How to configure trex 6.1 in srm 5.0

how to configure trex 6.1 in srm 5.0

Hi vishal,
Please have a look here :
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/a86642a3423654e10000000a155106/frameset.htm
Kind regards
Yann

Similar Messages

How to configure trex name server

hi all
while creating index i am getting the error
Index could not be created; creating index failed: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
for the above error i need to configure the trex name server using TREX Configuration in the J2EE Engine in j2ee visual administrator .
can any one tell me the clear path that where to configure the above and where j2ee visual administrator installed how to configure the name server
awaiting for replies
regards
ganesh

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

Can anybody explain how to configure the Centralized contract in SRM 7

Hi All,
Can anybody explain how to configure the Centralized contract management in SRM 7 with ECC EHP4 ?what are all that need to be perform in PI system.
Thank you,
praveen

Hello,
PI will be required here. You can also refer the config guides maintained at the belwo mentioned location.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 -> Configuration Guides for SAP SRM 7.0
Best Regards,
Rahul

How to configure TREX to enable search in MDM?

Hi All,
Has anyone configured TREX to enable search in MDM before?
Can it be done?
Please provide help on this.
Thanks
Rajat.

Hi Rajat,
For the configuration of TREX to enable search in MDM, check the below link which gives the complete information of TREX 6.1
Link : https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1545e1bf-0d01-0010-a5ab-f80e574423bf
Hope this would be helpful!!!!!!!!
Regards,
Parul

How to configure TREX so it does not include title in the index created

Hi all
Can someone tell me where I can find the TREX configuration that disables the indexing of the html title. If I for instance want to index www.sap.com, and I do not want the title = "SAP - Business Software Solutions Applications and Services" to be indexed, how do I do that?
If I were to index www.sap.com I would not be interested in getting a hit for all pages when a user searches for "software" or "solutions" for example.
Any help will be rewarded.
Kind regards,
Martin Søgaard

Hi Praveen
Thank you for your post. It was exactly was I was searching for, and it didn't come up on my searches in SAP documentation. As of now it seems to work as intended on our DEV system.
Only thing about the documentation was that I had to change the std.html-config file in the SYS-folder of the TREX installation folder in order for it to work (the std.html-config file was located in two different folders).
Thanks.
Kind regards,
Martin Søgaard

How To Configure TREX Name Server&Port for UDDI Service Registry Settings

Hello Experts,
we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
If I do so, I receive "Connection to TREX not successful".
When I press the Update TREX button I receive this exception:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
I am not sure if the port number is correct -> is there a way to lookup the correct port number?
Is there something else I should configure?
Thanks for help, best regards
Thomas

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

Configuring trex for sap dms

Hi,
We have installed SAP DMS (ECC6.0) to manage some of our documentation. Now we are trying to configure TREX to index and search for those documents, which are stored inside the SAP Content Server. Right now we have the entire technical configuration completed, but we cannot find any documentation that explain us how to go through the rest of the process... We don't know what transactions to call or tables to maintain in order to configure indexes and search functionality. Please note that we use transaction CV04N to search for documents.
Can anyone please provide me information on how to configure TREX?
Thank you.
Kind regards,
Ricardo Inácio

I am facing the same problem: I need some documentation on how to use TREX search in CV04N.
There must be some docs, but I cannot find them.
Thanks in advance
Andy

How to Configure POWL in SRM 7 Shopping Cart

Hi,
Can i know how to configure POWL for SRM7 Shopping Cart
with regards,
Kawrthik.

Hello,
you mix two concepts which make difficult to understand your request.
Screen-shot you gave us in from the Portal (Tasks, Alerts, Notifications and so on...).
With Enterprise Portal, to approve Workitems, your inbox (SBWP transaction) is the Universal WorkList.
With NetWeaver Business Client, you use Personal Object Work List to have access to your inbox.
In this last case, you have to switch the Portal-Independent Navigation Frame (IMG: SAP Implementation Guide > SAP Web Application Server > SAP Supplier Relationship Management > SRM Server > Technical Basic Settings > Portal-Independent Navigation Frame > Activate/Deactivate Portal-Independent Navigation Frame) on.
If you connect to SRM through Portal, you cannot use POWL as inbox.
Regards.
Laurent.

Configuring trex in ccm 2.0

Hi,
We are using SRM 6.0 and CCM 2.0, after creating supplier,master and procurement catalog, and while publishing procurement catalog we realized we have not configured trex, so kindly let us know how to do the same along with anyother details you think will help us in doing the same.

Hi Vishal,
Mail me on
[email protected]
or give yr ID for
TREX setting doc .
BR
Dinesh

Configuring TREX for CCM 2.0

Hi,
We are using SRM 5.0 and CCM 2.0, after creating supplier,master and procurement catalog, and while publishing procurement catalog we realized we have not configured trex, so kindly let us know how to do the same along with anyother details you think will help us in doing the same.
In our case, SRM and CCM are in the same server.
Let me know how to configure it in case both were in different server.

Hi,
Some related links which might be helpful.
sizing SRM 5.0 SLD with XI - hardware
Re: CCM integration with EBP
BR,
Disha.
Pls reward points for helpful answers.

How to use TREX in Netweaver Portals

Hi,
I am new to TREX and i installed TREX 7.0 with Netweaver 2004's java edition and performed Post Configuration for Java client HTTP settings.
Now i am unable how to use TREX in Portals for searching the documents in KM.
Can any one help me how to use the TREX for searching the documents in Km if possible plz attach the screen shots.
ADV Thanks
Regds
Phani

Hi Phani,
You can test your TREX server by executing the following step:
Log on to your TREX server and open up the TREX console which you can find in the TREX program folder. Normally you are now inside the python_support folder.
Execute the following script by typing: "python runInstallationText.py" and hit Enter.
The script carries out the following tests:
● Deleting any test indexes that were generated for a previous script run
● Creating a test index
● Indexing documents
● Testing search functions
● Exact, error-tolerant (fuzzy), and linguistic searches
● Search using Boolean operators such as AND and OR
The results are displayed at the end of the script run. You see the tested calls and their statuses (OK or Failed).
When you run the script for the first time, the call Delete Index has the status Failed. This is because there was no existing text index to be deleted. If this is the only cell with the status Failed, the test was successful.
Below you will see the final output generated by the test script. As stated near the bottom of this screenshot our TREX is running very well or not if there is a problem.
Best regards,
Tom.
PS. Don't forget to reward helpfull answers

Configuring Plant Driven Procurement in SRM 5.0

Dear All,
In our company we have implemented SRM 5.0 Classic Scenario. We are using SRM system for ordering consumable materials through external and internal catalogs. All other materials as raw materials, marketing materials and spare parts are procured in R/3 system.
There is a new business requirement to use SRM system for ordering spare parts through catalogues. Currently, spare parts are planed in MRP in SAP R/3 system, where purchase requisition is generated and after that a purchase order is created manually in the procurement department.
I have investigated how the process can be reproduced in SRM system, but still there are some open questions. Hope, somebody of you can give me some answers.
Generally the process will look like this:
1. The purchase requisitions created in MRP will be transferred as external requirements to SRM Sourcing application.
2. In Sourcing Application purchaser is enabled to use different sourcing functions- to create or assign contract for these requirements, bid invitations or directly to create purchase orders in SRM or in the backend SAP system. Our customer will use it only for creating orders though selecting items from catalogs.
My first question is: Is it possible, for these external requirements, to select the items from existing catalog and to create purchase order in the backend system? And if yes, in which SRM version this could be achieved? I read somewhere, may be in this forum, that items from the external requirements can be substituted by catalog items but only in SRM 6.0 version?
It is also not very clear for me whether I have to activate extended classic scenario in order to configure Plant Driven Procurement.
Thank you in advance,
Best Regards,
Desislava

Hi,
Your suggestion is appropriate for my situation, but still there are some open questions for me:
It is not a problem to maintain internal catalogues for the spare parts and when needed users will create shopping carts manually by selecting parts from the catalogue and PO will be created in SAP backend system as it is for the consumables- that part of the process is clear. But the main question is how we can use this catalogue when spare parts are planed through MRP run, because most of the spare parts in the company are planed in MRP?
In this case, the MRP purchase requisition have to be transferred to SRM sourcing application and from there to replace somehow the items by catalogue items. Is this scenario possible for SRM server 5.5 clasic scenario- I think no?
Anyway thank you for your answer, I will think for a workaround.
Regards,
Desislava
Hi.
Please continue with classic scenario for consumbale material
You can do one thing for the spare parts .Please consolidate the total requirement of spares requirement for 2 to 3 years
prepare a master list with vendor and price (frequently procured)
Publish this in a separate catalgue so that you can use SRM for Spare Parts.
In the mean time which materials is not there in the Catalogue procure manullay thoro 'PR in SAP and you can consolidate next
year and totally you can procure both consumables and Spare Parts
Regards
G.Ganesh Kumar

Documents / Cookbook on how to configure Extended Classic Scenario?

We currently have the Classic scenario and are thinking of changing to exteded classic becuase we want to use the sourcing cockpit in SRM 7.0. Does anyone have any good documentation on how to configured Extended Classic?

Hi Sivakumar,
If you mean how to archive PO in MM side, please refer to the following info:
====
In ECC system, if you want to archive a MM PO, please use transaction
SARA->archive object MM_EKKO.
456129 FAQ: Archiving in purchasing
401318 Archiving: Additional information
====
If you want to delete this ECC PO, please use BAPI_PO_CHANGE and
refer to the following test data:
Parameters:    PURCHASEORDER      = XXXXXXXXX
Parameters:    POITEM
PO_ITEM                        = 00010
DELETE_IND                     = X
Parameters:    POITEMX
PO_ITEM                        = 00010
PO_ITEMX                       = X
DELETE_IND                     = X
You also need to run BAPI_TRANSACTION_COMMIT after BAPI_PO_CHANGE for updating the change.
Regards,
Ivy

Error in configuring TREX 7.0

I have installed TREX 7.0 and CRM 5 on different machines. When I configuring Trex in stand-alone trex-admin-tool according to TREX manual, I get error message "RFC Destination could not be created " and error in log:
>TS> Fri Dec 15 12:55:23 2006
T:2916 ======> Name or password is incorrect (repeat logon)
T:2916 <* RfcReceive [2] : returns 3:RFC_SYS_EXCEPTION
but I can login with SAP GUI using this login and password.
Any solutions how to make it work?
Thanks.

Hello, thanks for your replay.
That is my TrexRFcServer.ini:
#configfile for TREXRfcServer
[CONNECTION]
USE_QUEUESERVER=NO
SEARCH_MAXHITS=0
USE_REPLICATION=NO
HOST=sapdevsrv1
INSTANCE=sapgw06
[ccms]
record = on
satracer = JarmLike
[trace]
default = error
trexrfcsvr = error
trexrfcdll = error
filename = trace/TrexRfcServer
maxfilesize = 10000000
maxfiles = 10
maxlines = 0
alertwriter = SimpleAlertWriter
alert = error
alertfilename = trace/TrexRfcServerAlert
#SAPTraceLevel = 4
#formatter = LogViewerFormat
#writer = LogViewerFormat
[communication]
listenport = 30007
maxchannels = 200
maxendpoints = 20
[global]
reconnect_interval=360
[thread_Trex_CR5_20061215172929@sapdevsrv1:sapgw06]
#INFO *** SAP System:CR5, RFC Destination:TREX_CCR5, local GW. Section inserted: 2006-12-27 16:30:03 by AlertServer Check.
host=sapdevsrv1
instance=sapgw06
service=Trex_CR5_20061215172929
instances=1
What i have to change to use GW on server with my SAP system ?

How to configure trex 6.1 in srm 5.0

Similar Messages

Maybe you are looking for