How to configure the mac mini to allow the clients to access both partitions...the client will only see the one we are logged into at the server???

if possible??? how do we configure the mac mini to allow the clients to access both partitions...the client will only see the one we are logged into at the server???

You have to explicitly share directories on external/secondary volumes.
Use the Server admin app to configure file sharing, and select which directory/directories on the second drive you want to share, then they'll be available to clients.

Similar Messages

How to configure the server 2012 with NAT settings & 3 public IP addresses

Hi everybody,
I received this from my ISP:
Here's your IP informationMain IP: 70.164.1.165Subnet
Mask: 255.255.255.0
Gateway: 70.164.1.1
DNS1: 68.4.16.30
DNS2: 68.6.16.30
2 additional usable IP's Natted to 70.164.1.165
Usable IP's 70.182.178.97 & 98
Subnet Mask if needed: 255.255.255.252
If you are using one server use 70.164.1.165 as the main IP then add/bind 70.182.178.97 & 98 to the NIC.
For Linux Servers
Network 70.182.178.96
Broadcast 70.182.178.99
If you are using a firewall or router, please make sure you are using 70.164.1.165 on the WAN interface, you can use / NAT 70.182.178.97 & 98 to your server(s).
Main IP can also be natted to your server.
Please make sure shared IP hosting is utilized to conserve IP addresses per ARIN requirements.
I have a Dell server, setup with Server 2012 DataCenter.
I plan to run two VM's running ASP.NET web applications connected using the two additional IP addresses.
I assume I should setup the VM Host to the base address .165 - simple enough no problem and I know how to setup the VM's on their own separate network and I can access the internet - no issues with that.
How do I setup the additional public addresses since they have to pass through the Main address to the correct VM?
I have googled for a few days and my ISP tech people look at me like I want to extract their teeth. Their answer is to sell me a router and set it up. This really does not seem that hard a task.

Try maybe below configuration.
VMHOST
NIC1 - 70.164.1.165
NIC2 - 192.168.0.1
255.255.255.0
NIC3 - 192.168.1.1
255.255.255.0
VM1:
Bind VM NIC1 to VMHOST NIC2
NIC1 - IP1:192.168.0.2 255.255.255.0
IP2:70.182.178.97
VM2:
Bind VM NIC1 to VMHOST NIC3
NIC1 - IP1:192.168.1.2 255.255.255.0
IP2:70.182.178.98
On VMHOST set static traces (use Command Line):
ROUTE ADD 70.182.178.97 MASK 255.255.255.255 192.168.0.2
ROUTE ADD 70.182.178.98 MASK 255.255.255.255 192.168.1.2

BI 4.0 How to configure the server properties in CMC

The BI 4.0 administration guide only gives information about core service ( in the appendix ). Where to find the explanation of properties for other servers like dashboard design / federation servers. Thesehave some specific parameters and there is no documentation as to what these mean and what should be the values in them.
Thanks
Sanjay

hi,
Please refer below link for respective sections.
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_bip_admin_en.pdf
24.1.8 Dashboard Design Services Properties
Dashboard Design Cache Server Properties
Table 24-42: Dashboard Design Cache Service Properties
Dashboard Design Processing Server Properties
Table 24-43: Dashboard Design Processing Service Properties
Table 24-44: Single Sign-On Service Properties
25.1.11 Dashboard Design Server Metrics
Table 25-23: Dashboard Design Processing Server Metrics
24.1.6 Data Federation Services Properties
Table 24-34: Data Federation Service Properties
Regards,
Vamsee

How to clone 40 mac mini at the same time using network clone (like Ghost)

how to clone 40 mac mini at the same time using network clone (like Ghost)
Any Ideas ?
Thanks

Rather than a 100% identical clone to 40 Macs, I suspect you want the same basic image to be loaded on to those 40 Macs but will require some individualisation so that for example each has a unique computer name.
NetRestore and System Imaging Utility can do this but a lot of people including myself prefer to use DeployStudio which has more capabilities. See http://www.deploystudio.com
DeployStudio can be used to like NetRestore to restore an image to multiple Macs at the same time which is like multiple people downloading at the same time, but it can unlike the standard NetRestore also be configured to use multicast traffic which is more like a TV broadcast whereby multiple people receive the same transmission at the same time. This can be more efficient for imaging larger numbers of computers at the same time. For example 1Gbps shared between 40 computers is only 25.6Mbps each, but if you multicast a single transmission of 100Mbps to 40 computers then all 40 can listen to it at the same time and still be receiving 100Mbps even on the same network connection.

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

What is "best practice" to set up and configure a Mac Mini server with dual 1 TB drives, using RAID 1?

I have been handed a new, out of the box, Mac Mini server. Has two 1 TB drives in it. Contractor suggested RAID 1 for the set up. I have done some research
and found out that in creating the software RAID, this takes away the recovery partition, so I have been reading up on how to create a recovery "disk" using a thumb drive. this part of the operation I am comfortable with, but there are other issues/concerns that I have.
Basically, what is the "best practice" to setup the Mini, configure the RAID and then start the server. I am assuming the steps would be something like this:
1) start up the Mini and run through the normal Maverick setup/config - keep it plain and vanilla
2) grab a copy of the Server app and store it offline in a safe place
3) perform the RAID configuration / reinstall of OS X Maverick using the recovery tools
4) copy down and start the server app
This might be considered a very simplified version of this article (http://support.apple.com/kb/HT4886 - Mac mini server (Late 2012 and Mid 2011): How to install OS X Server on a software RAID volume), with the biggest difference being I grab a copy of the Server App off of the mini before I reinstall, since I did not purchase it from the App store, but rather it came with the mini.
Is there a best practice / how-to tutorial somewhere that I can follow/learn from? Am I on the right track or headed for a train wreck?
thanks in advance

I think this article will answer your question. Hope this helps: http://wisebyte.blogspot.com/2014/01/best-configuration-for-mac-mini-server.html

How many users on Mac Mini Server?

Good morning,
Apple's recent changes to the Mac Mini line have thrown a wrench in a project plan I've been working. One part of the project needs a quad-core computer (FileMaker Server) and so I'm having to either search for an older model or switch up to a Mac Pro.
The other part of the project involves bringing a Mac-based server in for directory and user services, including mail. I had planned to use the high-end Mac Mini Server but that option was removed. The office I'm supporting is about 15 people (usually a little less on the network) and most of their work will actually be done against the other computer running the FileMaker Server-based application. I was not expecting a big load against the Mac Mini Server. But these changes got me wondering, what are others' experiences with Mac Mini as a server for 12-15 people? I'm happy with qualitative and quantitative data, but I would like to know which is which. In general:
     For how many users have you provided directory and user services (built in to the OS) using a single Mac Mini?
     What were the specs of the Mac Mini (year or model, speed, CPU config, RAM)?
     Other thoughts?
In essence, I need to understand if people have successfully used dual core processors as Mac Mini servers in environments of 12-15 people. I've done it using a 2012 Mac Mini Server with 5-6 and the loading seems to support further growth, but would like real-world experience.
Thanks.

Dutch Apple employee told me that Mac OS X 10.6 Server has also Windows Terminal Services equivalent.
But this is not !
Not yet (?) available in Snow Leopard Server.

HT1444 As an obvious novice I want to know how to upgrade my mac mini OSx 10.4 to a newer system can anyone help?

As obvious novice I want to know how to upgrade my mac mini 10.4 OS X to a more uptodate system

At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Machine Name:          Mac mini
Machine Model:          PowerMac10,1
CPU Type:          PowerPC G4 (1.2)
Number Of CPUs:          1
CPU Speed:          1.42 GHz
L2 Cache (per CPU):          512 KB
Memory:          512 MB
Bus Speed:          167 MHz
Boot ROM Version:          4.8.9f1

How old is my Mac mini

How old is my Mac mini?
Here is the info from the 'about this mac' button:
Model Name:          Mac mini
Model Identifier:          Macmini2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          1 GB
Bus Speed:          667 MHz
Boot ROM Version:          MM21.009A.B00
SMC Version (system):          1.19f2
Serial Number (system):          YM8414TLYL1
Hardware UUID:          00000000-0000-1000-8000-001FF345C86D

OVERVIEW
Introduced     August 2007
Discontinued     March 2009
Model Identifier     Macmini2,1
Model Number     A1176

I don't understand how much memory a mac mini has please help!

I feel really stupid asking this, but I can't understand how much memory a Mac Mini has...
512MB of 667MHz DDR2 SDRAM (PC2-5300), supports up to 2GB
I hope that doesn't mean it only holds 2GB...but I don't know.
PLEASE HELP ME! I need to get a Mac soon before my PC dies again.
Mac Mini

Hi opera_rocker
I think that you may have found yourself in a little bit of a pickle regarding technical hardware terms, so I'll try and clear things up for you.
The Mac Mini comes as standard with 512MB of RAM (Read Only Memory). RAM is a little stick that is built into the computer that supplies the software with all the virtual memory that it needs to accomplish tasks. The more RAM that you have in your computer, the faster software will run, and the more things you can have going on at the same time. You never actualy use RAM for personal files and folders. The Mac Mini will accept a total of 2GB of RAM, which comes as an optional upgrade from Apple, however, 1GB is more than adequate.
All of your files and folders are kept on your hard drive, like that in your 30GB iPod. Everything that you use on your computer, whether it be Word Processing software, or Games for example, are stored on the hard drive. The Mac Mini can come with either a 60GB, or 80GB Hard Drive depending on which model you decide to buy. That's plenty more space than you have on your actual iPod and you will most probably never seem to run out of room!
Hope that I may have been of help!
-Pos
Message was edited by: Pos

How to configure the mail in Sales Support of SAP SD

Hi,
Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
company. For this every time we are changing the sold to party in quotation and taking printouts then
sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
once to our 300 users may i know about how to configure the mail for this scenario.
Thanks and Regards
MH

Hi Prashant,
Thanks for you immediate responce, Can you give me the configuration steps in detail.
Thanks and Regards,
MH

How to configure the JMS application in WSAD 5.0

hi
i need to configure an JMS application in WSAD 5, but while configuring the application i am checked with intial context exception. but i have configured the jndi in the server. but i cant able to run the application.
can anybody help me like how to configure the JMS application in WSAD (can we configure it without MQ simulator if yes i need the steps)
thanks in advance

Hi,
did you check the WebSphere documentation or ask a question on an IBM forum?
Frank

In Exports sales process, how you configure the Duty Draw Back

in my case
we r creating Exports but
duty unavailability of time and time taking process in export processing
we are creating Excise invoice and cenvat is debited .
now we r asking the govt. for the duty draw back for the value already cenvat is debited with proper documents like ARE1 etc.
how to manage this duty back and what r the replications or changes thereafter
thanks in advance

Hi Sunitha,
Pls can u explain how did u solve (In Exports sales process, how you configure the Duty Draw Back) this issue....since i don't have idea abt this...but shortly i am going to do this in my client place....
thanks,

How do you configure the server in this situation?????????????

Hi,
We have Oracle 10.2 and Windows 2003.
We have Oracle on Cluster (with Windows software).
When the System are without cluster all its OK!!!!!!
We have 2 Resources Cluster Group: Oracle and Applications.
We have Oracle in Oracle cluster group.
We have W Drive and a ftp program in Application cluster group.
We have C drive in both nodes. We have installed Oracle in both nodes but we have W drive only associate to the Active Node because is a Cluster resource (Application cluster group).
All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
We think to put UNC pathes instead of W but its not possible (Metalink: Note:290703.1)
How do you configure the server in this situation?????????????
Thanks!

We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

Can anybody explain how to configure the Centralized contract in SRM 7

Hi All,
Can anybody explain how to configure the Centralized contract management in SRM 7 with ECC EHP4 ?what are all that need to be perform in PI system.
Thank you,
praveen

Hello,
PI will be required here. You can also refer the config guides maintained at the belwo mentioned location.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 -> Configuration Guides for SAP SRM 7.0
Best Regards,
Rahul

How to configure the mac mini to allow the clients to access both partitions...the client will only see the one we are logged into at the server???

Similar Messages

Maybe you are looking for