How to configure Solaris that third-party software can use Netscape

Hi,
I don't know if this is Solaris configuration issue.
I have Storage Foundation installed on Solaris 10 SPARC.
And I am using the VEA GUI application to manage storage. Then I intentionally made some activities that the Error window appears with the link.
This link point to the Veritas web page.
After clicking on this link the error appears:
"Error attempting to launch web browser.:
netscape: not found"
Please tell me whether this issue is because it needs some changes in Solaris or maybe the Storage Foundation needs to be configured properly?
The internet connection works fine while executing the Netscape from CDE.
Kind regards,
Daniel

I don't think it has anything to do with the third-party software. When you click on a link or document, the OS tries to access it using the associated application. In your case, clicking on a hyperlink tries to load the default web browser which on your system is Netscape.
If say, you installed Firefox and configured it to be the default web browser then Solaris would launch it instead.
Try to manually launch Netscape and in the preferences, set it as the default web browser. See how you go with that.
Cheers,
Erick Ramirez
Melbourne, Australia

Similar Messages

How to configure a new third party sales document type?

Hi SAP SD gurus,
I am new to the SAP world, I need your help in configuring a new third party sales document type for a site.
There are existing third party document types being used in the region, but the client wants an entirely new third party document type that is activated for CREDIT MANAGEMENT.
I just need your inputs, as how to go about it. If I copy from an existing third party sales doc. What additional steps do I need to follow? Like Item category config, copy control settings, and credit management.
Is there a need to create new billing types?
Also as per process, by creating a new document type, how will it affect the logistic processes, if any?
Thanks a lot in advance for your valuable inputs.

Hello,
You can create new document type under following customization path
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Define Sales Document Types
Now create new document type by copying the standard document type OR
Now go to
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Define Item Categories
which is already defined for third party sales (TAS)
Now assign this iteme category to your new document type
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Assign Item Categories
Assignment needs to be done in combination of sales document type and item category group (BANS)
Now
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Schedule Lines
Assignment of schedule line is already done as you are using the standard one.
Lastly, you may need to maintain copy control for your newly created sales document type for this go to
SPRO>>Sales and Distribution>>Sales>>Maintain Copy Control for Sales Documents
(Copying Control: Sales Document to Sales Document)
Here you can define copy control requirements.
BR,
Tushar

How do you remove a third party software update on Lion?

A friend recently pulled an update to Microsoft Remote Desktop Connection Client for Mac 2.1.1. The update version is 3.6.2. Consequently, RDP does not work when connecting to a Windows machine remotely.
NOTE: I realize Microsoft Remote Desktop Connection Client for Mac 2.1.1 is no longer supported for OSX Lion and later. However, I use this same client successfully on a 2009 Intel MBP upgraded to Mountain Lion. I did NOT pull this third party software update and RDP works without fail.
Troubleshooting steps to date:
Attempted Uninstall/reinstall of RDP.
Failed.
My goal is to "roll back" this specific application prior to the software update without having to restore OSX.
Please help locate the specifc program files to be removed. I'm willing to remove manually through Terminal with the right instruction.
Thanks!

This link will help you uninstall, http://support.apple.com/kb/ht2577
This is the download for the 2.1 version. http://www.microsoft.com/en-us/download/details.aspx?id=18140

What third party softwares can get me past my passcode?

My friends got into my phone and changed my password. It has been disabled multiple times and i do not want ot attempt again. I have photos that are on my phone that I need to keep and they are not backed up. Are there any safe third-party softwares I can use to get past this passcode?

NO there are no 3rd party software.

SCCM 2012 R2 how to configure SCUP for third party patches

we have CAS and primary site servers need to configure SCUP
what need to be configure in CAS and what in primary.

Here's a good guide to get you started :
http://blog.coretech.dk/wp-content/uploads/The-complete-guide-to-System-Center-Updates-Publisher-2011-V1.01.pdf
Benoit Lecours | Blog: System Center Dudes

I want to change my primary email to my most current email but it keeps saying there is already an apple ID for that email, how do I delete that one so I can use all of my old information, just with my most current email address?

I created the apple ID that I currently have about 6 years ago and I want to change my primary email from my childish one to my most current email that I constantly use, but I think I accidentally created an apple ID with that email, I want to delete that apple ID so that I can just plug my new email in with all of my old information (that is still the same). I am so lost

I don't believe Apple lets you delete old accounts. They also will not let you merge them.

When installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?

when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall? Is it necessary on a Mac to do so? I come from the Windows world and am still in the learning curve on the Mac.

Correct. I have not installed ANY other software for anti-virus, etc. I want to install a Synch app for my HTC phone to sych with MS Outlook 2011 installed on my Mac. HTC will not synch with it otherwise. That was really the basis for my question....if installing a non Apple app can be done without messing with factory settings on the Mac. In Windows I remember that I needed to disable Norton and the Firewall in order for installation to occur.
Thanks.

I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken. Any suggestions on a very reliable on that is 2TB or a third party software that is compatable with the need I describe?

I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken. Any suggestions on a very reliable one that is 2TB or a third party software that is compatable with the need I describe?

How much of a hurry are you in, and are you considering upgrading to Lion?
File Vault on Snow Leopard only encrypts home folders you select, and doesn't work well with Time Machine.
But Lion will have "full disk encryption" of local or external disks. See File Vault 2 here: http://www.apple.com/macosx/whats-new/features.html

How to link third party software with labview program ?

I have designed a labview
program to analyse and make
graph and save the datas
from the photon counter using
ni USB DAQ 6008. And the
photon counter is controlled
by the third party software with
itself. both programs are
executing successfully. But
my task is run both the
program at the same time. i.e.
link the third party software
with my labview program.
How to i do this?

Your question is too vague since you give no information as to this third party application. Is it an application you wrote? Is it an application that you cannot change? Does it have a programming interface? Can you eliminate this third-party application and control the photon counter yourself? Have you tried to do a search, as this question has come up before many times. For example:
http://forums.ni.com/t5/LabVIEW/how-do-I-use-labview-to-control-other-programs/m-p/424765
http://forums.ni.com/t5/LabVIEW/How-to-operate-another-application-s-GUI-from-LV/m-p/668088

How can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

I think you are using the wrong terminology. You can browse the hidden share of any pc if you know the ip and have a valid user account on the pc by typing in the following \\computername\c$ or \\ipaddress\c$ . It should prompt you for a user account. You may have to allow this through the windows firewall (or disable it completely).

How to streaming data/image from labview to a third party software

Hi, i am working on a research project and stuck on the following problem: I have two cameras and one IMU Sensor unit, all conected to my PC. I save the camera images as avi format and the IMU sensor as TDMS format. I have also another software running on the same PC which i developed using VisualStudio2013. On this software i alredy implemented a very complex filter to fuse images and IMU. Now my quesion: would be it possibel to stream the .avi and .tdms from LabView to my software so I can test in real time how my filter is performing? If yes please let me know what LabView function do i have to use. thanks

Thanks, the hardware are my PC, 2 usb cameras and one usb-IMU sensor. The PC runs w7 with LabView2014. I can read the camera and IMU to my Laview without any problem and save the data on my hard desk. I am also developing another software on VS-C++ for image processing and data fusion. I would like to know what is the best (and fastest) possibility to stream this data (Images and IMU) in real time from LabView to my own software?
I read a lot in NI-website on how to communicate LabView with a third party software. They are summarized in this link:
https://decibel.ni.com/content/docs/DOC-9131
It looks for me that the ‘shard memory’ principle (or File Mapping) is the most convenient method. In VC++ under windows I can easily handle shared memory by calling FileMapping windows functions. Now the question is how can I do that in LabView? I am relatively new in LabView and do not know if it is possible to use shared memory in LabView. For example: is it possible in LabView to buffer both video streams and IMU-data (live) in a shared memory in computer RAM using the windows FileMaping functions (may be using .dll). Then I can access the RAM form my own software and read the stream. Please see the attachment for more description.
Attachments:
Unbenannt.PNG ‏139 KB

How can I browse third party software

I have spent the past hour trying to locate a listing of Third Part Software (Applications) presently on the Apple website. In addition, there seems to be "Community" whereby this can be addressed or at least nothing containing Software or Applications or any other similar name. I DO NOT want to have to activate iTunes as this would seem to indicate that I wanted to buy something but since all I am presently doing is RESEARCH into what is capabilities, all i really need is software titles to see if I can discover anything that even close to what I am looking for and usually that is ONLY available on the developers website.
Can this be done? HOW?
Sparkgapper

Sparkgapper wrote:
I DO NOT want to have to activate iTunes
What do you mean?
I have spent the past hour trying to locate a listing of Third Part Software (Applications) presently on the Apple website.
If, by "Apple website" you mean the Mac App Store, AFAIK there is no such listing. However, you can go to
<http://itunes.apple.com/us/genre/mac/id39?mt=12>
and then browse the apps on offer by category -- no need to 'activate' anything. Whether there is or not a way of querying exclusively for third-party software, I don't know.
If you're looking for a listing of all Mac OS X third-party software in the world, there is no such thing. But, if you're looking for sites which list Mac software, here are a few suggestions:
<http://www.macupdate.com/> (is, IMHO, the best of the lot)
<http://download.cnet.com/mac/> (used to be quite good as VersionTracker; but it's gone downhill since acquired by CNET/CBS)
<http://mac.softpedia.com/>
<http://en.softonic.com/mac>

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

Duplicate post.

How do I make a blu ray DVD on my iMac. I bought Toast and I have Verbatim BD-R recordable discs.The site says I also need third party software to do this....which one and what kind???

How do I make a blu ray DVD on my iMac? I have purchased TOAST and the blu ray discs, but now I find I need a third party software to do this? What kind or which software???

Have no BD-Burner - but I think I tried to Save as a DiskImage of full movie in BD-Quality
Roxio says:
Drag, drop, burn
Drag, drop, burn
Toast 11 is the easiest and fastest way to burn your music, video, photo and data files on to CD, DVD or Blu-ray Disc™ for both Mac and PC. Archive up to 50 GB on high capacity Blu-ray Discs.
Indicates to me that a full BD-movie could be burned as this.
Yours Bengt W

How to publish pages made in third party software

On my "homepage" websites I can upload html pages created by third party software (Adobe GoLive CS2 in my case) onto my .Mac sites.
I can't find anything in iWeb about publishing custom-made webpages in iWeb and/or on the iWeb. Is this possible with iWeb? Or do I have to stick with the old way of doing things (creating new .Mac sites online and uploading my custom pages there)?

Well, I half-answered my own question here. I went into my iDisk folder, went to Web, Sites, iWeb, then chose the site I had created and put my own custom-built html page there. It uploaded automatically and now I can access it via the web without a problem. It shows up the way it's supposed to look as well.
So basically I can load them up, but there's not a way for me to fully integrate them with the other iWeb pages on that site. My custom page does not appear in the iWeb application under the site name, I can't add web counters to it, etc...

How to configure Solaris that third-party software can use Netscape

Similar Messages

Maybe you are looking for