How to configure the MOSS Crystalreportviewer using ActivX

Post Author: dileepj
CA Forum: General Feedback
Hi
I am using the MOSS BO integration Kit, and have used the crystalreportsviewer web part. But I want to configure the web part to use the ActiveX component. I would like to get some pointers as how to configure the web part to use the activeX viewer.
Thanks in advance
Dileep Jose

how to access excel files using java.i know
jakaratapoi is support to access excel files
how?The home page for POI has all the how to's replied. :)
http://jakarta.apache.org/poi/hssf/how-to.html
http://jakarta.apache.org/poi/hssf/quick-guide.html

Similar Messages

How to Configure the system to use an firm's accepted warning banner in 10g

Hello.
I need to configure the system (oracle 10.2) to use an firm's accepted warning banner. I was able to do it in version 11 by putting entries in sqlnet.ora file. It then displayed when connectting as user (sys, system). I tried the same with 10.2 version and it doesnt display. Do i need to do anything different in 10g. I could not find the lead on googling it.
I used theses entries in sqlnet.ora for 11g
SEC_USER_UNAUTHORIZED_ACCESS_BANNER = <path>\banner2.txt
SEC_USER_AUDIT_ACTION_BANNER = <path>\banner.txt
Do we have to do differenetly in 10g. please help
Thank you very much

maggie wrote:
Thanks for responding. Is there a way to create a banner in 10.2 version of oracle. I need to didpaly it as part of checklist i am working on for 10g.
ThanksUnfortunately, auditors and security nazis dream up "requirements" without ever considering the capabilities and limitations of the selected technology. A lot of these guys get their technical knowledge from American Airlines Magazine when they get tired of reading the SkyMall catalog.
Sometimes you just have to document the exception, get a manager's signature, and keep it on file.

How to configure the combobox while using connecting throught the remote URL.

I am using the combobox in the server for the selection of process stages and is working fine.
Now I want to connect the combobox through the remote URL connection of my client system. So that it will be updated simultaneously in client and server.
While connecting through the remote URL it is giving the message the to enter the value property.
I am not able to understand what value is to be entered in this option.
Please advise the solution at the earliest.
Best Regards,
Naresh Saini

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to configure the use of WS-RM in "PI 7.11 EHP1?

How to configure the use of WS-RM in "PI 7.11 EHP1?
Currently in the editing window of the communication channel (adapter type WS), I can not see any options regarding Reliable Messaging protocol (WS-RM).
The scenario that is required is as follows.
(Consumer WS-RM) -> (Provider WS-RM PI 7.11 EHP1) -> (ABAP Proxy Backend NW 7.0)
I would greatly appreciate any help,
Thanks,
Roger.
Edited by: Roger Solano on Apr 7, 2011 10:31 PM

WS adapter supports WS Reliable Messaging. But WS adapter is used to communicate between two SAP web service runtime.
Check this blog and its links for understanding direct connection or point to point communcation using WS adapter
/people/william.li/blog/2008/02/13/point-to-point-connection-using-abap-in-sap-using-pi-71
Hoe that helps.

How to load the boot menu using the command line , after the configuration change ?

how to load the boot menu using the command line , after the configuration change ?

Hi @Bask-48
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are trying to change the boot order. Here is a link to Configuring the Boot Order in the System BIOS
that will assist you.
Good Luck and Happy Holidays!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How to avoid the anonymous login using RIMLoginModule?

Hi everybody,
we have configured the RIMLoginModule on a WebAS to enable SSO on Blackberry devices. The login module works as expected when the Rim-device-email header parameter is available in the request. But without this header an automatic login occures using the anonymous user. How should we configure the module or the security provider to avoid this behaviour?
Note: if we lock the anonymous user, the problem is solved. But, we want to keep the anonymous user unlocked and configure the module to use a basic authentication when the Rim-device-email pamaeter is missed in the request.
regards
Edited by: Michael Kinder on Nov 7, 2008 9:20 AM

Sean
You need to set up the anonymous user (via Admin). Add him to the
defaultRole and then you can assign the channels to the anonymous user as
per normal.
Cheers
Sean Xue wrote:
I setup a domain only have anonymous authenticate module and I can't add
the channels that I like to be displayed to the login page. Is anybody
know how to do that. Thanks.

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

How to configure the services(WDA) in ESS with EHP7

Hi Experts,
I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with EHP7.currently we are using
ECC6.0 EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
How to configure the service in launch pad with WDA.please guide me the step by step procedure.
Please share the config guide if anyone have.

hi sap scn ,
Tips & Recommendations for customizing ESS Menu (WD ABAP) - ess launchpad
Summary of configuration options in ESS Personal Information scenario -personal information
go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
if any other revert back again

How to configure the .ini file with applet

hai
i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browser

Hi Jay SenSharma,
Thanks for your immediate response.
I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
Regards,
S.vinoth Babu

How to configure the smtp server..

i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...

This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
    private String d_email,d_password;
     * This example is for gmail, you can use any smtp server
     * @param d_email --> your gmail account e.g. [email protected]
     * @param d_password --> your gmail password
     * @param d_host --> smtp.gmail.com
     * @param d_port --> 465
     * @param m_to --> [email protected]
     * @param m_subject --> Subject of the message
     * @param m_text --> The main message body
    public String send(String d_email,String d_password,String d_host,String d_port,
            String m_from,String m_to,String m_subject,String m_text ) {
        this.d_email=d_email;
        this.d_password=d_password;
        Properties props = new Properties();
        props.put("mail.smtp.user", d_email);
        props.put("mail.smtp.host", d_host);
        props.put("mail.smtp.port", d_port);
        props.put("mail.smtp.starttls.enable","true");
        props.put("mail.smtp.auth", "true");
        //props.put("mail.smtp.debug", "true");
        props.put("mail.smtp.socketFactory.port", d_port);
        props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
        props.put("mail.smtp.socketFactory.fallback", "false");
        SecurityManager security = System.getSecurityManager();
        try {
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getInstance(props, auth);
            //session.setDebug(true);
            MimeMessage msg = new MimeMessage(session);
            msg.setText(m_text);
            msg.setSubject(m_subject);
            msg.setFrom(new InternetAddress(m_from));
            msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
            Transport.send(msg);
            return "Successful";
        } catch (Exception mex) {
            mex.printStackTrace();
        return "Fail";
    //public static void main(String[] args) {
    //    MailSender blah = new MailSender();
    private class SMTPAuthenticator extends javax.mail.Authenticator {
        public PasswordAuthentication getPasswordAuthentication() {
            return new PasswordAuthentication(d_email, d_password);
}

How to configure the .EAR to the OC4J server step by step ?

I have configured the JavaBean of the OC4J server with the following step:
1.create the eosp.ear with the JDeveloper's wizard
2.copy the eosp.ear to the OC4J Server with the Path:
J2EE_HOME/applications/
3.modify the server.xml and add the following words:
<application name="eosp" path="../applications/eosp.ear" auto-start="true"/>
4.restart the OC4J server and show the information:
Auto-deploying eosp (New server version detected)...
5.create the new JSP and this source code is:
<%@ page import="com.beautybeard.eosp.common.*"%>
<%@ page import="com.beautybeard.eosp.constant.*"%>
6.visit the JSP and show the error information:
Error parsing JSP page /eosp/usr_profile/login.jsp
Syntax error in source/eosp/usr_profile/login.jsp.java:5: Package com.beautybeard.eosp.common not found in import.import com.beautybeard.eosp.common.*; ^/eosp/usr_profile/login.jsp.java:6: Package com.beautybeard.eosp.constant not found in import.import com.beautybeard.eosp.constant.*; ^2 errors
why?
why can not find the package?
please help me out

Hi Sky-
It looks like you have a web application only.
You need to create a war file as described above. A war file is a jar'd file containing your web components, including your javabean class files, etc. JDeveloper 9i can do this for you. You've already done the hard work. Suppose that the project you have created that contains your javabeans, etc in JDev 9i is called myproject (with myproject.jpr as the project file). Right click on the myproject.jpr in the JDev navigator and select 'new...', go to Deployment Profiles and select J2EE Web Module (WAR File) - a general screen will pop up asking you to save the deployment profile (you can just use the default if you want). Once you select OK on that, you will get a screen that calls itself the J2EE Web Module Deployment Profile Settings. This is the screen that you can use to enter your information.
Your servlet and javabean classes will go into WEB-INF/classes subdirectory that you see to your left in this window. Simply select the WEB-INF/classes entry and it will display a list of your java sources (it will only place the compiled output in this directory - there is a toggle for it).
Once you have specified that your javabean and servlet classes go in this directory, you should be set. Go ahead and save / close. In your navigation screen under your project (myproject.jpr or whatever your project name is) you will see your files, jsps, etc and something called webapp1.deploy (if you accepted the default). If you right-click on that, you will get a menu that asks a number of things, one of which is to Deploy to EAR file. Select that entry and it will create an ear file for you. You can play with the various settings to change the name of the ear file, but that's about all you have to do. Once this is completed, you can put the EAR file on your linux box or wherever you want, adjust your server.xml and default-web-app.xml files and launch the app!
Good luck!
Ray
Hi,Ray
Thank you for giving me the detail information!
I'm sorry that I can not give the detail and clear problem ,which make you delusoried.
ok,now I give you my aim.
1. I will construct my application system with JavaBean(not EJB),Servlet,JSPs (linux+IAS+JDeveloper+Oracle8i database)
2. I will package business function with JavaBean. example:
* CheckLogin.java
package com.beautybeard.eosp.javabean.usrprofile;
import com.beautybeard.eosp.common.*;
import com.beautybeard.eosp.data.*;
import java.io.*;
import java.lang.*;
public class CheckLogin{
public CheckLogin()
//do nothing here
public boolean getCheckLogin(){
3. I will control the request and response with Servlets.
example:
*CheckLoginSevlet.java
package com.beautybeard.eosp.servlet.usrprofile;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.sql.*;
import com.beautybeard.eosp.servlet.*;
import com.beautybeard.eosp.javabean.usrprofile.*;
public class CheckLoginServlet extends DefaultServlet
public void service(HttpServletRequest req,HttpServletResponse res) throws IOException, ServletException
//use the JavaBean
CheckLogin cl = new CheckLogin();
if (cl.getCheckLogin){
res.sendRedirect("login.jsp");
}else{
res.sendRedirect("err.jsp");
4. I will display the result with JSPs:
example:
<%//login.jsp%>
<%@ page import="com.beautybeard.eosp.common.*"%>
<%@ page import="com.beautybeard.eosp.data.*"%>
5. I have success on running the above steps in the 9iJDevelper(pure java) environment(OS:Windows 2000 Server), and now I will move the JSPs ,Servlets,JavaBeans to the Server(linux) without the JDeveloper's deployment wizard.
how to configure the IAS to carry my point?
thank you!
Sky liu

How to configure the jdeveloper 11 with .dbc files?

hi, all
i am a new bie here. 4 jdeveloper 10, i can configure the .dbc files at project setting, while 4 jdeveloper 11, it's totally different. i can't find any place to configure it. How to configure the .dbc in jdeveloper 11?
Regards,
Chelsea

You cant use jdev 11g for OAF development..
You need to download the jdeveloper patch from metalink to develope OAF objects.
Refer this metalink note to find the correct version of jdeveloper that you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1
--Prasanna

How to configure the Integration Server Settins?

Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
Mohan

Hi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV

How to configure the XI and PLM in discovery box

How to configure the XI (SLD, Integration repository, Integration Builder ) in SAP discovery system.
And also i want to configure the PLM and xRPM within R/3 of discovery box.
Regards,
Nilesh Damle

Hi Frank,
well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
Greetings,
Ivo

How to configure the MOSS Crystalreportviewer using ActivX

Similar Messages

Maybe you are looking for