How to configure the intensity of my Time Capsule's WIFI signal?

Hey,
I own a TC from late 2009, the Firmware is up-to-date (7.6.4) and I installed it in a new place. The intensity of the WIFI signal is suprinsingly low, significantly lower than the signal of any non-Apple WIFI-router I previously used in the same flat.
I remenber having configured the TC back in 2010 with a lower WIFI-Intensity because I had a very little room and no need for an powerful signal. I probably haven't changed this since than ans this could be the reason why the signal coming from the TC is so low. The problem is that I can't find a way to configure the WIFI-intensity back to normal/ maximum.
Does anybody know a way for OS X Mavericks?
Thanks a lot!

There is no change..
Reset to TC to factory.. even if you did alter it, the setting will go back to 100%.. there is nothing else you need do.

Similar Messages

How to erase the existance of a Time capsule

Hi,
I would like to know how to erase the existance of a Time capsule, like it never existed, because sometimes I can see remains of my old network, and I'd like to know how to reset all this,
sincerely

Welcome to the discussions!
You will want to do two things to get the TC back to total factory defaults:
1)Return all configuration settings to factory defaults
2)Erase your disk. (Do this only if you want to erase all of your backups).
Power down the TC for a few minutes
Hold in the reset button and KEEP holding it in as you plug the power back in
Release the reset button after approximately 10 seconds
Your configuration is now reset to factory defaults.
To erase the disk:
Open AirPort Utility, click Manual Setup
Click the Disk icon at the top of the setup pane
Click the Disks tab just below the icons
Click Erase. Choose your erase options only if you want to erase all backups.
That's it.

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How to restore the backup files on time capsule after reinstalled the system

please can someone help me to restore my backups on time capsule after reinstalled the new system. I tried after finished reinstall but it could not find. I also tried with the migration assistant in utilities, it also doesn't work. I always have time machine backed up all my files but now I can not bring anything back

ellabs wrote:
please can someone help me to restore my backups on time capsule after reinstalled the new system.
What "new system" did you reinstall?
Are you upgrading from Leopard to Snow Leopard?
Or did you reinstall Leopard? If so, why and how (that may provide a clue)?
How is your Mac connected to the Time Capsule (use Ethernet for best results)?
You may need to repair the backups, per #A5 in Time Machine - Troubleshooting.

How to access the films in a time capsule from a hard disk media player?, how to access the films in a time capsule from a hard disk media player?

The hd media player can access film in shared disks of LAN but not that in time capsule?
how can I get it?
thanks!

More info required.
What media player would help.
Can the media player see the TC?
Can the media player see files and directories in the TC?
If not have you turned on guest access, and got the right workgroup name for the rest fo the network?

How shall i do it ? Complex question about how to use the airport express or time capsule ?

Hello All,
Right now i have an access point:
1/ A mercury router (cheap and old)
2/ Airport Express
Do you advice me to use it to replace my cheap old router (mercury) or to pair it with this main old router ? (however i tried to without any success)
3/ Time Capsule
Can i use it to relay the signal from the Airport Express to extend the range of the wifi?
Can i use it to stream music to my B/W M1 speakers directly ? (I will connect by USB the BW M1 to the time capsule) and would like to be able to play music this way. Is this in anyway possible ?
Many thanks for your reply !

ok, i might be wrong but here goes:
you should attach your modem to your time capsule: your time capsule will act as not only your time machine but also your main wireless transmitter.
you set it up using "Airport Utility" which is inside the "utilites" folder, which is inside your applications folder.
this connects your mac wirelessly to the internet.
to stream music to your speakers you then set up the airport plug to (a) join the existing network (which you set up on the time capsule) and then (b) set it up to stream music to your speakers. again, this is done using "airport utility". do it AFTER you have set up the time capsule.
you will then be able to use itunes to stream music to your speakers. from itunes on your computer you will be able to chose from the bottom right hand side of the window whether you play the music on your computer or wirelessly into your B+W speakers...
some notes:
1. you won't be able to connect the airport plug by USB to your speakers as the airport plug doesn't have a USB output. It has only analogue and optical.
2. although your time capsule has USB you cannot stream music into it or through it. there's some basic guidance here:
http://www.apple.com/wifi/
3. you may find that the sound quality [if you are playing apple lossless files or wav files) isn't as good as if the speakers were connected directly to your mac via USB. this should be especially noticable because your speakers are so good!
if the music you play is only mp3 or the stuff purchased from itunes then it shouldn't make too much of a difference.
4. keep an eye out on the B+W website: there may come a time when you won't even have to use the airport plug, and you will be able to stream music straight to the speakers. i know that B+W have just done that with the new Zepellin speaker that they make.
hope this helps...

How to check the contents of my time capsule back up

My new Time Capsule has treid to back up my MAcBook since yesterday. In the Time MAchine list, I can find the folder but not the size of the back up or any other details which files etc. were backed up. The symbol in the upper part oif the sreen (what is hte name) is working or not.
Time Capsule is also quite hot.
I have connected the Time Capsule with ethernet to MacBook, not to my modem. Is that correct?
BR maritafromhelsinki

You also access it from the finder just double click on the time machine icon then you can see the backups on the drive right click on a backup and select get into. Or you can open airport utility and click on the manual button, when your get to the next screen click on the disk up top then click on the time capsule in the window it will get you info.

Does Time Capsule receive Wifi signal? or it must via connected via cable to a router?

Hi everyone,
I would like to know if the new Time Capsule 2TB receives wifi signal or if it must be connected via a cable to our router.
Thank you so much,
Regards

The recommended connection method would be to connect to your modem or router as Apple illustrates in the Time Capsule Setup Guide
However, if you already have another Apple router providing a wireless network, the Time Capsule can connect using wireless, and also "extend" the wireless signal from the main Apple router.

How can I difference the diference the diferent generations of time capsule

Hi, I want to buy the Time Capsule, but first I want to know how can I know how to diference the diferent generations of time capsules before buying, to buy the latest one.

Latest one has a different part and model number..
Awful easy to google you know.. google is your friend.
http://en.wikipedia.org/wiki/Apple_Time_Capsule
No shops will be selling new Gen3 by now.. Gen4 has been out since June 2011.

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to configure the mail in Sales Support of SAP SD

Hi,
Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
company. For this every time we are changing the sold to party in quotation and taking printouts then
sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
once to our 300 users may i know about how to configure the mail for this scenario.
Thanks and Regards
MH

Hi Prashant,
Thanks for you immediate responce, Can you give me the configuration steps in detail.
Thanks and Regards,
MH

In Exports sales process, how you configure the Duty Draw Back

in my case
we r creating Exports but
duty unavailability of time and time taking process in export processing
we are creating Excise invoice and cenvat is debited .
now we r asking the govt. for the duty draw back for the value already cenvat is debited with proper documents like ARE1 etc.
how to manage this duty back and what r the replications or changes thereafter
thanks in advance

Hi Sunitha,
Pls can u explain how did u solve (In Exports sales process, how you configure the Duty Draw Back) this issue....since i don't have idea abt this...but shortly i am going to do this in my client place....
thanks,

How to configure the services(WDA) in ESS with EHP7

Hi Experts,
I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with EHP7.currently we are using
ECC6.0 EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
How to configure the service in launch pad with WDA.please guide me the step by step procedure.
Please share the config guide if anyone have.

hi sap scn ,
Tips & Recommendations for customizing ESS Menu (WD ABAP) - ess launchpad
Summary of configuration options in ESS Personal Information scenario -personal information
go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
if any other revert back again

How to configure Lion Server as network time server?

I have Lion Server at the top of a small network of Windows 2K, Windows XP and Windows 7 machines.
I need each of those computers to synch their time to that of the Mac Server because this network operates without internet access.
I have tried various protocols from those machines to synch on the server's IP but they all fail.
It has led me to belive I need to enable a service to allow time synch to the managed computers.
But I can't find information on this. I keep getting directed to how to synch the mac to a time server or time machine configuration tips.
Thanks in advance

In Server Admin, select your server, click on Settings, then go to the General tab. You will see an option to enable the Network Time Server.

How to configure the intensity of my Time Capsule's WIFI signal?

Similar Messages

Maybe you are looking for