified

How to Configure SMTP Port in ODI

Hi,
Someone know how to configure SMTP port in the ODI tool? I tried changing the port number in the odiparams but I still encountered an error:"Could not connect to SMTP host." when executing the odisendmail package object though I can access the SMTP Server thru tracetcp.
TIA,
Cathy

950484 wrote:
Hi Bhabani,
Thanks for the quick response :) . I saw your post and its a nice approach in sending mail instead of using an odi package object odisendmail. However, the requirement is not to use the gmail credentials but to use the credentials provided to us. But I noticed that the port used for the SMTP server is not the default port number which is 25. So I am guessing that the reason why I cannot connect to the SMTP host is because of the port number. Do you know how to solve this?If you want to change the SMTP port then do the following
edit smtplib.py located at <ODI_HOME>/oracledi/lib/scripting/LIB
change SMTP_PORT to what ever port you want .
restart ODI
execute your mail sending program

How to configure the eth1 port of NIcRIO 9024 to another IP address and subnet mask

Hi ,
I am using cRIO 9024 and am planning to configure it to be an MMS server that interacts with a client which is in another network with different IP and subnetmask. I want to run the server VIs from the host computer via the eth0 port and want to communicate the MMS messages through the eth1 port. the eth0 port is configured as a static IP as shown in the screenshot attached and would like to assign a separate IP and subnet mask to the other port . But when I try to save the configuration I get the error "Could not save your changes tot he target.The subnet mask for eth1 is invalid" .
I have already directly cross connected the Crio and have disabled the firewalls and still am not able to configure it.
1) is it possible to configure the ethernet ports to have separate IPs corresponding to different networks and thus the subnet masks?
2) If its possible then what is the mistake i am doing while configuring it ?
I would be extremaly grateful to have a reply on this as its pretty desperate to spend a lot of time just to set up the IP configurations..!!!!!
Regards
Abhinav

Dear Abhinav,
I'm sorry but what you are tryining to do is not suported by the Second Ethrnet Port on any cRIO and so you getting this error meeage.
Here a abstract out ouf the KnowledgeBase How do I Configure the Dual Ethernet Ports on Real-Time Controllers?:
Ethernet port 2 is currently not supported to communicate outside its own subnet. There is no capability of configuring the Default Gateway for Ethernet port 2 and therefore cannot connect to a large isolated intranet. However, there appears to be a common misconception that this port can only be used for communication between NI products: this is not the case, though any communication through the secondary port must be within the same subnet.
Kind Regards,
SG3 | Applications Engineering | National Instruments | NIG |

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

How to configure network virtualization in SCVMM 2012 R2 with two host

hi everyone... can you teach me how i configure networking in my infrastructure..
i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
i have been tried before with the networking which i want..but it failed...
any one help me please...

This whitepaper should explain the required steps to get this working.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How to configure smar host iron port

Similar Messages

Maybe you are looking for