How to configure the bios of the big bang marshal p67 (help)

Good afternoon people I'm new here, I hope to be posting in the correct forum, and come on, I recently bought a Big Bang Marshal P67 B3, I'm using a vcore [email protected] to 1:42 daily and a kit of 2200MHz 2x2GB Gskill PIS, but whenever I play the machine locks up and has the blue screen, I'd love your help on all the settings I need to do to leave my bios over 100% stable.
Thanks in advance for help.

Quote from: HU16E on 04-August-11, 11:28:03
Right click 'Computer', then left click 'Properties', 'Advanced system settings', 'Startup and Recovery' 'Settings', uncheck 'Automatically resart'.
Disabled.
Thanks buddy, now I found.
I'll take and post all the screens of my bios, if possible tell me if you configured everything right or if I need to change something ok.
Every time I try to run prime95 linx or just going to play, does not take long to see this screen.

Similar Messages

MSI BIG BANG MARSHAL -- UEFI-(Click-BIOS)-BETA Releases [MS-7670]

I will upload the latest available BETA Release for the BIG BANG MARSHAL mainboard: E7670IMS.113 [v1.1b3]
Changelog:
E7670IMS.100 ---> E7670IMS.113
- Fixed the system will hang in blank screen when press F11 to select UEFI DVD installing 64Bit OS issue.
- Fix DRAM Timing not match SPD value.
- Add the new BOM support.
- Improve mouse compatibility in bios setup menu.
- Change the Package C State limit item default value.
- Fix the PC Health Status show N/A issue when use the User PassWord entering the Setup.
- Fix can not entering dos mode issue when onboard lan controller set disabled.
- Fix plug 4 dimm G-Skill F3-12800CL7D boot fail when XMP enabled.
- Fix mouse click will hang 0Dh in some page when entering setup with user password.
Flash/use this release at your own risk!
For BIOS Update: >>Use the MSI HQ Forum USB flasher<<

Hey guys real quick. So after updating to the new 7670IMS>310 bios so that I may use my GTX780s, I reinstalled with windows 8. Everything was fine until I was on teamviewer just last nite and upon switcing sides my bios got corrupted. How do I know you ask? Upon getting back into windows my LANS did not work so I had not internet connection. I tried uninstalling it from Device Manager and deleting it. After a few clrmos. I thought I would switch over to the other bios and see if the LAN works and it does because of the status lights because now it lights up. So I switch back to main bios and LAN works but it would not post whatsoever and just cycles through post finally ending with a " DE ". Not sure what the new LED DEBUG codes are but if someone could post it would be nice to be able to refer to it.
Anyways on win 8, no matter what it will not let me into windows And when it looks like it will...gives me "your pc ran into problems and we are collecting data and we'll restart after" message. After a few of these wonderful messages, I decided I was going to flash my bios again. It did look like I was sucessful until after restart it did the same thing. Going through post I saw 19,15 then shuts off. Does this and ends with "DE" pc still on but nothing. No windows.
I got lucky a few times and was able to get into my bios and decided I was going back to Win 7 64......I put the good ole XFX6990 back in and got windows 7 to reinstall and continue to flash my bios to an older one. I used your method before and it work> from 3.0 back to 1.5 then from 1.5 back to 1.2 for OC purposes. So i tried that method but it looked like it just reflash it with 3.1, odd.
So after a few restarts everything seems fine, no cycles just normal. When I reboot normal process no double boots or cycles this time so I thought hey, that fixed my corrupted bios somehow. I thought I gotten lucky.... So I switch out the good old 6990 and in with my 780s. Reinstalled win 7 and upon completion of windows update. Again with the cycles of 19,15 turns off does this again over and over like 5 or 6 times and ends with "DE"
And this is where I'm at atm. I remember when I DL'd the flasher and bios. I only saw 2 files which was " VALVE CHECK AND E7670IMS.310".
When I tried to do it again with the same method as the first I have "
#BIOS
#BK_6.Z7
#EFIFLASH
#MSIHQ(icon)
#MSIHQ_INFO
#MT420"
This time it does not go through the same when flashing, just tells me bios update complete. I've done this a million times and all have been successful.
Basically I'm still on 3.1 bios but I 'm curious as what other methods do you suggest I try now? I have left everything alone after reinstalling windows and updates. Everything seems okay, reboots fine no cycles and still get the random hit or miss with 15,19 turns off cycles and ends with "DE". Would like to get a resolution if possible. Thank you and I know I said real quick right, but really. Thanks for any help.
I'm going nuts!!

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to configure the mail in Sales Support of SAP SD

Hi,
Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
company. For this every time we are changing the sold to party in quotation and taking printouts then
sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
once to our 300 users may i know about how to configure the mail for this scenario.
Thanks and Regards
MH

Hi Prashant,
Thanks for you immediate responce, Can you give me the configuration steps in detail.
Thanks and Regards,
MH

How to configure the JMS application in WSAD 5.0

hi
i need to configure an JMS application in WSAD 5, but while configuring the application i am checked with intial context exception. but i have configured the jndi in the server. but i cant able to run the application.
can anybody help me like how to configure the JMS application in WSAD (can we configure it without MQ simulator if yes i need the steps)
thanks in advance

Hi,
did you check the WebSphere documentation or ask a question on an IBM forum?
Frank

In Exports sales process, how you configure the Duty Draw Back

in my case
we r creating Exports but
duty unavailability of time and time taking process in export processing
we are creating Excise invoice and cenvat is debited .
now we r asking the govt. for the duty draw back for the value already cenvat is debited with proper documents like ARE1 etc.
how to manage this duty back and what r the replications or changes thereafter
thanks in advance

Hi Sunitha,
Pls can u explain how did u solve (In Exports sales process, how you configure the Duty Draw Back) this issue....since i don't have idea abt this...but shortly i am going to do this in my client place....
thanks,

Can anybody explain how to configure the Centralized contract in SRM 7

Hi All,
Can anybody explain how to configure the Centralized contract management in SRM 7 with ECC EHP4 ?what are all that need to be perform in PI system.
Thank you,
praveen

Hello,
PI will be required here. You can also refer the config guides maintained at the belwo mentioned location.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 -> Configuration Guides for SAP SRM 7.0
Best Regards,
Rahul

How to configure the email in SAP

Hi Experts,
Can you please let me know how to configure the email in the server?
Thanks in Advance
Regards,
Kuldeep Verma

Hello Indu Rayepudi ..
I have followed the Recommendations and everything is going well but I can only send emails from the same domain, how can I set up to send to hotmail, gmail, yahoo?
Mi sap es SAP ECC 6.0
The administrator said that the Exchange server already has registered the server's ip sap to enable him to relay this IP.
But nothing happens.
Do you have any idea? any help from you, I would greatly appreciate .. Gina
Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
Edited by: GCH on Sep 25, 2008 11:24 PM

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

How to Configure the Blackberry Facebook Integrated Application

Hi Friends ,
How to Configure the Blackberry Facebook Integrated Application while getting the Application Id , Application Secret for Registering the App in Facebook.
Please Help me , It''s Urgent.
Thanks & Regards,
Nagarjuna Metla.
arjuna

Bonjour,
Effectivement, la valeur du filtre de la carte NI-6280 est 40kHz.
En simulant la carte, j'ai pu faire le test avec le VI joint.
Si ce VI ne fonctionne pas, quelle est le code d'erreur obtenu et à quelle fonction apparaît-il ?
Salutations,
Isabelle
Ingénieur d'applications
National Instruments France
Attachments:
filtre 6280.vi ‏73 KB

How to configure the services(WDA) in ESS with EHP7

Hi Experts,
I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with EHP7.currently we are using
ECC6.0 EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
How to configure the service in launch pad with WDA.please guide me the step by step procedure.
Please share the config guide if anyone have.

hi sap scn ,
Tips & Recommendations for customizing ESS Menu (WD ABAP) - ess launchpad
Summary of configuration options in ESS Personal Information scenario -personal information
go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
if any other revert back again

How to configure the use of WS-RM in "PI 7.11 EHP1?

How to configure the use of WS-RM in "PI 7.11 EHP1?
Currently in the editing window of the communication channel (adapter type WS), I can not see any options regarding Reliable Messaging protocol (WS-RM).
The scenario that is required is as follows.
(Consumer WS-RM) -> (Provider WS-RM PI 7.11 EHP1) -> (ABAP Proxy Backend NW 7.0)
I would greatly appreciate any help,
Thanks,
Roger.
Edited by: Roger Solano on Apr 7, 2011 10:31 PM

WS adapter supports WS Reliable Messaging. But WS adapter is used to communicate between two SAP web service runtime.
Check this blog and its links for understanding direct connection or point to point communcation using WS adapter
/people/william.li/blog/2008/02/13/point-to-point-connection-using-abap-in-sap-using-pi-71
Hoe that helps.

How to download the big file in SDN

Hi buddies,
Do you have any idea how to download the big files in SDN such as NetWeaver CE trial? I cannot download it with download tool, and if I download it by IE, after dowloading for a while, I always get "connection reset" error.
Hope you can help me.
YiNing

Yining,
There seems to be a few people making comments about problems with downloads. I myself have never had a problem, but I think that downloading from in Europ isn't a problem.
I would try and use a tool such as GetRight download manager which picks up the fact that something is downloading and manages that download, so it will be able to restart the download.
Paul

How to configure the .ini file with applet

hai
i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browser

Hi Jay SenSharma,
Thanks for your immediate response.
I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
Regards,
S.vinoth Babu

How to configure the smtp server..

i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...

This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
    private String d_email,d_password;
     * This example is for gmail, you can use any smtp server
     * @param d_email --> your gmail account e.g. [email protected]
     * @param d_password --> your gmail password
     * @param d_host --> smtp.gmail.com
     * @param d_port --> 465
     * @param m_to --> [email protected]
     * @param m_subject --> Subject of the message
     * @param m_text --> The main message body
    public String send(String d_email,String d_password,String d_host,String d_port,
            String m_from,String m_to,String m_subject,String m_text ) {
        this.d_email=d_email;
        this.d_password=d_password;
        Properties props = new Properties();
        props.put("mail.smtp.user", d_email);
        props.put("mail.smtp.host", d_host);
        props.put("mail.smtp.port", d_port);
        props.put("mail.smtp.starttls.enable","true");
        props.put("mail.smtp.auth", "true");
        //props.put("mail.smtp.debug", "true");
        props.put("mail.smtp.socketFactory.port", d_port);
        props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
        props.put("mail.smtp.socketFactory.fallback", "false");
        SecurityManager security = System.getSecurityManager();
        try {
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getInstance(props, auth);
            //session.setDebug(true);
            MimeMessage msg = new MimeMessage(session);
            msg.setText(m_text);
            msg.setSubject(m_subject);
            msg.setFrom(new InternetAddress(m_from));
            msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
            Transport.send(msg);
            return "Successful";
        } catch (Exception mex) {
            mex.printStackTrace();
        return "Fail";
    //public static void main(String[] args) {
    //    MailSender blah = new MailSender();
    private class SMTPAuthenticator extends javax.mail.Authenticator {
        public PasswordAuthentication getPasswordAuthentication() {
            return new PasswordAuthentication(d_email, d_password);
}

How to configure the bios of the big bang marshal p67 (help)

Similar Messages

Maybe you are looking for