How to configure SNMP on DMS or DMP?
for the first, English is not my mother tounge, so I may write a lot of mistake of my words.
One of my customer want to infomation of DMP that is down or up with SNMP tool.
I had download the tool named 'SNMP TESTER' and test with DMP, and DMS.
But the DMP has no SNMP configure set module or command. Only DMM has one sections of it's administrator - settings.
I changed the DMM setting like this
Queries
Query Operations : Enabled
Read Community : public
Notifications
Notification Operations : Enabled
Hostname or IP Address : 172.16.100.143
Port : 162
Trap Community : public
==========================================================
and my SNMP tester settings below.
Host name or address : 172.16.100.251
Community name : public
and these are logs of fail to test.
2012-11-07 17:27:04 - Starting SNMP test...
2012-11-07 17:27:04 - Connecting to
[email protected]
2012-11-07 17:27:05 - ERROR: Unable to complete the test.
2012-11-07 17:27:05 - ERROR: Data is incorrect (13)
2012-11-07 17:27:05 - [SNMP status] .1.3.6.1.2.1.1.1.0, .1.3.6.1.2.1.1.5.0, .1.3.6.1.2.1.4.1.0: No such name (#1)
==========================================================
My SNMP tester installed PC IP : 172.16.100.143
DMM : 172.16.100.251(Version 5.2)
DMP 4400 : 172.16.100.85 (UP status)
The SNMP service looks enabled. In fact, I'm not sure it's configure is right and working.
I'm not close to SNMP. So, I hope your experts will show me greatful kindness.
just two thing that the customer wants is simple.
OID number status 2 code and show them to within SNMP Tester. (UP & Down 2 status OID code needed)
How can I test the SNMP service is working and Showing the status of DMP within SNMP Tester?
P.S I attached the SNMP Tester program for your testing.
Hi Rafik, here is a basic snmp v1/v2 configuration
snmp-server server
snmp-server community test1234 rw view DefaultSuper
This is basically wide open to anyone who knows the password. This should be enough to get you started then you can tweak additional options as you go. Give this a test, see if you can do what you're trying to do then modify this sample to work for your security needs.
-Tom
Please mark answered for helpful posts
Similar Messages
-
How to configure SNMP on all managed client using SCCM 2012 SP1
hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com -
How to configure SNMP on SG300 using CLI
Hi,
Does anyone know how to configure SNMP on the Cisco SG300 switches? I have the SG300-10P. I am not fully familiar with the new command line interface on this device, it was easy on the IOS but finding it a nightmare on this one.
I put the following command in but it didnt work.
snmp-server view Interfaces interfaces included
snmp-server community ACB123 ro 10.x.x.x view default
I tried to follow the guidelines on the cisco website but thats all Web interface based, i can only access the switch remotely via CLI.
ThanksHi Rafik, here is a basic snmp v1/v2 configuration
snmp-server server
snmp-server community test1234 rw view DefaultSuper
This is basically wide open to anyone who knows the password. This should be enough to get you started then you can tweak additional options as you go. Give this a test, see if you can do what you're trying to do then modify this sample to work for your security needs.
-Tom
Please mark answered for helpful posts -
How to configure snmp on loopback interface, on vrf TEST, in ASR 9000 series
Hi there!
How to configure snmp v2, with community string, for ASR 9000 series, in interface loopback 1, that has vrf TEST
Regards!oh that is somewhat vague, but let me try...
in order to enable snmp access to an interface in a vrf you need to enable MPP (management plane protection) in that vrf.
Something like this:
control-plane
management-plane
inband
interface Loopback100
allow all
if you have this and it doesn't work, a config snippet and some debugs (like debug snmp packet) will help to define what to do next.
regards
xander -
How to configure snmp host in IPM?
Hi!!! I have CiscoWorks 2000 Rwan with IPM. I installed and configure IPM to send snmp traps when the treshold is excedeed. I can see on the graph that it is exceeded but I can not verify that it sending snmp traps.Where to view these traps and how to configure snmp reciver host?
Can I use CW2k syslog analyzer automated action to generate mail when get this trap?
THANKS FOR ANY HELP!!!!
Regards
EnesHi,
As you've discovered, IPM can help configure
these traps:
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/ipmcw2k/cipm25/ug/ipmfaq.htm#62205
But, you'll need to specify a dedicated NMS
server to receive these traps. The following
documentation should prove to be useful:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa5.shtml
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml
You can use the appropriate "debug" command on
the router to confirm that traps are, in fact,
being sent.
The traps themselves are defined in the
CISCO-RTTMON-MIB.my and cannot interact
with the CW2000 syslog analyzer automated
action.
Thanks,
Roger -
How to configure snmp on solaris 10
hi, i am working on solaris management console(smc) .i want to configure snmp for this to send traps regarding my system performance and cpu usage ..can any body know ho to do this
I could use some help with this as well ... so far I have been unable to find a clear and concise document that can walk me through configurin gSNMP. Clean Solaris 10 installation, snmpdx is running - now how do I configure it? Better yet, how do I disable snmpdx and run net-snmp?
Please, someone help or at least paste a link to an article somewhere... -
How to configure snmp on solaris 10 for sending traps to any EMconsole
i am working on solaris management console(smc) .i want to configure snmp for this (smc)to send traps regarding system performance and cpu usage ..can any body know ho to do this .i am new to solaris ..learned some basic administration of it ..
I could use some help with this as well ... so far I have been unable to find a clear and concise document that can walk me through configurin gSNMP. Clean Solaris 10 installation, snmpdx is running - now how do I configure it? Better yet, how do I disable snmpdx and run net-snmp?
Please, someone help or at least paste a link to an article somewhere... -
How to configure SNMP agent for Oracle 10g
Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
CarlesHello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles -
How to configure SNMP in solaris 10
i am working on solaris management console .i want to configure snmp for this to send traps regarding system performance and cpu usage ..can any body know ho to do this
Integration of Directory Server SNMP agent with Solaris Master agent is documented in the Administration Guide Chapter 14: Monitoring Directory Server using SNMP.
http://docs.sun.com/source/817-7613/snmp.html
Regards,
Ludovic. -
How to configure snmp for oracle
can any one send a document in configuring snmp for oracle
Go to http://tahiti.oracle.com
Search for SNMP
Sybrand Bakker
Senior Oracle DBA -
How to Configure SNMP Counter Monitors
Hi there,
I want to receive a SNMP trap if attributes of the SNMP Agent (JMX
MBeans) change in WLS 6.1. I'm playing around with the PetStore
example that is part of the package. I enabled SNMP and configured
localhost as a TrapHost, great ! Now I want to configure a couple of
Counter and Attribute Monitors. What do I put for
Monitored MBean Type
Monitored MBean Name
Monitored Attribute Name
if I want to monitor e.g.
ejbEntityHomeRuntimeTransactionsCommittedTotalCount Attribute in the
EJBEntityHomeRuntime Table ??
I have trouble getting it working,
thanks for any help,
Alex
Bonus question: Do I need to do this always with the Admin Console or
can I edit the config.xml file myself ?well, here is the way you can set up a SNMP String Monitor for monitoring
the changes to the FileName attribute in the LogMBean:
Monitored MBean Type - Log
Monitored MBean Name - myserver
Monitored Attribute Name - FileName
The easiest way to figure these attributes is with the help of the
JavaDocs for MBeans. Please verify the data type that the method returing
attribute that you are trying to monitor with the type of the monitor you
are trying to set.
ie, you cannot setup a String monitor for a boolean attribute in the
mbean.In the case above, the getFileName method returns a String object,
so it makes sense to set a String monitor for it!
You can setup your monitor for EJBEntityHomeRuntime in a similar fashion!
Its not necessary to specify the complete ObjectName in the
MonitoredMBeanName. as the WLS constructs it automatically from the the
Name, Type and the target to which you target this trap monitor.
Hope this helps,
Mihir
Alex wrote:
Hi there,
I want to receive a SNMP trap if attributes of the SNMP Agent (JMX
MBeans) change in WLS 6.1. I'm playing around with the PetStore
example that is part of the package. I enabled SNMP and configured
localhost as a TrapHost, great ! Now I want to configure a couple of
Counter and Attribute Monitors. What do I put for
Monitored MBean Type
Monitored MBean Name
Monitored Attribute Name
if I want to monitor e.g.
ejbEntityHomeRuntimeTransactionsCommittedTotalCount Attribute in the
EJBEntityHomeRuntime Table ??
I have trouble getting it working,
thanks for any help,
Alex
Bonus question: Do I need to do this always with the Admin Console or
can I edit the config.xml file myself ? -
How to configure SAP ECC DMS content repository with CRM Services Object
hi,
we have SAP Document management system which is currently integrated with SAP R/3 Ecc system .
with ref. to sap standard functionality i am able to upload the document in DMS content repository through SAP R/3 Ecc System as below.
step-1 ,T.code:CV01n
a. create - DMS Documents
b. Oupload Scanned documents in DMS system
c. select content repository
d. Save Document
now, in same manner i want to store business documents in SAP ECC R/3 DMS content repository using CRM services trnsaction"CRMD_ORDER". kindly guide me suitably.
regards,
sunili am explaining your proble
a. create - DMS Documents
b. Oupload Scanned documents in DMS system
c. select content repository
d. Save Document
after saving open to document in cv02n and track status of doc i.e. AR CR & RE
if RE status is there the it will repositor at server
Regards,
Sanjeev -
How to configure SNMP on WAP610N Autonomous Accesspoints
Hi all,
I want to add WAP610N Access point for monitoring in my Prime Infrastructure but i didnt find any option of SNMP in
WAP610N accesspoint ...i want to know whether there is any way to add these accesspoint to PI.Depending on the version of PI you are using, there is a device support list which you can find here. This is for PI 2.0:
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/release/notes/cpi_rn.html#wp43885
You do need snmp compatible devices to be able to add to PI.
Sent from Cisco Technical Support iPhone App -
Hi all,
I need a script so that once it is run on windows 2012 server r2 ,snmp should be installed and configured automatically ,giving minimum user inputs.Things like snmp server ip,community string shouls be configured.
SNMP services should be up and running with the scriptHi,
Please check if you can use
Install-WindowsFeature PowerShell command to enable SNMP. Meanwhile, please also refer to following article and check if can help you.
How
to Install SNMP Remotely
However, based on your description, the issue seems to be more related to script. I suggest that you should
post it in
Windows PowerShell forum or
Official Scripting Guys forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to configure link between 2921 and SM-D-ES3G-48-P EtherSwitch Service Module
hi,
I can't do that like the procedure given by Cisco.
http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1942894
Cisco Procedure :
interface gi10/0
ip address x.x.x.x x.x.x.x
service-module gigabitethernet 1/0 session
My result :
R2921-8CPITR-1(config)#int gi 1/1
R2921-8CPITR-1(config-if)#ip address 2.2.2.2 255.255.255.192
% IP addresses may not be configured on L2 links.
R2921-8CPITR-1(config-if)
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1.1 ?
% Unrecognized command
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1 ?
<cr>
R2921-8CPITR-1(config)#
the session is not possible also ?
R2921-8CPITR-1#service-module gigabitEthernet 1/1 sess
^
% Invalid input detected at '^' marker.
R2921-8CPITR-1#
The routeur said that it's not a L3 port, so how to configure it to allow communication between the 2921 and the card ?
Is there a bug with that version I'm in 15.1(4)M4 ????
R2921-8CPITR-1#sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
R2921-8CPITR-1 uptime is 19 hours, 21 minutes
System returned to ROM by power-on
System restarted at 16:00:45 GAB Fri Sep 14 2012
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FGL1618119E
6 Gigabit Ethernet interfaces
2 terminal lines
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 CISCO2921/K9 FGL1618119E
Technology Package License Information for Module:'c2900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc None None None
data None None None
Configuration register is 0x2102
R2921-8CPITR-1#Same issue here.
I just waited a few minutes and the interface went down and back up, this time it was a L3 interface.
My guess is that it was booting the switch module IOS, and it detected it until it was fully booted:
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:26:52.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
Apr 11 05:27:46.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
Apr 11 05:27:47.031: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
Apr 11 05:27:47.083: %LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to administratively down
Apr 11 05:27:47.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Apr 11 05:27:48.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to down
Apr 11 05:27:49.283: %IP-5-WEBINST_KILL: Terminating DNS process
Apr 11 05:27:52.499: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
Apr 11 05:27:53.087: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 16:50 by prod_rel_team
Apr 11 05:27:53.255: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Apr 11 05:27:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
Apr 11 05:28:21.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Apr 11 05:29:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down
Apr 11 05:29:22.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Router>en
Router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES unset administratively down down
GigabitEthernet0/0 unassigned YES unset administratively down down
GigabitEthernet0/1 unassigned YES unset administratively down down
GigabitEthernet0/2 unassigned YES unset administratively down down
GigabitEthernet1/0 unassigned YES unset administratively down down
GigabitEthernet1/1 unassigned YES unset up down
Vlan1 unassigned YES unset down down
Router#
Apr 11 05:29:46.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to upconf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g1/0
Router(config-if)#ip add 1.1.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
Apr 11 05:30:09.046: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:30:10.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Router(config-if)#end
Maybe you are looking for
-
Report not printing to LOCL printer.
HI Gurus, I am facing an issue with printing a specific report to a local (LOCL) printer. Every time i try to print the report nothing happens at the printer. I am able to print other reports to that printer successfully, but not a sp
-
Hi guys, I'm having a nokia 9300i and it automatically switches off and turns on... can any one tell me wat the problem is and wat should i do??
-
Form extremely slow to fill in.
I have a form that I created and it is extremely slow to fill in. I created it on PC and fill it in on a Galaxy Tab S 10.5. I had a different version of same form and it filled out fine. It just printed way to light. I darkened the form and scanned i
-
Problem in entering Target Quantity for scheduling agreement
Hi All, While I create a new Scheduling agreement and enter teh target quantity system throws an error showing that target value is too large. But I want to enter the same quantity & can't reduce the same. while seeing the help of the error it says
-
Hepl: Sync photos from iTunes at the reel not a Phototeca
Even now when I sync photos from iTunes, photos from iPhoto on the iPhone were stored on the reel. Now, do not know why, the photos saves in Phototeca them. How I can do to make the save again on the reel? I I can sync photos directly from iPhoto? Pl