How to Configure Table Graphics in SAP CRM 7.0

Dear all,
What is the main use of Table Graphics and How can we configure table graphics functionality in SAP CRM 7.0.
Kindly suggest in case any best practice documentation or other configuration document is available
Your help will be highly appreciated
Best regards
Raghu ram

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

Similar Messages

How to enable net value in sap crm opportunity

hello all ,
how to enable net value in sap crm opportunity and item category.
please help me out i am new in sap crm
Ahmad

Hi Ali,
Every transaction which you create have some predefined rule in the form of procedure which is attached in the transaction level. You can follow below path and check for the transaction which are the rule maintained.
CRM->Basic setting-> Define transaction types.
Search for your transaction type and double link in order to see all the rules attached to transaction level.
You also need to define which item categories you wanted to configure for particular transaction type which you all ready have done it seems.
You also need to define pricing procedure to the transaction where you need to checked for errors.
Below is the path
CRM->Basic setting-> Define transaction type-> open your transaction
step 2:click on assignment of business transaction categories than select category as Sales
than click on Customizing Header option to see attached pricing procedure with it.here you need to check for your error.
to check partner determination rule please follow below path in SPRO. -> partner determination procedure
Check in head of transaction which partner procedure is attached.
Than search for partner determination procedure in below path.
I hope this will help you to validate the setting for your transaction and will be helpful to solve your issue.
Thanks,
Prem

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to configure Pay Roll in SAP

Dear Gurus,
How to configure Pay Roll in SAP. Pls suggest.
Regards
Pankaj
Please have a look at the forum search

Define Employee Sub Group Grouping for PCR and CAP / Check Payscale Area / Check Payscale Type / Check Assignment of Pay Scale Structure to Enterprise Structure / TARIF Feature / Create Control Record / Revise Payscale groups and levels / Create Wage type catalog / Employee Subgroup Grouping for primary wage types / Personnel Subarea Grouping for Primary Wage Type / Setup Payroll Period for Collective Agreement Provision / Check wage type group Basic pay / Define wage type permissibility for each PS and ESG / Check wage type characteristics / Maintain Valuation of Base Wage types /
Check Wage Type Group Recurring Payments and Deductions / Check Wage Type Group Additional Payments /Check Wage Type Group Membership Fees / Membership Payee /Determine allowed payees per membership type /Define Membership / Deduction Types /Define Trust Details for Provident Fund /Maintain Contribution Details for Provident Fund ( Feature 40EPF )
Assign Company Rates for Provident Fund / Define PF Trust Validity Period / Define Contribution type for Statutory rates for Provident Fund /Maintain ESI Eligibility Limit / Define Personnel Area and Subarea Groupings for ESI /Assign ESI Groupings for Personnel Area and Subarea/
Maintain Contribution Rates for ESI/
Maintain Gratuity Trust ID/
Maintain Gratuity Contribution Frequency and related wage types/
Define Contribution Rates for Gratuity/
Maintain Superannuation Trust ID/
Maintain Superannuation Contrib. Freq and Rel. Wage Types/
Define Contribution Rates for Superannuation/
Maintain Loan Types/
Create Loan Conditions/
Maintain Loans Grouping (Feature 40LGR)/
Maintain Salary Components ( Feature 40LSL)/
Max. no. loans allowed (LML1)( Maximum number of loans allowed at a time)/
Max. no. loans allowed (LML2)(Maximum no of loans allowed)/
Maintain Maximum amount for loans outstanding(LMVAL)/
Maintain Loans Eligibility Checks and Limits/
Maintain Accommodation Types/
Maintain the processing options for CLA/
Define Conveyance Types/
Assign eligibility criteria for conveyance allowance/
Define Professional Tax Grouping Details/
Assign Professional Tax Groupings for Personnel Areas and Subareas/
Assign Amounts for Professional Tax Deduction/
Maintain Method and Form Layout for Professional Tax Groupings/
Define Personnel Area and Subarea Groupings for Tax/
Assign Tax Groupings for Personnel Areas and Subareas/
Define Tax Codes/
Assign Tax Code Limits to Wage Types/
Assign wagetype to wagetype group offcycle /
Set Up Off-Cycle Reasons/
Specify default values for wage types Off Cycle/
Specify Default Values for Payment Methods/
Configure wage types for Section 80/
Configure wage types for Section 88/
Define other allowance or re-imbursement type for exemption/
Define priority for deductions/
Maintain recovery of arrears/
Define cumulation types for wage types/
Assign universal contribution groupings for universal contribution types /
Assign state for universal contribution grouping/
Assign slab code and other parameters for each state of univ.type./
Assign Contribution value for each slab./
Define Period Parameters/
Define Date Modifiers/
Check Payroll Accounting Area/
Generate Payroll Periods/
Generate calendar for cummulation/
Assign Basic Wage Types to Grouping for Allowances/
Define Pay scale groupings for Allowance/
Assign Pay Scale Groupings for Allowances/
Assign wage type model for Pay scale grouping for Allowances/
Calculate Eligibility for Raps/ . ....................................................................................................................................................................................................................................................................
If you get the knowledge then please . mark the questions as answered

How to configure dba cockpit in sap solution manager

Hello colleagues,
how to configure dba cockpit in sap solution manager??
Thanks!

Hi Victor,
Please go through this doc, it might helps you.
Sap Solution Manager - Dbacockpit
Sap Solman Instguide Dba Cockpit Setup
Regards
Amit

How to configure Xl Reporter in SAP Business One

Hi
Can you please tell me the steps for how to configure xl reporter in sap b1
Regards
Sandip

Hi Sandip,
In Sap 8.8 u no need to configure or install XL reporter .
While Installing SAP 8.8 XL reporter Automatically Gets Installed
And Also check whether MS Excel 2003 installed 2003 excel supports XL reporter
U can check under Sap Menu -
>Under Tools----
>u can find XL reporter .
Hope this helps u
Regards
Jenny

How to Configuration PDC Management in SAP

Dear Gurus
Please guide me how to configuration PDC management in SAP FI.
Regards
Tapan Maity

Hello Tapan,
Your requirement is not clear. Is PDC mean Plant Data Collection?
If yes, then PFB the required link for that.
Supply Chain Management - Plant Data Collection SAP R/3 Shop Floor Control (PP-PDC)
SAP ECC - Plant Data Collection - Time, Attendance and Employee Expenditures (HR-PDC)
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S

How can we delete prospects from SAP CRM

Hello All,
How can we delete prospects from SAP CRM in back ground for a list of selected BP's.
Thanks,
Raj.

Hi Raj,
You can use tx BUPA_DEL to delete the BP's you don't need anymore.
Cheers,
Heber Olivar

How to I configure Tax functionality in SAP CRM 2007?

Dear Expert,
Kindly give me the idea of how to configure the Taxation functionality for India. This will be used to calculate the taxes applicable for Service Business.
Kindly give me some inputs to proceed further.
Awaiting your reply.
Thanks,
GJ

Object from external system is not showing the Calling system.
When i do the validate customizing check.
found that in TTE country assigned is U0. How to i change this?
when i try to assign the entries in object from external system. system not allow me to select the calling system only * symbol is coming. How do i fix this?
Check data transfer settting s give me the green result.
Expecting some one to throw me the some inputs to understand the technicality.
awaiting your input.
GJ
Edited by: GJ sap crm service on Mar 4, 2010 2:12 PM

How Microsoft access could possibly an SAP CRM table

ould anyone know if it is possible for a Microsoft access system to read an SAP table. If so, how? I have to implement an interface btw MS Access and SAP CRM and I am trying to see how to get it to work.

Dear Abdul!
There are probably many ways to achieve what you´re looking for. It heavily depends on several factors, which solution turns out to be the best for you. You should take into account security, data integrity and sensitivty, business context and system architecture, among others.
First of all though, you should specify wheter you want to access the SAP table for unidirectional read access only, or if you have the requirement to also update data in any SAP table (are you talking about a SAP standard table or a customer Z-table?)
If you´re looking for a straight forward solution for read-only access, you can create a custom Z* RFC-enabled function module that reads out your SAP table and returns the values to your calling application. You could also use the WebServices interfaces of your SAP WebApplicationServer, depending on your release level. Furthermore, kindly check, if there are standard BAPI´s available that contain the data you need in their return parameters.
Of course, you also could directly interface on a DBMS level between MS access and your underlying SAP DB, but most likely such a solution will never be supported in any productive environment, and for good reason. So you should look into one of the other options mentioned.
I´ll gladly provide more detail about any of the mentioned approaches, but would like to have a little more input about your requirements before, so the optimal solutions can be found.
Kind regards
Christoph

How to mark product mandatory in SAP CRM Opprotunity and Quotation?

Hello All,
We are using SAP CRM 4.0 and have one requirement as follows:
Through Configuration ,I am not able to find the the way to mark mandatory for the fields Product , Description,Quantity,Exp.total Value under the Products Tab for the Opportunity. Also the field product under products Tab for the Quotation.
Can this be done through Config or Technically? please provide the steps for the needful and also advise do i need to put this at header or item level?
Thanks in advance.
Cheers
Sreedhar

Hi, Sreedhar
You have to write program for Badi ORDER_SAVE or use incompleteness check.
How to maintain the fields mandatory in Opportunity and quotation SAP CRM?
making activity reason as incompleteness field
Denis.

How to update marketing attributes in sap crm 7.0

hi sap gurus,
I want to understand how to update the marketing attributes in sap crm, basically I want the logic to update the marketing attributes in the system. which tables I should verify & then I need to write an abap program to update/modify the marketing attributes.I know the beginning validations, the bu_group =zul1-outlet master from but000 table , after that I am stuck up with the logic. I know the field which I need to update: in table cabnt, atinn field.
Edited by: packframe2585 on Feb 23, 2012 7:47 AM

Hi,
i´m using FM CRM_MKTBP_MAINTAIN_OW. But this is also not very good from a performance point of view.
Kind regards
Manfred

How to handle special character in SAP CRM

Hi all,
I am facing a problem on SAP CRM Web UI - Contact Creation - When a special character is inserted on address fields of Business
Partner (e.g. ` ~ ^ etc.), the interface does not understand this character and changes it to a TRIANGLE on pressing enter key.
Kindly guide as how to handle it or something is missing in terms of (note or patch).
I am running on SAP CRM 7.0
Thanks,
Pradeep Singh Dhadwal

Hi Pradeep.
At the end of the day, a character is stored as a byte sequence on disk, and a code page defines the mapping between the byte sequence and any given character.The code page determines what character you can see and enter, therefore different code pages map different characters to the same byte sequence.
I suggest you to first check if your system is a Unicode system by checking the System menu->Status option->Unicode system field. I'll assume it is.
Then, please run report RSCP0018 (optionally also RSCPINST and then select Current NLS config pushbutton).
These reports will show you the actual configuration of languages and code pages of your Application Server. Please check that the correct languages and code pages are configured. If you need to know more about code pages configuration, please check Note 42305, which explains pretty well the whole process.
Kind regards, and good luck.
Federico

How to create table in the sap script

Hi,
How to create a table in the sap script layout, i Have to use table in the main window with 7 columns. can any one send sample code.
How to calculate the number of line items which are displaying in the main window, if the number of line items are exceed in the main window then the amount has to be calculate and print as "BALANCE FORWARD" and the next page had to be displayed as "CARRY FORWARD" that amount. if this is the last page not subsequent page the amount had to be calculated the carry forward amount and total amount and print as "TOTAL AMOUNT". i am creating the new layout and the program is the standrad driver program i have to use and i have to use the standard Text elements only, can any one help me on this issue

hi
good
there is no "pattern" option in SAPscript. All you have at your disposal are the following SAPscript commands: BOX, POSITION and SIZE. Not only are these commands both confusing and tedious to implement, they also are limited in what they can achieve. For instance, although you can suppress a box during printout (by making it conditional), there is no simple way to adjust it dynamically instead. Thus, to divide sequential line items, you may wish to use an underline (ULINE) or simply white space.
thanks
mrutyun

How to configure Mail Alerts in SAP R/3 System.

Hi,
I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
Regards,
Kiran.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

How to Configure Table Graphics in SAP CRM 7.0

Similar Messages

Maybe you are looking for