How to configure the KMC and Business packages in trail version 7.0

Hi Experts,
I have installed the Sneak Preview version 7.00 SP9 from the sdn.
If i want to start working on the KMC
What i need to install and configure for KMC and collabrations.
If i need to install, where i will get the installables and documentaion.
In the same . I would like to install the business packages also in the same server. where i will get the insallables and related dcoumentation.
R/3 version is ECC6
Regards
Vijay
Regards
Vijay

Dear Samuli,
Thanks for the Replay,
We are using HTTPS and SSL confined but man in the middle types of attack is happening here there using one tool based one there taking the Request and Response.The below given cookie are available in that request.
According to this , set-cookie: JSESSIONMARKID , JSESSIONID and MYSAPSSO2 values are user login time it will change every time  are not.
After  capturing above response HTTP/1.1 302 etc , when user gives valid credentials and logs in ,
and now ill give wrong password and wrong user id and on click of log on button, i can intercept the request and response coming from the server and when i replace this valid response stil i am able to loggin in to the portal , which should not happen as JESSIONMARKID is changed , server should not allow , but it is loggin in.Standard Login page also allowing to login in this case.
My server version is EP 7.0 SP 12.
Please suggest a solution so that if we restric the hacker at this stage , no matter he can never hijack the sesiona and login  with invalid username and  password.
Thanks for Advance
Thanks and regrades,
Durga Rao.

Similar Messages

  • How to configure the runtime and consolidation for a track in CMS.

    How to configure the runtime and consolidation for a track in CMS.
    I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
    I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
    Please advise , what are these required for. And how can we configure the same.

    The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
    Hope it helps..
    Regards,
    Shikhil

  • How to configure the XI  and PLM in discovery box

    How to configure the XI (SLD, Integration repository, Integration Builder ) in  SAP discovery system.
    And also i want to configure the PLM and xRPM within R/3 of discovery box.
    Regards,
    Nilesh Damle

    Hi Frank,
    well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
    Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
    I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
    Greetings,
    Ivo

  • How to configure the sort and port of a SOAP address dynamically

    Hi All,
    In the “wsdl” we have the SOAP Address defined but in practice we would like to configure the host and the port. As the server on which the service resides may/will change.
    For example:
    http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
    We would like to configure the proxy to point to say:
    http://<host>:<port>//sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
    What we see in the Proxy Code is:
    port.setSOAPAddress(new com.sap.flex.ws.runtime.SOAPAddress("http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003"));
    How could this be achieved.
    Please help.

    Hi Sumit,
    Thanks for the quick response. However, I do not want to change the host and the port in the wsdl. I want it to be so, that it will pick the host and port dynamically(as you have mentioned). However, in out case, the web service has the SOAP address hardcoded as <b>http://usciq74.wdf.sap.corp:50077</b>.
    We would want to write something as http://host:port and then let it pick the host and port dynamically. How is that possible.
    Best Regards,
    Debashree.

  • How to configure the ST03N and ST06 for displaying the correct data?

    Hello guys,
    I have just finished a internal project installation following the installation guide.
    Our R/3 System can run correctly. However, when I type st03n, it displays some strange data instead of the real server information. and also in st06, I cannot get the real OS information.
    The OS collector said that saposcol is not running because of no process id found.
    But in the OS level, I've checked the server and saposcol -s said that the saposcol is running correctly.
    I searched some notes and modify the processor of the SAPOSCOl service, too. But nothing changes.
    I think the ST06 issue is the root cause of the ST03N.
    I just wonder that how I could configure the system to make the ST03N or the ST06 display the correct statistics?
    Thanks in advance.

    I got the answer myself.
    I didn't know there were some standard jobs that are required to scheduled for a live R/3 System.
    In SM36, find the standard jobs and input 'bc' in sap components and select the jobs scheduling job and set it as periodly run jobs(hourly).
    then release the schedule.
    And note 16083 has all the information.

  • How to configure the logging and tracing in J2EE-Server

    Hi,
    when I've been using the SAP Logging and Tracing Framework before from more or less "standalone" Applications I always used a property file which configured the levels of severity  etc.. During application startup I've read this file and configured the logging properly.
    In a J2EE-Environment (SAP WEB AS JAVA) I cannot read a file from a file - system. So I'm wondering where are those handlers and severity levels are configured ?
    Any help is greatly appreciated.
    Thanks in advance,
    Frank

    Hi Frank,
    well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
    Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
    I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
    Greetings,
    Ivo

  • How to renewal the licence of NW Java7.0 trail version

    Hi,
      I have installed NW Java7.0,licence has expired,how to instal the new licence in Java system,how to get the hardware key for Java system....
    Thanks in advance.....!!!

    Hi,
    as for any other trial version you can request again on [http://www.sap.com/minisap|http://www.sap.com/minisap].
    Cheers

  • How to configure the network and access to the Extender

    I have the Philips Wifi router of Belgacom and le LED of LINK of the Extender stay red. When I use the software on PC, it doesn't find the Extender.. 
    How are parameters to configure router for the Extender can configure it? On my Extender, I can't connect a cable, this is the first model.... Thanks for help

    try to reset the extender...
    look for its default SSID which is linksysRxxxx on yOur wireless computer then connect to it...
    after connecting set staticIP on yOur wireless computer and then try to access the extender frOm there(192.168.1.240)....
    hOpe this helps...  

  • How to configure the fixed cost

    Dear all,
    When i am working the product cost in CK13N i got the cost for both fixed and variable.I want to know how to configure the fixed and what are the facors are considered? which Tcode is most suitable to view the same?
    Can any one help me in this regard
    P.Selvakumar

    Hi
    The Material cost from BOM is usually variable cost
    Activity cost - can be fixed or variable depending on your price in KP26
    Overheads from costing sheet can be fixed or variable - depending on how you define the BASE key in the costing sheet
    br, Ajay M

  • How to configure the Business Systems & Technical Systems into PI 7.0

    Dear All
    Kindly let me know how to configure the Business Systems and Technical Systems into PI 7.0
    any word document/PDF would be very helpful.
    Regards
    Blue

    Hi ,
    You have to do the configure/creation of  the Business Systems & Technical Systems  in SLD.Generally this is maintained by Basis team in the Project.If you are looking to learn how to create BS and TS in SLD
    You can find some useful information here on SLD concepts and creation of SLD
    http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+%28SLD%29
    Please refer this document for more understanding of SLD
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00462bb-b7a0-2a10-8da6-f6b89834f8b4?quicklink=index&overridelayout=true
    Regards,
    Srinivas

  • Configuration and Business Package for Learning Solutions

    Dear Experts,
    I need informtion on the configurations and Business Package for Learning Solutions 2(business function HCM_LSO_CI_2) which comes with EHP4. We need to implement the LSO functionalities and I was not able to find out the required Portal Business Package. Please share your experience for implementation of LSO.
    Regards,
    Samir

    Dear Experts,
    Anyone already done LSO Learning Solutions implementation for Ehp4.Please provide inputs.
    Regards,
    Samir

  • Please guide me How to configure the swift integration packages

    Hi frinds,
    Please guide me How to configure the swift integration packages, in swift we have to use MT103 format
    sender side we have ERD system and Receiver side File system,
    wt adapters  we have to use in sender side and what kind of encrypt and decrypt formats support for swift in PI

    hi,
    the only reference we have is this OSS note and guides inside it
    1064419 SAP Integration Package for SWIFT: Info about installation
    Please have a look at it,
    Regards,
    Michal Krawczyk

  • Could you send me the ESS MSS Business Packag installation guide and confi

    Could you send me the ESS MSS Business Packag installation guide and configuration steps . I wanted to learn ESS and MSS configuration steps
    Regards
    Jagan

    Answer in Short = Yes I can.
    Bu the study material is voluminous and cannot be attached so SAP has created a website with all the material in it here is the address: http://help.sap.com
    You should find the site very very informative. Good Luck.
    cheers

  • I would appreciate your help on how to configure a gmail in a way  it  ask  for the password  everytime I connect?. In the only way I can configure it  I have to include the pw when configuring the account  and  after that  it do not ask for pw

    I would appreciate your help on how to configure a gmail in a way  it  ask  for the password  everytime I connect?. In the only way I can configure it  I have to include the pw when configuring the account  and  after that  it do not ask for pw  so  everyone that shares my iPad can  oppen my mail  with  no pw  required.
    Thank

    The iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.

  • How to Configure the Netweaver CE UDDI Server and Registry

    Hi,
    I'm trying to configure the UDDI registry in Netweaver CE (trial version 7.1 SR 1) following the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/45/47e8e91587072fe10000000a155369/frameset.htm">SAP Help documentation</a>. But as the help is not detailed not sure whether I'm doing it correctly. I can access the Service Registry by http://<host>:<port>/sr but not sure whether everything is fine. Also I want to publish Enterprise Services in the registry. As it's not possible to do that from ABAP 7.0 WebAS (doesn't not support UDDI v3) I want to do it via the UDDI client. How to configure the UDDI client by providing the Inquiry URL, Publish URL, etc in the settings?
    Please help me if anyone has any information regarding this.
    Thanks,
    Dipankar

    I am working through the same issues and have not found all of the answers.  However, this may get you closer.
    See http://help.sap.com/saphelp_nwce10/helpdata/en/45/635dd614d73bdbe10000000a1553f7/content.htm for some physical destinations that have to be set up for Visual Composer.
    You can also connect to the registry in NetWeaver Developer Studio by launching the Web Services Explorer from the J2EE Perspecive.  See the help for more details.

Maybe you are looking for