How to configure SNMP agent for Oracle 10g
Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
Carles
Hello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles
Similar Messages
-
VSS Agent for Oracle 10g ?
Hi there,
I have SAP NW2004s, Windows 2003 server 64bit, Oracle 10g
4 partition with 1 hdd, C for OS, D for SAP application E for system and oracle logs+archived, F for only database files
We are trying to get backup in extrinal HDD 3TB HDD... through Symantic exec backup utility ver. 12
C and D drivers are backup fine, but sometime when server very busy and symantic start full backup for E and D drive database shutdown... sap instance is fine, but only DB instance is stoped
We are not using Symantec Agent software, is there any other software can help for that for-exmaple VSS for oracle 10g... if yes, where may i get this software any link?
Why we are not using BR tools:
1 - as i maintion before when I select "E" drive which is all logs files located symantec stoped db instance
2 - in case if i am taking backup from brtools full backup online + archived so its only take database backup + archived, not all others structure in case hard-drive failer, and data restore from symantec so its will be ok with C drive and D drive, but its nohting resotre for E and D
when I try to restore from oracle brtools to restore its getting an error for missing structure in E
so thats why I am looking only one solution either perfect symantec with online backup
please give me some advised
ThanksHi,
Please use the standard & reliable Backup/Restore methods for any DB, to avoid more headache while Backup/Restore Operations.
Please refer [this thread|Re: Need some advise]. it will attend your most of questions. Some other alternatives (without using Backup agent) are mentioned there.
If you use Backup Agent to perform any DB backup, then It will be reliable method to perform Backup/Restore operations of DB.
With BR*tools u can also perform Non-Database Backup. Please refer [this link|http://help.sap.com/saphelp_NW04/helpdata/en/0c/cd271365debc42bef96ac7fd907787/frameset.htm] and other relative links.
If you have configured the Backup Exec utility with Oracle agent on the DB server, then you can perform Online Backup by deselecting "Perform the backup offline" option withing that Oracle Backup Job properties.
Regards,
Bhavik G. Shroff -
How to get best material for Oracle 10G PL/SQL
Please help me out to get best material for Oracle 10G PL/SQL form oracle site.
Thanks in AdvanceThere's no special book or material related Oracle 10g PL/SQL. Can you explain what you want ?
Please refer to this page for more information:
http://www.oracle.com/technology/tech/pl_sql/index.html
Edited by: Kamran Agayev A. on Aug 14, 2009 11:41 AM -
Failure to start agent for oracle 10g in window
Hi Experts,
I am using oracle 10G R4 in 32 bit window 2003.
I saw agent stop in EM. I just restart dbconsole form window side.
Now I saw that emgent with DBSNMP takes hight CPU (20-40%)
I try to stop and restart dbconsole does not fix this issue.
I just check that agent does not running even dbconsole is working on.
below is copy :
D:\oracle\product\10.2.0\SALE\BIN>SET ORACLE_SID=SHQ
D:\oracle\product\10.2.0\SALE\BIN>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://xxxxxx:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsole
SHQ service is starting................
The OracleDBConsoleSHQ service was started successfully.
D:\oracle\product\10.2.0\SALE\BIN>emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
D:\oracle\product\10.2.0\SALE\BIN>emctl start agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
What dio I do can start agent?
i run emctl status agent that does not work.
Thanks for help
JIMHi anand,
Thanks for your help.
I check this DOC in metalink.
But I stil can not get AGENT_HOME patch based on document.
I try to use emctl getemhome however, I could not see ../../oracle1oGagent that document concern point
I need to do create <agent_service_name> <AGENT_HOME>\bin\nmesrvc.exe auto
How do I find agent home patch?
Thanks
JIM -
How to configure http server in oracle 10g
Hi
I am configuring apex 3.2.1 on oracle 10g 10.2.0 I need help how to configure http server bec i did not find any Apache file or folder in 10g if it is then how .
ArshadHi
I use to configure only this in $ORACLE_HOME/forms/server/forms.conf (and restart ias):
AddType application/x-orarrp rrp_
AddType application/x-orarrp-text rrpt
AddType application/x-orarrp-ps rrpp
AddType application/x-orarrp-pdf rrpa
AddType application/x-orarrp-rtf rrpr
AddType application/x-orarrp-html rrph -
How to configure Remort Printing in Oracle 10g
Hi,
I want to configure orarrp utility in my oracle 10g oracle application server. Can any one help to install the utility and please let me know what are the Pre request to install that.
I hope I need to change the httpd.conf file in oracle application server but I didn't find that file in (C:\DevSuiteHome_1\Apache\Apache\conf)
I really appreciate your support
ChaituHi,
Please post your question in the appropriate forum.
Category: Application Server
http://forums.oracle.com/forums/category.jspa?categoryID=193
Thanks,
Hussein -
Configuring udev rules for Oracle 10g R2 Rac on OEL 5.5 U4 with Qnap
I'm trying to setup a 10g RAC Cluster following the guide by Jeff Hunter on http://www.idevelopment.info/
I have to admit, im no Linux admin, and have searched round the net for help with the following Issue.
I'm trying to set my iSCSI targets to have persistent mappings using udev rules
This is what I have done so far
[root@racnode1 Server]# iscsiadm -m discovery -t sendtargets -p nas-priv | grep 192.168.2.196
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d
-- Manually Log into iSCSI Targets
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 -l
-- Make iSCSI Targets Automatically Login
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
-- Create Persistent Local SCSI Device Names
- Identify Mappings
[root@racnode1 ~]# (cd /dev/disk/by-path; ls -l qnap | awk '{FS=" "; print $9 " " $10 " " $11}')
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdg
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdf
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdi
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdd
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdj
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdc
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sde
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdh
- Create Rules File
cat >> /etc/udev/rules.d/55-openiscsi.rules <<EOF
# /etc/udev/rules.d/55-openiscsi.rules
KERNEL=="sd*", BUS=="scsi", PROGRAM="/etc/udev/scripts/iscsidev.sh %b",SYMLINK+="iscsi/%c/part%n"
EOF
- Create Shell Script
mkdir -p /etc/udev/scripts
vi /etc/udev/scripts/iscsidev.sh
#!/bin/sh
# FILE: /etc/udev/scripts/iscsidev.sh
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
# This is not an open-scsi drive
if [ -z "${target_name}" ]; then
exit 1
fi
# Check if QNAP drive
check_qnap_target_name=${target_name%%:*}
if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
target_name=`echo "${target_name%.*}"`
fi
echo "${target_name##*.}"
chmod 755 /etc/udev/scripts/iscsidev.sh
service iscsi stop
service iscsi start
[root@racnode1 ~]# ls /dev/iscsi/*
ls: /dev/iscsi/*: No such file or directory
1.) For some reason I cannot get the mappings to work correctly, I have rebooted the server and tried a number of different changes in the rules script. But for the life of me I cannot get it work.
I noticed when I rebooted the server that it failed to execute the iscsidev. When I manually run the shell script with a parameter it produces output
Can anyone help me to get this up and running?
2.) My QNAP Nas doesnt seem to publish iSCSI targets to only one NIC. I think this is down to the firmware/feature not being available. When I discover targets I get the following
[root@racnode1 ~]# (cd /dev/disk/by-path; ls -l *qnap* | awk '{FS=" "; print $9 " " $10 " " $11}')
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdh
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdm
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdn
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sde
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdr
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdd
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdk
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdp
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdi
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdg
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdo
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdj
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sds
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdf
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdc
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdl
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdq
It shows the same targets on both NIC's, I only need them on the private ip 192.168.2.196
Edited by: user1728822 on 07-May-2011 15:53
Edited by: user1728822 on 07-May-2011 16:08Hi,
I'm facing the same issue.. If your issue is fixed..could you please let me know?
I'm trying to configure 11g RAC with OPenfiler and got stuck here.
Regards,
Kumar -
RH Linux VIP configuration not working for Oracle 10g RAC installation
Hi all,
I am trying to setup my test cluster on Oracle 10gR2 and Red Hat Linux 4. I have the public and private networks working fine and setup. However, after I setup the two VIP addresses, I cannot even ping these two virtual IPs from Linux. CRS install fails during initial run because it cannot communicate with the two VIP IP addresses. Can anyone help me out as to how to go about fixing the two VIPs so that Linux can ping them and CRS will install?
ThanksIt sounds like you configured your VIP on Linux in advance, before installing Oracle.
You are not supposed to do that.
Decide on an IP that the VIP will use with your network manager, but don't configure it in Linux. So before you start the clusterware install, ifconfig should not show your VIP.
CRS does not need VIP when you install the clusterware, only the interconnect address.
VIP is configured using a utility called VIPCA. If Clusterware installation fails and you think it was caused by VIP issues, try running VIPCA manually and let us know what were the results. -
SAP database cluster for oracle 10g
Dear Experts,
Can anybody give me some idea on how do SAP database clustering for oracle 10g on two different remote system.
Is there any sapnote for this or any other help document. Is it possible to do on two different remote system.
Please guide me.
Thanks n regards
BhaskarHi Bhaskar,
do you have SDN account, that allow you to access customer available information in SDN?
If yes, please look at the
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8cd93-f1e9-2910-c186-86bfff3dac63">MSCS Configuration and Support Information for SAP NetWeaver '04 and 7.0</a>
On page 20 you will find some helpful information.
best regards -
Hi all!
i am trying to configure snmp with oracle 10g so that i can monitor oracle from some network management system like tivoli, spectrum etc.
i checked in my $ORACLE_HOME/network , but there is no snmp directory ...nor does it have peer. Do i need to run some script to create the snmp directories or there is another path for the
CONFIG.master
CONFIG.encap
start_peer
files??? Please let me know if someone has configured that???
Also, how do you test whether the agent is running on the server or not??Hi,
I'm trying to configure snmp for oracle 10g on Linux using OEM agents.
I followed all the steps mentioned in:
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16244/chap2.htm#CHDCCEFB
I'm nto getting any output when I did snmp walk using below command:
snmpwalk -t 30 -M /usr/share/snmp/mibs/ -m all -c public localhost rdbmsMIB
When I did snmpwalk using below command:
snmpwalk -t 30 -M /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc -m all -c public localhost rdbmsMIB (only difference here with the above command is mibs directory)
output:
Cannot find module (CHARACTER-MIB): At line 7 in /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc/database.v1
Unlinked OID in RDBMS-MIB: rdbmsMIB ::= { mib-2 39 }
Cannot adopt OID in RDBMS-MIB: rdbmsWellKnownLimitedResources ::= { rdbmsObjects 10 }
Cannot adopt OID in RDBMS-MIB: rdbmsRelTable ::= { rdbmsObjects 9 }
Here I'm trying to monitor Oracle statistics through zenoss console. As an initial est i'm trying to configure the snmp for oracle 10g. Please provide me the complete list of steps on what to do after installing OEM for my requierment.
This will be a great help to me..
You can also mail me at [email protected]
Thanks,
Ranjeet -
Installing and configuring PHP for ORACLE 10g Release 1
Hello Lads,
Please can anybody help me finish PHP install...
I have got this error when executing the following command..
#make install
Here is the error:
/usr/local/php-5.1.4/sapi/cli/php: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Thanks!I answered in your other thread... the one without the I in the title :)
nstalling and configuring PHP for ORACLE 10g Release 1 -
Archiving Best Practices / How To Guide for Oracle 10g - need urgently
Hi,
I apologize if this is a silly question. But i need a step by step archiving guide for Oracle 10g and cannot find any reference document. I am in a rather remote part of S.E. Asia & can't seem to find DBA's with the requisite experience to do the job properly. I have had 1 database lock up this week at a big telecoms provider and another one at a major bank is about to go. I can easily add LUNS & re-structure mirrors etc at the Unix level [ i am a Unix engineer ]
but i know that is not the long run solution. I am sure the 2 databases i am concerned about have never been archived properly.
This is the sort of thing DBA's must do all the time. Can someone point me to the proper documentation so i can do a proper job and archive a few years data out of these databases. I do not want to do a hack job. At least i can clone the databases and practise on the clones first before i actually do production.
-thanks very much
-gregoire
[email protected]I'm not so sure this is a general database question, as it would be specific to an application and implementation, and as the technology has changed, the database options to support it has too.
So for example, if you have bought the partitioning option, there may be some sensible procedure for partitioning off older data.
Things may depend on whether you are talking about an OLTP, a DW, a DSS, or mixed systems.
DBA's do it all the time because the requirements are different everywhere. Simply deleting a lot of data after copying the old data to another table (as some older systems do) may just wind up giving you performance problems scanning swiss-cheesed data.
Some places may not archive at all, if they've separated out OLTP from reporting. If all the OLTP stuff is accessed through indices, all the older stuff just sits there. The reporting DB may only have what is needed to be reported on, or be on a standby db where range scans are sufficient to ignore old data. There there's exadata, which has it's own strengths.
Best Practices have to be on similar enough systems, otherwise they are a self-contradiction.
Get yourself someone who understands your requirements and can evaluate the actual problem. No apology needed, it is not a silly question. But what is silly is assuming what the problem is with no evidence. -
Any doc or guide on how to install Linux for Oracle 10g
I am looking for any documentation or guide which will describe the step by step process for installing RedHat Linux Enterprise 4 for Oracle 10g database installation.
Note.. i am not looking for Oracle installtion guide.. I need RedHat installation guide for oracle 10 database installation.This will be your best bet.
I was able install Oracle using the docs on this site.
http://www.puschitz.com/ -
SNMP monitoring of Oracle 10g?
Hi there,
I'm curious about using SNMP technology to monitor Oracle 10g databases.
I've done some light reading on the subject and I'm now at the stage
where I have a few questions.
-What exactly do I need to configure in my Oracle 10g environment?
-Is Enterprise Manager the best and/or only UI available for me
to carry out configuration chores?
-I see no SNMP specific documentation for 10g; why is that?
-I do see a good document for 9i:
Oracle SNMP Support Reference Guide Release 9.2.0 Part Number A96672-01
http://download-west.oracle.com/docs/cd/B10501_01/em.920/a96672/toc.htm
Is the above document suitable for configuring SNMP monitoring of Oracle
in a 10g environment?
-moiI'm able to set up traps via the EM website following these instructions:
http://download-west.oracle.com/docs/cd/B19306_01/em.102/b40002/notification.htm
However, what I'm really looking for is the ability to do snmp gets. I need functionality similar to how the old school DBSNMP under OMS used to work. These commands seem to be totally missing. I found the following documentation:
http://download-east.oracle.com/docs/cd/B19306_01/em.102/b16244/chap2.htm#sthref74
Which indicates there should be an snmp subfolder under $ORACLE_HOME/sysman, but that folder does not exist in my installation. I installed Oracle EE. Is there another package I need to install in order to make the subagent run like a normal snmp agent?
So far if I do a:
emctl start dbconsole
that starts up the EM Website and I can use that no probelm. If I...
emctl start agent -- I get:
Starting agent ... started.
issuing a 'emctl staus agent' gives me a normal status message. Things start to get strange when I try to start the subagent, which to my understanding is what I need running in order to to talk to net-snmp, which is the master agent running on this host. Here's what happens:
[zaro@cheetah bin]$ ./emctl start subagent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Starting sub agent .....started
[zaro@cheetah bin]$ ./emctl status subagent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Sub agent is not running..
I guess my question is how do I get to have the ability I used to have back in 8i to start up dbsnmp and then have my SNMP monitoring app "discover" the agent and use its instrumentation to get data? -
How to create new database on Oracle 10g
Hi All,
Can any one tell me how to create new database on oracle 10g.
Thanks in Advance for your help.again some confusion here.....
u said u need a new database in your first post and now you saying u need a new schema..
one database has many schemas(users)..... ex: scott,sys,system are few of them...
now it depends you need seperate database for test,dev environment - this is in the case u have many schemas under each database and many tables(objects) under each schema.
OR
You just need a separate schema (in same db) for test,dev environment...where in you will have multiple tables in each schema...U need to know the dba credentials of the db to create a new schema.
ideally u need to have different database...You can create one with out sys/system(oracle users) password as these passwords are db dependent.
what you need is access to the any machine where server is installed(can be the same mc where you have your dev db or a diff machine) and that will be the machine where your db will be installed (can do it through database configuration assistance),ofcourse you will need windows authentication for this.
so you login to the same machine or access it from your machine using remote login.
I hope that is clear.Hope i am not listing things that you already know..Just did it coz of confusion between db and schema
Message was edited by:
coolguy
Maybe you are looking for
-
okay, today my software updater launched and prompted me to download and install the update to iTunes and to iPod updater and so i did that. later in the day, i went to charge and update the podcasts on my iPod for a trip i was going to take. i was p
-
Switching from windows based system to Apple Mac
I'm switching from windows to mac before that i would like to know which Professional SLR Camera Brands are compatible with mac. Message was edited by: acyd226
-
How do I stop all the emails from ASC, I went to the privacy policy and shut it off there but it says it takes 10 days to kick in, meanwhile I'm getting 100's off emails and was only interested in a specific topic, but I'm getting emails on everythin
-
After downloading new version of ITunes all Office Programs icons changed to ITunes and only open ITunes. OS is Windows7 64bit machine
-
Error Message on iTunes 45048 using Windows XP
Can someone please help? On my iTunes account I have a number of tracks - all purchased via my iPad or iPhone and need to download to my PC (XP is the Operating System) however, when you go the the iCloud symbol and click to download the following er