How to configure the combobox while using connecting throught the remote URL.

I am using the combobox in the server for the selection of process stages and is working fine.
Now I want to connect the combobox through the remote URL connection of my client system. So that it will be updated simultaneously in client and server.
While connecting through the remote URL it is giving the message the to enter the value property.
I am not able to understand what value is to be entered in this option.
Please advise the solution at the earliest.
Best Regards,
Naresh Saini

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

  • No record found in the table while using condition for the new added field

    Hi,
    I have added a new field in Z table. There is lots of record in the table. The field which I added have null records. When I am checking the record using the condition new field equal(EQ) to space or blank. This shows no record in the table, but when I execute whole of the table, it shows entries for all field.
    Please suggest. Thanks in Advance.
    Rgds,
    Hemant Maurya

    Hi Suhas,
    Thanks for your quick response.
    Yes I have run SE14 and activate & adjust the database, But problem is same.
    My select query is:
    SELECT VBELN
             PI
             GJAHR
             KUNNR
             GPD
             GPI
    INTO TABLE I_GP_DATA
    FROM ZFI_GP_DISCOUNTS
    WHERE AUGDT BETWEEN ZFI_GP_DISCOUNTS-AUGDT AND ZFI_GP_DISCOUNTS-P_DATE
    AND DOC_NO EQ SPACE.
    Thanks & Regards,
    Hemant Maurya

  • How to get default values while using the transaction "BP"

    Hi Group,
    I have a query on how to get default values while using the transaction <b>BP</b>?
    The thing is:
    when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
    how can I achieve this?
    So please kindly let me know the procedure to achieve this.
    Thanks & Regards,
    Vishnu.

    Hi,
    The events of BDT can be used to default some fields on creating a partner.
    For this create a function module for ISDAT. attach that event in BUS7.
    In the ISDAT funtion modulethe following code should be used.
    For example to set the nationality:
    I_BUSDEFAULT-NATIO = 'DE.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
    i_busdefault = I_BUSDEFAULT
    Regards, Smita.

  • How does one use Sound sticks while using HDMI at the same time ??

    How does one use Soundsticks while using HDMI at the same time ??

    Hi Caleb,
    This isn't a precise answer but a possible workable solution. SoundSource puts a menu extra which allows you to switch input/output and has an option for Auto-Switch to Headphones. The auto-switch feature doesn't work with USB headphones but I believe it will with 'regular' headphone plugs such as you use.
    http://www.rogueamoeba.com/freebies/
    (Oh, did I mention it's free Universal and works with Leopard?)

  • I can not connect to the internet while using my ipad I get a message saying Safari could not open the page because the server stopped responding need help thank you

    I CAN NOT CONNECT TO THE INTERNET WHILE USING MY IPAD I KEEP GETTING A MESSAGE SAYING SAFARI COULD NOT OPEN THE PAGE BECAUSE THE SERVER STOPPED RESPONDING PLEASE HELP THANK YOU

    Try the following:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings
    3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

  • Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

    i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt  work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

    To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
    Just what is the problem you are tying to resolve?
    Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

  • How to improve the load performance while using Datasources for the Invoice

    HI All,
    How to improve the  load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs  to update data from R/3 to 0ASA_DS01.
    If I load through flat file it will load with in ~20 Min for the same amount of data.
    Please suggest how to improve load performance.
    PS: I have done the Inpo package settings as per the OSS note.
    Regads
    Srininivasarao.Namburi.

    Hi Srinivas,
    Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
    Thanks,
    Divyesh
    Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM

  • TS1398 I can't connect to the internet while using wi fi on my iphone 4S.

    I can't connect to the internet while using wi fi on my iphone 4S. I can connect on my computer and on my IPad but not with my iphone. I have tried everything. Once or twice it did connect but then disconnected immediately. I have tried everything.

    LeeinSunnyIsles wrote:
    I can't connect to the internet while using wi fi on my iphone 4S. I can connect on my computer and on my IPad but not with my iphone. I have tried everything. Once or twice it did connect but then disconnected immediately. I have tried everything.
    If you have truly tried "everything" then there is no hope of it ever working again. However, have you tried rebooting your router?
    Have you tried Settings/General/Reset - Reset network settings?

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system prefer

    how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system preferences.  what else do I need to do?

    First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
    I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
    Matt

  • How to handle  user exits while using BAPI

    HI experts can any one help me on how to handle user exits while using BAPI. Do we need to handle it explicitly or standard  BAPI will take care of it??.
    Regards,
    Hari Krishna

    If you have added some fields using append structures for screen enhancements, then you have to use appropriate user exits to fill these data while calling BAPI.  Some BAPIs have EXTENSION structures to fill the custom data which can be processed using user exists or enhancements.
    Regards
    Vinod

  • My mac book air suddely disconnects many times the wifi while using wifi

    my mac book air suddely disconnects many times the wifi while using wifi

    Lots of things can impact wifi connections.  If you are at the marginal edge of the wifi range (which depends not only on distance, but what's between you and the transmitter) you may find the connection dropping in and out.  Sometimes a minor repositioning of the computer or transmitter can solve the issue.
    As well, interference can also create problems.  For instance, microwave ovens are really good at disrupting 2.4Ghz signals, and that the frequency used most often in wifi routers--so if someone turns on the microwave and it's between you and the transmission point it won't be surprising if the connection drops.  As well, metal blocks the signal fairly effectively, so if (say) ductwork is between the CPU and the wireless router there can be problems.
    Finally, I've run into some combos of devices and routers that just don't seem to like each other :-) .  That said, I've not hit that problem with either Air I'm running (an 11" and a 13"), though obviously I've not tried to connect them to every type of router out there.
    Just this week I was at a hotel and in my room the hotel wifi was "interesting" with every device I tried (iPhone, Android phone, Kindle Fire, iPad and the two Airs) dropping connection regularly from the work desk.  Turned out if I moved the devices over to the nightstand on the other end of the room (not the best work environment) all of the problems went away, so it clearly was a signal issue and the exact layout of that room and the hotel's wifi.
    If the machine has a problem when positioned close to a variety of routers, then I'd suspect a hardware issue with the wifi card in the Air and get that checked by Apple.  Similarly, if your problem is with your home router, I'd check to see if other devices also are getting dropped, since there could be a hardware issue on the router.

  • On my iPad home screen, the mail app used to indicate the number of new emails I had with a number in a red circle.  This has vanished since I upgraded.  Does anyone know why, and how to restore this?

    On my IPad 2 home screen, the mail app used to indicate the number of new messages with a number in a red circle, next to the app.  This has vanished, I think about the same time as when I upgraded to the new OS.  Does anyone know why and how to restore this feature? 

    Thanks.  While you were replying to my question, I went into notifications and figured
    it out.  Appreciate the quick response!

  • How to get the IP of the client when TCP connect in the server

    How to get the IP of the client when TCP connect in the server.
    The only parameter got from the connection is connectionID.
    Solved!
    Go to Solution.

    I guess you're using "TCP Wait on Listener" on the server. This returns the remote address and port (as optional outputs).

  • DCOM was unable to communicate with the computer xyz using any of the configured protocols; requested by PID 7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).

    Hi,
    Previously I've two exchange server 2013 named : ABC and XYZ. After is decomm XYZ, i got this error :
    DCOM was unable to communicate with the computer XYZ using any of the configured protocols; requested by PID     7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).
    EventID:10028
    Source:DistributedCOM
    May I know the reason why the server keep looking for the non-exist server and how to terminate this process?
    Thanks in advance.

    Hello,
    It seems that error message occurs on the same machine with the previous Exchange Server you have decommissioned. Have you reinstall the Windows System after uninstall the Exchange
    Server?
    You need to check the registry keys but this is not efficient solution. The most efficient way is to reinstall the Windows if it is convenient.
    Thanks,
    Simon Wu
    TechNet Community Support

Maybe you are looking for