How to Configure SOA db connection

Hi Firends,
I successfully installed SOA on linux using the 10g DB.
Then later I installed 11g Database on another Oracle_Home.
How do I configure SOA so that it will connect to my 11g DB instead of the 10g DB?
Thanks a lot

You have to realize what is involved with certifying a database with the SOA suite, for it to be certified a full regression test has to be run, and as you can imagine this is a time consuming exercise, therefore it is only done for major patchset releases. So when database 11g came out after 10.1.3.3. there is no way that it can be certified, at the next major patchset release you will probably find it becomes certified.

Similar Messages

  • How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    Hi ,
     Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA  outside interface . 
    Accordingly you can configure NAT 
    HTH
    Sandy . 

  • How to configure SOA in Integrated WLS Server for JDEV 11.1.1.1.0

    Hi,
    I am trying to deploy a SOA Application but it says No SOA Configured targets found. How can I configure SOA on Integrated Weblogic Server in JDeveloper.
    Thanks

    Okay, so the Admin server controls the connection. Is there a screen that shows this? My JDev is reporting that the soa server does not exist, though the WebLogic administrator shows that it's there.
    I have checked the AdminServer.log and the soa_server1.log files and found nothing that would indicate an error. I also noticed there is something called a Work Manager. wm/SOAWorkManager This guy is pointing to just the soa server.

  • How to configure soa manager in ecc 6.0

    Dear Experts ,
    now i faced one problem in my server
    when i execute soamanager, my web page is giving error message ( displayed but it shows timed_out error )
    i have doubt in my comfiguration so please let me how can i configure soa manager
    Regards

    Hi
    Are you getting the "Timed Out Error" as soon as you open SOAMANAGER or when you try to Test your WSDL?
    Follow these steps-
    (I) Checking Domain name of WSDL
    a) Open SOAMANAGER and navigate to "Business Administration" tab.
    b) Click on "Web Service Administration" link
    c) In "Search Pattern" search for your Webservice and click on "GO".
    d) Select the line and click "Apply Selection" button
    e) The details of your service definition is displayed. Click on "Open WSDL document for selected binding" link.
    f) Copy the URL. Make a special note of your domain Name. Eg: "http://xxxxx.com:"
    (II) Checking J2EE setting in SOAMANAGER
    a) Go back to your SOAMANAGER home page by clicking "Back" link.
    b) Select "Technical Configuration" Tab and click on "System Global Settings".
    c ) Select "Access Information J2EE server" Tab and note down your J2EE host settings.
    Note: If there are no J2EE host settings, then you probably get them from your BASIS team. Once you get the details, save the host settings.
    (III) Clearing the WSDL Port Type error
    a) Follow steps (a) thru (d) in Part I and click on 3rd link- "Open Web Service navigator for selected binding".
    b) Now your WS Navigator is open. Your work starts here. Provide the WSDL URL from Part (I).f step when asked for "Enter the WSDL URL of the Web service:". Click "Next" button.
    Possible outcomes-
    i) Overview page of your Webservice is seen. In this case you can click on "Test" link on top and continue ... OR
    ii) You get a error page namely-
    Cannot download WSDL from http://xxxx.com:Port#.
    If this is the case, then you need to provide the domain name noted down in PART I- step (f). and hit <Enter> This will open up the Overview page of your Webservice!

  • How to configure modem and connect internet and play mp3

    Hello friends
    I am using sun solaris 8 intel edition .
    I am using windowsXP,RedHat Linux and Sun Solaris 8 Intel Editon. I am using Internet on windows and linux platform but i cannot find any device configure tool in solaris 8 , So Please tell me how to configure modem and commands for connection internet and It is possible to play mp3 songs on solaris
    Thaking in Advance
    Piyush Patel
    PI Solution

    Look at the manual for pppd. Also take a look at OSS for sound card support (http://www.opensound.com) and xmms for your MP3 audio (http://www.xmms.org)

  • How to configure Dynamic Data Connection for Business View

    Hi,
    How can we configure Dynamic Data connection that we can save the profile of the connection to somewhere that we do not need to enter it everytime when we refresh the report?
    thanks and regards
    nora

    Hi James,
    Thanks for the reply. Its solved now. For anybody if interested you can set the dynamic email address either i) having it as part of payload - In this case use the xpath to query the payload varaible ii) use identity service - follow the following steps
    1.Create a user in Application enterprise manager/also you can use a existing account, if u are creating a new one assign the correct role
    2. In either case edit the user-properties.xml(bpel/system/services/config) file for the corresponding user and add an attribute called email
    3. Bounce the server for this changes to take effect
    4. In the notification properties in the to address use ids:getUserProperty and pass the attribute name

  • Using SQL instances - how to configure the db connection

    WCI 10.3.0
    We changed the DB server, and instead of a regular SQL server using the 1433 port, we are using an instance
    SQLSERVER1\_SQLINSTANCE1
    The problem is that, in this case, the port is dynamic allocated.
    The question is:
    How I configure this in Webcenter Interaction? Anyone experienced this kind of Db migration?
    Thanks!
    Val

    WCI requires use of a static port. You can assign a static port to your named instance.
    Make sure TCP/IP is enabled, as sometimes only named pipes is turned on.
    Then for WCI use the hostname and port you specify. You can do this in the configuration manager.

  • How to configure jdbc/jndi connection in crystal report 10

    Post Author: effy
    CA Forum: Data Connectivity and SQL
    i have tried to configure jdbc/jndi connection , i have both
    drivers  data base side and  crystal report side but i
    can't  configure it.  so please help if u know
    something. 

    Sorry, but I'm not on a home pc, I'm working on a virtualized pc with a long chain of permissions ... so I cannot simply download and run an utility...
    Instead... I think (I WAS thinking) someone from SAP can tell me this info ... Probably I'll buy a paid assistance ticket... But really it's a strange thing that a simply connection from a (so) paid software need a so difficult problem solving routine..
    I edited my environment variales: JAVA, PATH; CLASSPATH; JAVA_DIR, and a long list of others ... to ALL point to ALL of directory containing used jars...
    .. I asked my SysAdmin to edit CrConfig.xml and it's done ... classpath are rights, jdbc infos are also ok, ...
    .. but none ...

  • How to configure SOA Suite 11g Worklist with LDAP Identity Store

    Hi
    Im trying to configure the worklistapp to use an ldap identity store (SOA Suite 11g)
    The ldap is a open source ldap (Open DS in this case), is NOT : OID, OVD, Active Directory, WLS OVD, IPlanet.
    for doing so, i did the next configurations:
    workflow-identity-config.xml
    <configuration realmName="realm1">
    <provider providerType="JPS" name="JpsProvider" service="Identity">
    <property name="jpsContextName" value="worklist" />
    </provider>
    </configuration>
    jps-config.xml
    <?xml version="1.0" encoding="UTF-8" standalone='yes'?>
    <jpsConfig xmlns="http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd" schema-major-version="11" schema-minor-version="1">
         <!-- This property is for jaas mode. Possible values are "off", "doas" and "doasprivileged" -->
         <property name="oracle.security.jps.jaas.mode" value="off"/>
         <property name="custom.provider" value="true"/>
    <serviceProviders>
    <serviceProvider type="IDENTITY_STORE" name="idstore.ldap.provider" class="oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider">
    <description>LDAP-based IdentityStore Provider</description>
    </serviceProvider>
    </serviceProviders>
    <serviceInstances>
              <serviceInstance name="idstore.ldap.opends" provider="idstore.ldap.provider">
                   <property name="java.naming.factory.initial" value="com.sun.jndi.ldap.LdapCtxFactory"/>
                   <property name="idstore.type" value="CUSTOM"/>
                   <property name="ldap.url" value="ldap://host:port"/>
                   <property name="subscriber.name" value="dc=company,dc=com"/>
                   <property name="search.type" value="SIMPLE"/>
                   <property name="security.principal" value="cn=adminuser,dc=company,dc=com"/>
                   <property name="security.credential" value="!adminuser_password"/>
                   <property name="user.login.attr" value="cn"/>
                   <property name="username.attr" value="cn"/>               
                   <property name="groupname.attr" value="cn"/>
                   <extendedProperty>
                        <name>group.mandatory.attrs</name>
                        <values>
                             <value>cn</value>
                             <value>objectClass</value>
                        </values>
                   </extendedProperty>
                   <extendedProperty>
                        <name>group.object.classes</name>
                        <values>
                             <value>top</value>
                             <value>groupOfUniqueNames</value>
                        </values>
                   </extendedProperty>
                   <extendedProperty>
                        <name>group.filter.object.classes</name>
                        <values>
                             <value>groupOfUniqueNames</value>
                        </values>
                   </extendedProperty>
                   <extendedProperty>
                        <name>group.member.attrs</name>
                        <values>
                             <value>uniqueMember</value>
                        </values>
                   </extendedProperty>
                   <extendedProperty>
                        <name>group.search.bases</name>
                        <values>
                             <value>o=groups,dc=company,dc=com</value>
                        </values>
                   </extendedProperty>
                   <extendedProperty>
                        <name>user.mandatory.attrs</name>
                        <values>
                             <value>cn</value>
                             <value>objectClass</value>
                             <value>sn</value>
                        </values>
                   </extendedProperty>
                   <extendedProperty>
                        <name>user.object.classes</name>
                        <values>
                             <value>organizationalPerson</value>
                             <value>person</value>
                             <value>inetOrgPerson</value>
                             <value>top</value>
                        </values>
                   </extendedProperty>
                   <extendedProperty>
                        <name>user.filter.object.classes</name>
                        <values>
                             <value>inetOrgPerson</value>
                        </values>
                   </extendedProperty>
                   <extendedProperty>
                        <name>user.search.bases</name>
                        <values>
                             <value>o=users,dc=company,dc=com</value>
                        </values>
                   </extendedProperty>
              </serviceInstance>
         </serviceInstances>
    <jpsContexts default="default">
    <jpsContext name="worklist">
    <serviceInstanceRef ref="credstore"/>
    <serviceInstanceRef ref="keystore"/>
    <serviceInstanceRef ref="policystore.xml"/>
    <serviceInstanceRef ref="audit"/>
    <serviceInstanceRef ref="idstore.ldap.opends"/>
    </jpsContext>
    </jpsContexts>
    </jpsConfig>
    but i get the error:
    Jul 2, 2009 12:52:40 PM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getIdentityStoreFactory
    WARNING: The identity store factory name is not configured.
    Jul 2, 2009 12:52:40 PM oracle.bpel.services.common.ServicesLogger __logException
    SEVERE: <.> Error in authenticating user.
    Error in authenticating and creating a workflow context for user realm1/user1.
    Verify that the user credentials and identity service configurations are correct.
    ORABPEL-30501
    Error in authenticating user.
    Error in authenticating and creating a workflow context for user sigfe.com/user1.
    Verify that the user credentials and identity service configurations are correct.
    at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:603)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    So, anyone knows how i can specify the identity store factory?
    or the correct parameters for a ldap identity store repository?
    I used the 11G documentation for the security file :
    http://download.oracle.com/docs/cd/E12839_01/core.1111/e10043/jpsprops.htm
    thanks

    I am having exactly the same issue. Once I configure jps-config.xml file to use my custom authenticator and login into the worklist app, the following gets thrown. I was wondering if you need map some roles to the existing users in the Custom Authenticator.
    Exception
    exception.70692.type: error
    exception.70692.severity: 2
    exception.70692.name: Error while granting BPMOrganizationAdmin role to SOAOperator.
    exception.70692.description: Error occured while granting the application role BPMOrganizationAdmin to application role SOAOperator.
    exception.70692.fix: In the policy store, please add SOAOperator role as a member of BPMOrganizationAdmin role, if it is not already present.

  • How to configure OAM to connect to OVD?

    Hi folks,
    I have two OAM/OAS pairs both connected to replicated Sun Dir Servers, so that the first OAS/OIS pair is connected to Sun Dir-1, while the second OAS/OIS pair is connected to Sun Dir-2. It works fine. I've recently created two OVD servers each pointing to the two Sun Dir servers. How do I re-configure OAM (OIS, OAS, WebPass, WebGate, Policy Manager, etc) to use the OVDs instead of individ Sun Servers? I get an error about DS not found from OAM whenever I try to point to OVD. Do I need to load OAM schema/user data into OVDs?
    Thank you, Roman

    Hi,
    Can you try/check the following -
    1. Value of 'LDAPMaxNoOfRetries' in globalparams.xml? Generally, this should be 'No.of Directory Profiles + 1'. Restart the OIS.
    2. under the o=oblix node,
    -> Web Masters (cn=web masters, o=oblix, ...)
    -> Directory Administrators (cn=directory administrators, o=oblix, ...)
    Reconfirm if the 'master admin' user's DN is correct.
    3. Regenerate Shared Secret.
    If these doesn't work, try -
    1. Add another user's 'dn' under 'cn=Web Masters,o=oblix,<realm>' and 'cn=Master Web Resource Admins,obapp=PSC,o=oblix,<relam>'
    Eg: obuniquememberStr = uid=pramod,<realm>
    2. Remove/Delete the 'dn' of the admin user with which the problem is/was occuring.
    Eg: uid=oamadmin,ou=users,<realm>
    3. Add the 'dn' of the admin user again.
    Eg: uid=oamadmin,ou=users,<realm>
    4. Restart LDAP Server, OAM Identity & Access Servers, and Web Servers.
    -- Pramod Aravind

  • How to configure port to connect switch SG300 to 3com switch

    Hello,
    I need help. I have my network with severals SG300 switches.
    I have one of them like my core switch working in layer 3 mode. With 2 vlans and vlan interfaces to each vlan.
    Everything is working ok.
    But now i have to connect one 3com unmanage switch that have host from vlan 1 and 2. How should i connect this switch to my Cisco sg300 switch? What mode should i use in that port?
    thanks a lot.
    SG300 L3 Switch
             I
             I
    SG300 L2 switch
             I
             I<-------- How should i configure this connection to support all vlans.
             I
    3com unmanage switch
             I          I
             I          I
             I        vlan 1
         vlan2

    Use MAC-based VLANs on SG300 L2 switch, register all clients in needed VLANs (or better setup SG300 L2 port to 3com in PVID VLAN with maximum clients and others in MAC-based VLANs).

  • How to configure IPAD to connect Wireless (WPA2)

    Hi Expert,
           I've problem that I cannot configure IPAD connect Wireless LAN (Auth   WPA2)  so I don't know How I have to configure anything on  Wireless Controller or I've to configure anything on IPAD. Please advise me sir.
    Best Regards
    Peera

    Hi,
    As I understood , you need configuration on controller side ...  if that is the case... please follow below procedure ..
    once you login to controller through GUI ... you need to select " Wireless " option
    1) select wlan which you want to configure with WPA2 ...
    2) you will get page with all details about corrousponding WLAN
    3) select " Security " option in wlan option
    4) once you click on security option , you will get option with WPA+ WPA2
    5) select that option with what type of encryption you required ...
    I believe you need wpa2 with personal edition. if so ... please select PSK with TKIP option .
    once you do that , it will be activated from controller side for the respective Wlan ...
    About IPAD ... you need to select wpa+wpa2 with psk and TKIP .... I do not have clear idea about IPAD ...

  • How to configure OracleXEClient to connect to OracleXE?

    Oracle Database 10g Release 2 (10.2.0.1) Express Edition for Microsoft Windows
    http://www.oracle.com/technology/software/products/database/xe/htdocs/102xewinsoft.html
    I download OracleXE.exe (157MB) and OracleXEClient.exe (29.5MB)
    I installed OracleXE and it works well.
    After I installed OracleXEClient, click on [Start], Programs, Oracle Client 10g Express Edition, Run SQL Command Line
    I wish to connect to sys by typing (my password for sys is ora10g_manager):
    connect sys/ora10g_manager@xe as sysdba
    and the error is as follows:
    ERROR:
    ORA-12154: TNS:could not resolve the connect identifier specified
    Since I have also installed Oracle Develioper Suite 10g R2 on a separate ORACLE_HOME. I add XE by setting the tnsmaes.ora in ORACLE_HOME\NETWORK\ADMIN\tnsnames.ora
    XE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = XE)
    I click on [Start], Programs, Oracle Client 10g Express Edition, Run SQL Command Line, enter
    connect sys/ora10g_manager@xe as sysdba
    and it connects suffessfully.
    My question is if a user installed Oracle XE and Oracle XE Client but no other Oracle products in other ORACLE_HOME, how can one configure Oracle XE Client to connect to Oracle XE Database?

    1. Create a new user Variable called “TNS_ADMIN”
    Assume ORACLE_HOME of XE is in C:\oracle\product\oraclexe
    Since when you install Oracle 10g Express Edition, a tnsnames.ora file has already been created for you in C:\oracle\product\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\tnsnames.ora
    •Either set TNS_ADMIN in DOS prompt or in a New User Variable
    You can set TNS_ADMIN to your local path of Oracle Express Database
    set TNS_ADMIN= C:\oracle\product\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\tnsnames.ora
    or you can copy tnsnames.ora from C:\oracle\product\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\tnsnames.ora to C:\oracle\product\XEClient, and set TNS_ADMIN in the User Variable
    Click on [Start], Programs, Oracle Client 10g Express Edition, Run SQL Command Line
    SQL> connect sys/ora10g_manager@xe as sysdba
    Other ways to connect to Oracle Express in DOS prompt
    Method 1: Set TNS_ADMIN in DOS prompt
    In DOS prompt,
    C:\> set TNS_ADMIN=C:\oracle\product\XEClient
    C:\> C:\oracle\product\XEClient\bin\sqlplus.exe /nolog
    SQL> connect sys/ora10g_manager@XE as sysdba
    Method 2: No need to set TNS_ADMIN in DOS prompt but enter the full connection string in one line of DOS command
    Set NLS_LANG in DOS Prompt
    C:\>set NLS_LANG=English
    Enter the following DOS command all in ONE line
    C:\>sqlplus "sys/ora10g_manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=XE))) as sysdba"

  • How to configure optimal data connections to allow excel to retrieve multiple data sets form a single data source

    Hi all,
    I would like to have a data connection file used by excel to extract data form a SQL Server DB (so that change in location of the DB needs only a change to the  single data connection file). The excel file will retrieve data from only a single database,
    but there are multiple queries (30+) stored on SQL server that are used - each SQL server views' data is returned to a pivot table in an excel worksheet, which has an associated chart with various slicers on the main dashboard worksheet.
    Do I need a seperate data conenction file for each SQL server query being retrieved, or can a single connection file be created as all data comes from a single database?
    (all my attempts and research on the net have led me to believe that a seperate file is needed for each view, but this seems unnecessary)

    Hi, im learning my way with this, so apologies if I am providing too much or too little info.
    There are 8 source files which are very loosely related in that they capture infromation regarding what has happened within a metro railway over a day. However there are only a few relationships between the contents of tehse files.
    These tables are imported into SQL Server using SSIS where I have developed a number of views that query these 8 source tables to generate a number of metrics to provide insight into the service provided to the passengers. Some examples of metrics are: Number
    of passengers in transit at any given time, time taken to travel between adjacent stations, how much power was used during the day, what distance did the trains travel during the day, etc. Some views provide only a handful of rows, some provide 1M plus. There
    are now approx 40 seperate views created.
    I have then used a spreadsheet with a worksheet associated with each SQL server view. Each worksheet is set up as a pivot table, which allows the related chart on the main dashboard worksheet to use standard excel capability to slice and present the data
    in different ways.
    At the moment if the server on which teh database is stored moves, I have had to recreate the spreadsheet from scratch as I dont know how to change the connection information in any other way. Ideally I would like to have connection info in a single place
    to reduce ongoing maintenance, particularly as I would like to place the spreadsheet on a SharePoint server to distribute it to other users.
    Thanks

  • How to configure Remote desktop connection double sign-on?

    All dear,
    I need help. I install a terminal server 2012, but when I try to remote login, only once sign on. How can I to configure the server to double sign-on.
    Thanks

    If I understand you right you have custom credential provider on the server. In this case Microsoft says that it is impossible to overcome double sign-on, just search for the "RDC and Custom Credential Providers" on the Internet.

Maybe you are looking for