How to configure snmp host in IPM?

Hi!!! I have CiscoWorks 2000 Rwan with IPM. I installed and configure IPM to send snmp traps when the treshold is excedeed. I can see on the graph that it is exceeded but I can not verify that it sending snmp traps.Where to view these traps and how to configure snmp reciver host?
Can I use CW2k syslog analyzer automated action to generate mail when get this trap?
THANKS FOR ANY HELP!!!!
Regards
Enes

Hi,
As you've discovered, IPM can help configure
these traps:
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/ipmcw2k/cipm25/ug/ipmfaq.htm#62205
But, you'll need to specify a dedicated NMS
server to receive these traps. The following
documentation should prove to be useful:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa5.shtml
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml
You can use the appropriate "debug" command on
the router to confirm that traps are, in fact,
being sent.
The traps themselves are defined in the
CISCO-RTTMON-MIB.my and cannot interact
with the CW2000 syslog analyzer automated
action.
Thanks,
Roger

Similar Messages

How to configure SNMP on all managed client using SCCM 2012 SP1

hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?

As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com

How to configure SNMP on SG300 using CLI

Hi,
Does anyone know how to configure SNMP on the Cisco SG300 switches? I have the SG300-10P. I am not fully familiar with the new command line interface on this device, it was easy on the IOS but finding it a nightmare on this one.
I put the following command in but it didnt work.
snmp-server view Interfaces interfaces included
snmp-server community ACB123 ro 10.x.x.x view default
I tried to follow the guidelines on the cisco website but thats all Web interface based, i can only access the switch remotely via CLI.
Thanks

Hi Rafik, here is a basic snmp v1/v2 configuration
snmp-server server
snmp-server community test1234 rw view DefaultSuper
This is basically wide open to anyone who knows the password. This should be enough to get you started then you can tweak additional options as you go. Give this a test, see if you can do what you're trying to do then modify this sample to work for your security needs.
-Tom
Please mark answered for helpful posts

How to configure snmp on loopback interface, on vrf TEST, in ASR 9000 series

Hi there!
How to configure snmp v2, with community string, for ASR 9000 series, in interface loopback 1, that has vrf TEST
Regards!

oh that is somewhat vague, but let me try...
in order to enable snmp access to an interface in a vrf you need to enable MPP (management plane protection) in that vrf.
Something like this:
control-plane
management-plane
inband
interface Loopback100
allow all
if you have this and it doesn't work, a config snippet and some debugs (like debug snmp packet) will help to define what to do next.
regards
xander

How to configure SNMP on DMS or DMP?

for the first, English is not my mother tounge, so I may write a lot of mistake of my words.
One of my customer want to infomation of DMP that is down or up with SNMP tool.
I had download the tool named 'SNMP TESTER' and test with DMP, and DMS.
But the DMP has no SNMP configure set module or command. Only DMM has one sections of it's administrator - settings.
I changed the DMM setting like this
Queries
Query Operations : Enabled
Read Community : public
Notifications
Notification Operations : Enabled
Hostname or IP Address : 172.16.100.143
Port : 162
Trap Community : public
==========================================================
and my SNMP tester settings below.
Host name or address : 172.16.100.251
Community name : public
and these are logs of fail to test.
2012-11-07 17:27:04 - Starting SNMP test...
2012-11-07 17:27:04 - Connecting to
[email protected]
2012-11-07 17:27:05 - ERROR: Unable to complete the test.
2012-11-07 17:27:05 - ERROR: Data is incorrect (13)
2012-11-07 17:27:05 - [SNMP status] .1.3.6.1.2.1.1.1.0, .1.3.6.1.2.1.1.5.0, .1.3.6.1.2.1.4.1.0: No such name (#1)
==========================================================
My SNMP tester installed PC IP : 172.16.100.143
DMM : 172.16.100.251(Version 5.2)
DMP 4400 : 172.16.100.85 (UP status)
The SNMP service looks enabled. In fact, I'm not sure it's configure is right and working.
I'm not close to SNMP. So, I hope your experts will show me greatful kindness.
just two thing that the customer wants is simple.
OID number status 2 code and show them to within SNMP Tester. (UP & Down 2 status OID code needed)
How can I test the SNMP service is working and Showing the status of DMP within SNMP Tester?
P.S I attached the SNMP Tester program for your testing.

Hi Rafik, here is a basic snmp v1/v2 configuration
snmp-server server
snmp-server community test1234 rw view DefaultSuper
This is basically wide open to anyone who knows the password. This should be enough to get you started then you can tweak additional options as you go. Give this a test, see if you can do what you're trying to do then modify this sample to work for your security needs.
-Tom
Please mark answered for helpful posts

How to configure snmp on solaris 10

hi, i am working on solaris management console(smc) .i want to configure snmp for this to send traps regarding my system performance and cpu usage ..can any body know ho to do this

I could use some help with this as well ... so far I have been unable to find a clear and concise document that can walk me through configurin gSNMP. Clean Solaris 10 installation, snmpdx is running - now how do I configure it? Better yet, how do I disable snmpdx and run net-snmp?
Please, someone help or at least paste a link to an article somewhere...

How to configure snmp on solaris 10 for sending traps to any EMconsole

i am working on solaris management console(smc) .i want to configure snmp for this (smc)to send traps regarding system performance and cpu usage ..can any body know ho to do this .i am new to solaris ..learned some basic administration of it ..

I could use some help with this as well ... so far I have been unable to find a clear and concise document that can walk me through configurin gSNMP. Clean Solaris 10 installation, snmpdx is running - now how do I configure it? Better yet, how do I disable snmpdx and run net-snmp?
Please, someone help or at least paste a link to an article somewhere...

How to configure SNMP agent for Oracle 10g

Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
Carles

Hello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles

Tomcat 5.5 context.xml, how to configure the Host element

[Probably this question should be asked elsewhere, if so please advise]
Dear all,
I understand that Tomcat 5.5 prefers that your web application comes with a context.xml file under the META-INF folder.
So I added a context.xml file under the META-INF folder of my web application,
please have a look below.
context.xml
<Context path="" docBase="C://Program Files//Apache Software Foundation//Tomcat 5.5//webapps//test">
     <Resource
          name="jdbc/testDB"
          factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
          auth="Container"
          type="javax.sql.DataSource"
          maxActive="10"
          maxIdle="5"
          maxWait="10000"
          removeAbandoned="true"
          removeAbandonedTimeout="60"
          logAbandoned="true"
          username="username"
          password="password"
          driverClassName="com.mysql.jdbc.Driver"
          url="jdbc:mysql://localhost:3306/test" />
</Context> Ok, that is good so far, but how do I configure the Host element.
I mean how do you link a specific Host to a specific Context?
Before, the Context element was a sub element of the Host element,
now it is completely separated.
Host in server.xml
<Host name="www.test.com" deployOnStartup="true" debug="0" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">
     <Valve
          className="org.apache.catalina.valves.FastCommonAccessLogValve"
          prefix="test_access_log."
          suffix=".txt"
          pattern="common"
          directory="C://Program Files//Apache Software Foundation//Tomcat 5.5//webapps//test//logs"/>
</Host> I assume that if I modify the appBase of the Host element from webapps to webapps/test then it would work, but if I have several
Contexts for the specific Host, how should I configure it then?
Please help by giving examples!

OK, I have changed the Host's appbase to webapps/mytestapplication.
I want to deploy a test.war under the appbase:
webapps/mytestapplication/test.war
The name of the host is www.test.com
Because the war file is not named ROOT.war (instead it is named test.war),
the URL to the test application would be www.test.com/test.
Now I have several relative anchor links in the test application
Say for example the test application is deployed and accessed through www.test.com/test.
Clicking on the aboutus link would change to URL to www.test.com/aboutus.html.
Instead, for this to work, the URL must be www.test.com/test/aboutus.html.
Obviously, the easiest solution is to add /test before each anchor link:
But the there must a different solution.
Adding a path to Context element did not work:
<Context path="/test" ...>
</Context>
Question:
1. what is the solution for the anchor scenario above, should I add /test before each link?
2. Is my configuration (can be seen at the bottom) correct?
Basically, I have removed the path and docBase attributes from the Context element.
I have also set autoDeploy to false in the Host element.
Here are a few paragraphs from the docs:
autoDeploy attribute of Host element:
"Finally, note that if you are defining contexts explicitly,
you should probably turn off automatic application deployment.
Otherwise, your context will be deployed twice each, and that may cause problems for your app."
OK, so I set autoDeploy to false since I am defining contexts explicitly, (META-INF/context.xml)
docBase attribute of Context element:
The value of this field must not be set when the Context
is configured using a META-INF/context.xml file as it will be inferred by the automatic deployment process.
So, I remove the docBase attribute eventhough I am confused a bit.
This is the part that confuses me:
If autoDeploy is set to false since I am defining contexts explicitly,
how can then anything be inferred by the automatic
deployment process? (please answer!)
There should not be any automatic deployment process when autoDeploy is set to false.
path attribute of Context element:
The value of this field must not be set except when statically defining a Context in server.xml,
as it will be inferred from the filenames used for either the .xml context file or the docBase.
Same as the Context element.
Thanks!
<Context>
     <Resource
          name="jdbc/testDB"
          factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
          auth="Container"
          type="javax.sql.DataSource"
          maxActive="10"
          maxIdle="5"
          maxWait="10000"
          removeAbandoned="true"
          removeAbandonedTimeout="60"
          logAbandoned="true"
          username="username"
          password="password"
          driverClassName="com.mysql.jdbc.Driver"
          url="jdbc:mysql://localhost:3306/test" />
</Context>
<Host name="www.test.com" deployOnStartup="true" debug="0" appBase="webapps/mytestapplication" unpackWARs="true" autoDeploy="false" xmlValidation="false" xmlNamespaceAware="false">
     <Valve
          className="org.apache.catalina.valves.FastCommonAccessLogValve"
          prefix="test_access_log."
          suffix=".txt"
          pattern="common"
          directory="C:/Program Files/Apache Software Foundation/Tomcat 5.5/webapps/mytestapplication/test/logs"/>
</Host>

How to configure SNMP in solaris 10

i am working on solaris management console .i want to configure snmp for this to send traps regarding system performance and cpu usage ..can any body know ho to do this

Integration of Directory Server SNMP agent with Solaris Master agent is documented in the Administration Guide Chapter 14: Monitoring Directory Server using SNMP.
http://docs.sun.com/source/817-7613/snmp.html
Regards,
Ludovic.

How to configure snmp for oracle

can any one send a document in configuring snmp for oracle

Go to http://tahiti.oracle.com
Search for SNMP
Sybrand Bakker
Senior Oracle DBA

How to configure virtual hosts and separate tiers

The configuration we require with WLS must:
1) provide virtual hosts that can operate under their own SSL environments (some one way, some two way, with different certs)
2) perform all XML parsing of received message objects in the web layer in order to (a) offload CPU from ejb layer to web layer and (b) prevent any malformed message from penetrating to the ejb layer - reject in the web layer
3) the web tier must be physically separate from the ejb tier - an integrated WLS server is not acceptable for security reasons
4) the ejb layer must be clusterable
5) DNS round robin is sufficient protection for web layer failover
I do not see clearly how to accomplish this configuration using the WLS suite. Would appreciate guidance on this prior to plunking down big dollars for licenses.
Thanks

The configuration we require with WLS must:
1) provide virtual hosts that can operate under their own SSL environments (some one way, some two way, with different certs)
2) perform all XML parsing of received message objects in the web layer in order to (a) offload CPU from ejb layer to web layer and (b) prevent any malformed message from penetrating to the ejb layer - reject in the web layer
3) the web tier must be physically separate from the ejb tier - an integrated WLS server is not acceptable for security reasons
4) the ejb layer must be clusterable
5) DNS round robin is sufficient protection for web layer failover
I do not see clearly how to accomplish this configuration using the WLS suite. Would appreciate guidance on this prior to plunking down big dollars for licenses.
Thanks

How to Configure SNMP Counter Monitors

Hi there,
I want to receive a SNMP trap if attributes of the SNMP Agent (JMX
MBeans) change in WLS 6.1. I'm playing around with the PetStore
example that is part of the package. I enabled SNMP and configured
localhost as a TrapHost, great ! Now I want to configure a couple of
Counter and Attribute Monitors. What do I put for
Monitored MBean Type
Monitored MBean Name
Monitored Attribute Name
if I want to monitor e.g.
ejbEntityHomeRuntimeTransactionsCommittedTotalCount Attribute in the
EJBEntityHomeRuntime Table ??
I have trouble getting it working,
thanks for any help,
Alex
Bonus question: Do I need to do this always with the Admin Console or
can I edit the config.xml file myself ?

well, here is the way you can set up a SNMP String Monitor for monitoring
the changes to the FileName attribute in the LogMBean:
Monitored MBean Type - Log
Monitored MBean Name - myserver
Monitored Attribute Name - FileName
The easiest way to figure these attributes is with the help of the
JavaDocs for MBeans. Please verify the data type that the method returing
attribute that you are trying to monitor with the type of the monitor you
are trying to set.
ie, you cannot setup a String monitor for a boolean attribute in the
mbean.In the case above, the getFileName method returns a String object,
so it makes sense to set a String monitor for it!
You can setup your monitor for EJBEntityHomeRuntime in a similar fashion!
Its not necessary to specify the complete ObjectName in the
MonitoredMBeanName. as the WLS constructs it automatically from the the
Name, Type and the target to which you target this trap monitor.
Hope this helps,
Mihir
Alex wrote:
Hi there,
I want to receive a SNMP trap if attributes of the SNMP Agent (JMX
MBeans) change in WLS 6.1. I'm playing around with the PetStore
example that is part of the package. I enabled SNMP and configured
localhost as a TrapHost, great ! Now I want to configure a couple of
Counter and Attribute Monitors. What do I put for
Monitored MBean Type
Monitored MBean Name
Monitored Attribute Name
if I want to monitor e.g.
ejbEntityHomeRuntimeTransactionsCommittedTotalCount Attribute in the
EJBEntityHomeRuntime Table ??
I have trouble getting it working,
thanks for any help,
Alex
Bonus question: Do I need to do this always with the Admin Console or
can I edit the config.xml file myself ?

How to configure SNMP on WAP610N Autonomous Accesspoints

Hi all,
I want to add WAP610N Access point for monitoring in my Prime Infrastructure but i didnt find any option of SNMP in
WAP610N accesspoint ...i want to know whether there is any way to add these accesspoint to PI.

Depending on the version of PI you are using, there is a device support list which you can find here. This is for PI 2.0:
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/release/notes/cpi_rn.html#wp43885
You do need snmp compatible devices to be able to add to PI.
Sent from Cisco Technical Support iPhone App

How to configure smar host iron port

Hi All,
we have messaging server 6.3 we want to pass all mail through ironport,which file we have to mention smart host ironport.
Regards
kamal

kkdas wrote:
we have messaging server 6.3 we want to pass all mail through ironport,which file we have to mention smart host ironport.Refer here:
http://docs.sun.com/app/docs/doc/819-4428/bgaqy?a=view
Regards,
Shane.

How to configure snmp host in IPM?

Similar Messages

Maybe you are looking for