How to configure traveling MacBook and airport express

Here is the probelm I am interested in getting help with
I frequently travel with my family with Mac Books and an airport express. When we are at a hotel we dont want to pay for 5 internet connections at the daily rate. So if the hotel has an ethernet wire its easy, I plug in the ethernet wire to the airport express and build my own network. This typically works. The problem comes when the hotel has a wireless network. How can I configure the airport express so that I can create a new wireless network routing the traffic through the single wireless connection that the hotel gives me? If this cant be done with an airport express is there another router it can be done with?
Thanks for any help/advice.

You can setup your Airport Express (AX) as a wireless client connecting to the hotel wireless network. Connect the ethernet port on the AX to your Mac's ethernet port for internet access. Go to System Preferences/Sharing tab, enable internet sharing after configuring "Share your connection from Ethernet" and "To computers using AirPort". Your laptop will act as an access point for your other computers. You may not get blazing speed from the internet since you are splitting the bandwidth, however, this is the lowest cost solution for your dilemma. Remember to set your wireless security before you start sharing your connection or you may have other "guests" connecting to your mini network.

Similar Messages

Choppy YouTube Playback with MacBook and AirPort Express

I recently purchased a brand new 2.1 Ghz Intel Macbook (white) with extra memory and immediately connected it to the internet using the AirPort Express 802.11n. I have experienced no problems thus far except for extremely poor internet streaming video playback. YouTube videos stop to load every few seconds. I didn't have this problem with my old PowerBook G4, and like I said, everything else seems fine - pages load normally and downloads are very quick. I have installed a new version of Flash and done a couple of other suggested tricks but nothing seems to help. Any suggestions?

See http://discussions.apple.com/thread.jspa?threadID=309565&tstart=0

How to connect apple tv and airport express on same Hi-Fi?

Hello everybody,
My question first : Is it possible to output the sounds directly from the Apple TV to my Airport Express (via Airplay, wifi, or whatever connection) and connect with the jack my Airport Express to the stereo? This way I could hear the sound from my tv or listen to my music via airplay the way I want.
Now, the long explanation : I have a Tivoli sound system which only has a Jack as input plug. I also have an Apple TV (2) to watch movies. For my movies, as my stereo doesn't have any optical audio input, I've connected the television directly to the stereo. As I used to listen music from my Iphone on the dock aswell, I installed a double jack adaptor to permit two connections to my stereo (1 for the iPhone dock and 1 for the television).
Now things have changed a bit. I bought an airport express to replace the dock station.
The problem is that I can't use the double jack adaptor anymore. If I want to watch tv I have no sounds from stereo until I unplug the airport express Jack. The reverse works, I can listen to my music when both airport Express and television are connected.
If you have an idea? Let me know.
Thks.
Christophe

....... Is it possible to output the sounds directly from the Apple TV to my Airport Express
Unfortunately not.

ATV2 + iPhone 4 + MacBook Pro + Airport Express

Hi,
I have ATV2, an iPhone 4 (iOS 4.2.1), a MacBook Pro and Airport Express. I have no internet access (dsl or the like) at home.
How can I connect my iPhone 4 to ATV2 and stream videos etc. using Air Play? Do I have to set up a home network first (using my MacBook and Airport Express), and if yes how I can I do that without having internet access?
Please help, I am getting desparate...
Thank you, Nick

You don't need an internet connection to create a wifi network using your AirPort Express and the AirPort Utility (Applications/Utilities/AirPort Utility). Once it's setup, devices that have joined that network will see each other and work with AirPlay but won't be able to access the internet, at least not through wifi.
http://www.apple.com/support/airport/

When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
We also have two iPhones that do use our local wireless network on occassion.
We have stereo speakers that are currently connected into one of the Airport Expresses.
For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express). Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each). So far, here's what we've tried to do:
(1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house. They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely. Spent a couple of hours setting everything up. No dice.
(2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
(3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu). The computer does this at random intervals on a regular basis. The skipping, however, will occur even if the menu is not selected.
(4)     Here's the weirdest part. The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down. In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals. In this situation, the skipping only seems to occur when the menu is selected.
At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it). But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem. I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
Any help would be most appreciated!

Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

How to setup ADSL moden router and Airport Express 802.11n (1st Generation) to provide internet and airplay connections to multiple devices?

I have a Netgear wireless ADSL modem router (wireless + four ethernet out ports) that i'd like to connect to a 1st gen Airport Express to create a small home network to provide internet access for a MacBook, iPhone and Apple TV, and to provide Airplay connection to the Apple TV and Airport Express audio output jack.
I'd like to turn off the wireless function of the ADSL modem router, and to have from one of its ethernet out ports an ethernet cable providing internet directly connected to my MacBooks ethernet port.
Then from one of the other ethernet outs on the ADSL modem router an ethernet cable connected to the Airport Express's ethernet port. This would be to provide wireless internet connection for the Apple TV and iPhone via WiFi from the AE.
At the same time as the MacBook is receviing internet soley via the ethernet in port, i'd like it to have WiFi connection to the AE to provide Airplay connection to the Apple TV and the AE's audio out jack.
Is this all possible? How should I go about to configure this? How should the AE's ethernet port be configured?
Any special modes the ADSL modem router or Airport Express should be in? ie bridge or client?
Thanks

On the ADSL modem router web-based interface, should I set any security setting? I think not as there'll be no wireless signal coming from it, only wired ethernet connections to both MacBook and AE. Security should only be set on the AE to prevent someone from accessing its WiFi signal. Is this assumption correct?
These are all correct!
How should I go about setting up security for this network?
First I would recommend that you configure the AirPort Express for WPA2 Personal. This will provide you with the greastest level of security while still providing excellent bandwidth performance.
You would configure wireless security for the Express by using the AirPort Utility on a Mac, PC, or iOS device. Using your MacBook Pro as an example, you would do so as follows:
Run the AirPort Utility.
Select the Express, and then, click on Edit.
Select the Wireless tab to enable it.
Set the Wireless Security option to: WPA2 Personal
Enter the desired password in both the Wireless Password & Verify Password fields. Note: Use of a "strong" password is encourage here. By strong, I mean use a mix of upper/lowercase letters, numbers, & punctuation marks. Try not to use common dictionary words. If you operate your wireless in an area where security is of an utmost concern, I would further suggest that you change the wireless security password every 60-90 days. Also don't forget to change the default AirPort Base Station Administrator password as well.
Click on Update and allow the Express to restart.

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

I need a new modem. Which modems work well with MacBook Pro and Airport Express?

I need a new modem. Which modems work well with the MacBook Pro and Airport Express?

You need to inquire from your ISP which modems are compatible with their netwrok. They should give you a list.

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

How do airport extreme and airport express routers connect to modems?

I've heard that airport extreme and airport express are wifi routers, not modems. if they are routers, they need to connect to my modem. Do they connect using a wire or wirelessly?

It must be connected to your modem with an Ethernet cable.

Printer not working with Leopard and Airport Express

Hello!
I have seen that this is a common problem but I've tried several solutions that seemed to work for others but still not for me.
I have a Macbook Pro unibody and airport express with OS X 10.5.6. I used a Samsung CLP-300 wirelessly though my airport express (with Tiger on my older macbook). The printer works fine when it is plugged into my USB on the Macbook but not on the airport.
Here is what I've tried in the past 8 months:
- update the Samsung printer driver
- used "fixairport"
- configured HP IP with airport local address
- spent 2 hours on the phone with apple
None of this seemed to work. The printer will print the first page and then any subsequent pages it gives me an error host message.
If anyone can give me an idea of what did work for them in this situation, or maybe I'm doing something wrong, please let me know. It would be greatly appreciated.
Steph

kelscan, Welcome to the discussion area!
You need to reconfigure your AirPort Express (AX) so that it joins the wireless network provided by the "modem". Follow the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
Thanks

No more meseges.
في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
New discussion activity
Bob Timmons has posted in the AirPort community.
How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
To post a reply, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

How to configure traveling MacBook and airport express

Similar Messages

Maybe you are looking for