How to configure the permission between folders and groups programlly?

Hi guys,
I am developing extension for permission, here I have a question:
I have a template which contains more sub folders, for each folder the corresponding group should be assigned by certain permission. for example: group g1 has "write" permission to folder f1; group g2 has "read" permission to folder f2 and so on. I assign these permissions by extension programlly. But now I have to provide the possibility (to user) to configure these permissions, that means if in future instead of group g1 has "write" permission to folder f1, group g1 has "read" permission to folder f1. This  kind of change should be allowed by extension. Should I set folders and groups as input parameter in an extension, and give the user possibility to input permission type? In another word, my program is supposed to get the permission from GUI and then create ACL. But where can I set the possibility for user to define the permission? And how can I read this permission?
I hope I explained it clearly enough.
Any help is greatly appreciated!
Regards,
Liying

Hi jennifer,
Find this usefull, follow steps at PAGE 3,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
Regards
Juan

Similar Messages

  • How to establish the connection between crm and r/3

    Hi,
    Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
    Could any one tell me where to find adapters and plugins for this.
    Thanks in advance.
    Ajey

    Hello Ajey,
    in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
    B01: CRM Generation
    C71: CRM Connectivity
    B09: CRM Replication
    from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
    Regards
    Gregor

  • How to find the relation between PAY_ELEMENT_TYPES_F and GL_CODE_COMBINATIO

    Hi, could someone tell me how to find the relation between PAY_ELEMENT_TYPES_F and GL_CODE_COMBINATION tables
    that is because as you could know PAY_ELEMENT_TYPES_F holds the definitions of elements in Oracle HRMS and i need to find the accounting code of each element.
    Thanks

    Hi;
    Please check e-trm site for table relation,integration,explanation etc..
    etrm.oracle.com/
    Regard
    Helios

  • How to customize the link between archivelink and Alfresco

    hi,
    We are using Alfresco as content manager and we want to scan the invoices according to the "Late Storage with Bar Codes in FI" scenario [http://help.sap.com/saphelp_470/helpdata/en/46/c4317ffc4b11d195650000e82deb58/frameset.htm].
    Each scanned invoice will be stored in Alfresco as a pdf file and we want to be able to display it from the sap 'display FI document' transaction (thru 'environment' menu / Additional assignments/object links).
    my question is how to make the bridge between sap archivelink and Alfresco for this display ?
    how to customize link between archivelink and Alfresco ? Is it possible with customizing only or is it necessary to buy third party software ?
    we are working in 4.7.

    Hi,
    Apparently you need an interface between SAP and Alfresco that implements SAP archivelink.
    Once that is in place you can configure a repository in OAC0.
    At the link below you find a link to a PDF
    http://forums.alfresco.com/en/viewtopic.php?f=14&t=13502
    Our company had an own content repository software. It used KGS SAPALINK to make the connection with SAP.
    Furthermore CTAC seems to have done development to connect SAP and Alfresco.
    Currently we are looking for a new repository system as well. A couple of weeks ago management decided that within some departments Alfresco will be the standard DMS. It would be great if we could use it as content server as well.
    Kind Regards
    Edmond

  • How to find the link between strcture and query technical name

    Hi Guru's
    How to find the link between Strcture in the query and query technical name. In other way where used list of the structure  used in queries?
    I know we have table called RSZELTDIR which have the values of strcuture name. from here i do not find any link to query technical name.
    Please can anyone help me?
    Regards,
    Sirisha

    Hi ,
    For structure and query relationship, the structure has to be a reusable structure( a global one). Then you can right click in on the structure name (in BEX query designer) and select the where used list. You will find all the query names where it is being used.
    U can also check out tables RSRREPDIR and RSZCOMPDIR for other query properties.
    Thanks,
    Amit

  • How to calculate the difference between intdate and getdate

    Hi,
    My requirement is to get the data for all the claims where the difference between transactiondate and getdate() should be less than or equal to 7 which means any claims that happened in the past week.
    So, my query would be something like this
    select * from claims
    where transactiondate-getdate < 8
    But my transactiondate is in int format such as 20150331 and getdate would be in the format of 2015-03-31. Can someone please help me on how can i achieve the difference between these 2 date formats in the where clause.
    Please let me know if you have any questions or if i am unclear.
    Thanks

    Hi SqlDev12,
    Please find the below condition in your query,hope it would help you
    DATEDIFF(DD,CAST(CAST(TransactionDate
    AS
    VARCHAR)
    AS
    DATETIME),GETDATE())
    < 8
    Thanks & Regards,
    Praveena.

  • How to break the link between photoshop and lightroom when saving a photo?

    I've had an ongoing issue with saving copies of photos I import from LR to PS and back into LR. Any multiple copies I make get erased when they move back to LR. My solution has been to save a copy in an extra folder apart from Lightroom and import them in later. It's rough, but it works. But now I have a new demon.
    I tweaked a photo in LR, made a copy to keep it safe, then sent the copy over to PH where I did some magic. I Saved As in that special other folder, closed the tab, got the usual box asking if I wanted to save the changes (of course I did), I went back to LR to see both the original and copy changed over to the PS version. I went back to PS, opened the .psd, unclicked the mask, clicked the checkbox, when back to LR and both the original and copy in LR had the mask removed.
    I'm missing something here.
    There m u s t be a way to break the link between PS and LR so that when I save a copy of a photo I made in LR the original and copy remain two separate photos. Does anyone know how?
    Thanks,

    I think I am a little confused. What you are describing seems more like a Project Server "Profile" issue, than a SharePoint to MS Project Sync.
    If my guess is correct, then you just need to set the default profile to be something other than your computer.
    If I am wrong, a screenshot of the error would be really helpful.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • Whant is the difference between role and group?

    in fact. a group means the a special role that have no any assigned functions

    Hi Kang
    The difference betwen Roles and Groups:
    <b>Roles</b>
    Roles are the largest semantic unit within the content objects. A role is a folder hierarchy comprising other content objects (worksets, pages, iViews). The contents of a role are based on the company structure and information requirements of the users of a company. Roles are assigned to users. This means that users can only access the content that is relevant for them if they have the appropriate role.
    <b>Groups</b>
    Groups contain users falling under the same catagory. For example let's say that you have a set of roles, <b>role x</b> and <b>role y</b>. You have to assign <b>role x</b> to users of <b>type a</b> (let these be users who can only view your portal and cannot make changes) and <b>role y</b> to users of <b>type b</b> (let these users be administrators). Then you can add the users of <b>type a</b> to a group and assign the <b>role x</b> to them. Similarly you can add the users of <b>type b</b> to another group and assign the <b>role y</b> to them. This rids you of the task of having to assign the two roles to each user type individually.
    Hope you got the difference now.
    Warm Regards
    Priya

  • How to configure the connection between AS JAVA and AS ABAP

    Hello,
    I have installed a SAP Netweaver 7.3 AS JAVA and I would like to connect this JAVA Instance with 3 ABAP Systems (ECC 6.0) .
    On help.sap.com I have found the following instructions: http://help.sap.com/saphelp_nwpi71/helpdata/en/3b/0c4b428f96ab53e10000000a1550b0/content.htm
    Could you please advise, if the above configuration steps are OK?
    Or could you please help me with the exact procedure?
    Thank you in advance!
    Noemi

    Noemi,
    I'm not sure how exactly you want to use ABAP and Java so it is hard to answer your question.
    The link that you posted describes the steps to configure ABAP as a Security Assertion Markup Language (SAML) service provider. As a service provider, the AS ABAP enables you to off-load the authentication of users onto an identity provider. The identity provider enables you to federate identities across domains for Single Sign-On (SSO).
    Check the following wiki page for a good overview of all the ways that you could connect to ABAP
    http://wiki.sdn.sap.com/wiki/display/ABAPConn/ABAPConnectivityHome
    Regards,
    Ventsi Tsachev

  • How to maintain the synchronization between routing and bom in Production V

    We are maintaining the Prod version and assigning BOM and Routing to the prod version.
    But if user does not assign the mentioned BOM to the respective routing and selects the alternative BOM.
    Then how to keep the check the Production Version.
    Is any way to keep the Sync between, Prod version and related BOM and Routing.
    Amit Shah
    Edited by: SAP2511 on Feb 2, 2011 11:56 AM

    Dear,
    Go to T.Code: C223 enter your plant and press enter you will get the details of the all production version You will get Green light for correct PV's
    Select all PV and do the consistency check.
    Regards,
    R.Brahmankar

  • How to tell the difference between 10w and 12w?

    We have:
    2 iPhone 5s
    1 iPad
    1 iPad 2
    1 iPad (4) with Retina
    I know that the iPhones use the smaller 5w charger, but how do I tell the difference between the iPad/iPad 2's 10w charger and the iPad 4's 12w charger? They look exactly the same.
    The iPad 4 takes forever to charge, so I want to make sure I am using the 12w - and I don't want to damage the older iPads by accidentally using the 12w.
    Thanks!

    Read the fine print on the charger. My iPad 2 10W charger says 5.1V 2.1A. A 12W charger should have a higher number for A.
    You can use the iPad 4 charger on your other devices, without damage, to charge them faster.
    ~~~~~~~~~~~~~~
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • How to decrease the gap between label and input field.. pls respnd

    hi friends,
    I am facing this problem since long time and couldnt get any solution...
    pls respnd,
    i need to decrease the gap between my input field and label.. its very much gap there..
    thanks in very advacne,
    niraja

    Hi WD ABAP,
    i am doing the same, created tcontainer, and just binded my node. i given matrix layout. But i dont know why it is coming like that.
    Also WDABAP, could you pls reply me to the other thread,
    about when im trying to read the dropdown value of subnode, the get_static_attribute or create_element method is going into my supplyfunction.
    supplyfunction - my code is to fill the dropdown. and due to this supply function triggering,
    my get_static_att or create_element is not reruting currenct row dropdown value.
    what am i doing wrong.. can u pls pls.. its kicking me. i have spent my whole weekend on this, but couldnt solve this.
    plsfnds :(((((
    Niraja

  • How do solve the compatibility between windows and itunes?

    I can not sign out of itunes from the library.. I click  store tab in the library the sign out. the tab turns black and freezes up. I have to shut down and restart .

    A picture would be very helpful in demonstrating what you are having trouble with.
    Lacking that, I will guess.
    VI Properties >>> Windows Size
    lets you define the minimum size of a FP window.
    Well that's my guess!
    Did I win?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to remove the dust between Lcd and Front glass (Early2009)

    I just bought the new Imac less than 1 month
    then I found the dust over there
    ---Should I go to the apple store????

    You can quite easily remove the glass front, it's only held on with magnets.
    Use either a sucker, like that of a car sat nav or mobile phone holder, or if you dont have that, just get a bit of parcel tape and stick it firmly in the bottom lower corner and gently pull and the glass comes straight out no problems, peel the tape off, doesnt leave a residue then when you've done cleaning offer the glass back upto the frame and the magnets will grab it back into place.

  • How to establish the relationship between component and character

    Hi Gurus,
    I'm using MTO with configurable materials,
    I have create class, character, configurable profile, 
    then i create a sales order using VA01, i enter the FG, and choosed the charaters, but the components do not populated.
    Do you know how to make all components can be populated automatically after the characters are chosen.
    Regards,
    Dragsky

    Hi ,
    Thank you for your response!
    My usage is 1 -production
    Relevant to sales is ticked in CS02
    There is a material A which is working well, i copied material B form A and copied BOM from A.
    so now , i choose Obj.dependencies in BOM item, a message pops up saying:
    Used more than once - can only be maintained centrally
    Message no. CU032
    Diagnosis
    You want to change global object dependencies locally for an object. However, this is not possible, as the object dependencies are allocated to other objects as well. For this reason, you can only change the dependencies globally using dependency maintenance functions.
    Procedure
    Change the object dependencies globally in the dependency maintenance function.
    Regards,
    Dragsky

Maybe you are looking for