How to configure tuxedo to work on server having NAT

I want to my application to the tuxedo . from a remote location , the server on which the tuxedo is installed has a NAT on it . I have updated the WSl port and th IP in the tpinit properties file but still i wam unable to establish a connection to the tuxedo . Pease help me

When you connect to a Tuxedo application from a remote server, you need to take care of 2 things:
1. If there is a firewall between the client and the server, you need to open up the WSL port and ALL the WSH ports in the firewall.
2. If there is a NAT (either in the firewall or otherwise) between the client and the server, you need to use -H option with WSL. To understand this, briefly, this is how the work station connection in Tuxedo works -
- Client connects to WSL
- WSL assigns the client to a WSH, and returns WSH's port/address to the client.
- Client now uses the info received to connect to the WSH.
For this to work under NAT, WSL has to send NAT-ed address to the client. To make it send NATed address, you need to use -H option and give the translation information to WSL. If you dont, the address sent by WSL wont be a valid one for the client to connect to.
Hope this helps.
-Niranjan

Similar Messages

How to configure Time-sheet in Project server 2013 please share the doc with screen shot

How to configure Time-sheet in Project server 2013 please share the doc with screen shot
Thanks and Regards, Rangnath Mali

Hi,
Please refer to the following Youtube video and article.
https://www.youtube.com/watch?v=lZWvg4q17JE
https://support.office.com/en-sg/article/Set-up-timesheets-and-task-status-672fa06f-8c4b-4e43-bfbc-4c355d681605
Please don't forget to mark it answered, if your problem resolved or helpful.

How to configure Sun Java System Application Server Enterprise Edition 8.1

hi all,
How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
I have installed jes for my windows system.. so that i have removed platform version of Application Server..
I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
but i couldn't;

Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.

How to configure Ogone for working with business catalyst ?

How to configure Ogone for working with business catalyst ?
In france ogone seems to be the only solution for seamless payment and there's no explications on the forum to configure it.
Thx for your answers

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

Need assistance how to configure RDS on a standalone Server 2012 R2 not joined to a domain

Hi,
I need help on how to configure RDS on my standalone server 2012 R2 that is not joined to a domain. I would also like to see the counterpart of Terminal Services Manager.
I am familiar with Terminal Services on my old Server 2003 which I migrating.
Thank you for your assistance.
Sincerely,
Ramon

Hi,
the dedicated RDS/TS forum is here:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverTS
Some useful articles, which seem to answer your questions:
http://support.microsoft.com/kb/2833839
http://ryanmangansitblog.com/2013/10/30/deploying-a-rdsh-server-in-a-workgroup-rds-2012-r2/
http://support.risualblogs.com/blog/2014/03/10/setting-up-a-2012-r2-rds-gateway-for-a-workgroup/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Osb 11 : How to configure tuxedo business services in a clustered domain.

Hi,
We have a platform with a clustered domain Osb ( 1 admin server and 2 managed servers dispatch on several physical servers) and two Tuxedo instances offering the same service exported in 2 different gateways on each Tuxedo instance.
How to configure a business service with tuxedo transport working on this platform with failover and load balancing ?

Thanks for the answer but it doesn't work.
The fact is that we work on OSB 11, not directly in WebLogic.
And Osb always modify the WTC configuration even if we modify it before in weblogic.
To define a business service with multiple remote access points and apply a load balancing algorythm, Osb need an URI for each remote access point (not for each imported service).

How to configure solman for Workflow BW Server.

Dear Experts,
How to configure Solution Manager workfolw for BW sever. We have done for R/3 systen . it working fine.
Regards,
Anand Mehrotra.

Hi
might be this helps, this is the basic set up if you use bw server
[http://wiki.sdn.sap.com/wiki/display/Basis/BIReportingforSolutionManagerEWA_ConfigGuide|http://wiki.sdn.sap.com/wiki/display/Basis/BIReportingforSolutionManagerEWA_ConfigGuide]
jansi

How to configure Gamil SMTP in Project Server?

In Project Server Alert Settings, I could notice only "smtp Server" , "port" and "from email" only, I want to use my "Gmail" or "Sendgrid" smtp setting in epm. In order to use those accounts i need a place
to key in the account password. But i don't see any place to do that. Some one could you please help me how to configure this, Do i need to enable / install anything in order to make this work.
Your reply is much much much helpful, and appreciated.
Thanks

Hi Jacob,
Your email provider needs to accept unauthenticated connections.
Please refer to this
similar thread and this
one also.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to configure SOA in Integrated WLS Server for JDEV 11.1.1.1.0

Hi,
I am trying to deploy a SOA Application but it says No SOA Configured targets found. How can I configure SOA on Integrated Weblogic Server in JDeveloper.
Thanks

Okay, so the Admin server controls the connection. Is there a screen that shows this? My JDev is reporting that the soa server does not exist, though the WebLogic administrator shows that it's there.
I have checked the AdminServer.log and the soa_server1.log files and found nothing that would indicate an error. I also noticed there is something called a Work Manager. wm/SOAWorkManager This guy is pointing to just the soa server.

How to Configure Remote Connections To SQL Server 2008 R2 Express

Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!

My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
            // netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo

How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow

Dear Experts,
I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP.
The registered domain name is e.g. contoso.com.
a. What should I use as domain name on AD? contoso.com or contoso.local
b. Is it recommended to have two different servers for AD and Exchange?
c. What should be my connector settings for mail flow?
d. how can I set 2 email servers in company for load balancing?

Hi,
a, I suggest use contoso.com as domain name. It is convenient to add urls into our certificate for internal and external mail flow.
b, Recommended that installing AD
and Exchange Server on two separate
Servers. If Exchange Server downed unfortunately, it can prevent AD server from crushing at the same time.
c, Found some articles for your reference:
Configure Mail Flow and Client Access
http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
Configuring Outbound Mail Flow in Exchange Server 2013
http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
d, Load Balancing
http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

How to configure JMS queue on OC4J server. Development in JDeveloper 10G

Hi there,
I have to configure a JMS for an Asynchronous process in my Application which will be running in Oracle 10G Application Server. Development Environment is Oracle JDeveloper 10G.
I am facing a problem on how to configure JMS queue.
Steps Followed are:
in the <JDevloperHome>/j2ee/home/config
1. Made the new queue and connection factory's JMS entry in jms.xml.
2. Specifed the queue in oc4j-connectors.xml.
3. played around with application.xml
and tried all combinations, but the message producer always failed to lookup the queue.
Need help on the steps to follow so that the producer can post the message in the queue.
Also please help how to configure the MDB to listen to the queue.
Thanx and Regards
Subham

If you were dealing with Oracle 10g app server as opposed to standalone, I might be better able to help you.
One thing though, when you are configuring your MDB in the orion-ejb-jar.xml file, do not forget to specify attribute listener-threads, otherwise no matter how many beans you have in your MDB pool, only one bean will be listening to the queue. Many listener-threads equal to max number of beans in pool.

How to configure webutil in oracle application server 10g (9.0.4)?

hi,
i want to configure webutil for oracle application server 10g(9.0.4).
how should i start?
i have read the webutil mannual.it is bit tricky.
i want step by step configuration.
Any sort of help is appriciateable.
Regards,
abbasyazdani

hi,
In webutil directory structure,there r four folders,
{color:#0000ff}doc
java
server
webutil{color}
and there are three files.
{color:#0000ff}webutil.pll,webutil.old and create_webutil_db
{color}
In webutil mannual,it is written that we should extract this folder to forms90.
But in forms90, there are {color:#0000ff}server and java folders.
{color:#000000}should i replace forms90's sever and java folder with webutil's server and java folder?
what should i do for this ?
regards
abbasyazdani
{color}{color}

How can configure scope options in dhcp server

Good Night Partners.
I need configure scope options in dhcp server on mac mini.
i dont know how to do.
its my first mac and i confuse.
Can anybody help me please.

Are you referring to DHCP Option Codes? If so then this can be done with the DHCP server included with Mac OS X Server. However Apple do not provide a tool for doing this nor for encoding the values in the required format.
What you will need to do is edit the DHCP Server configuration file manually using a text editor. This configuration file is located at /etc/bootpd.plist before you do this I advise having a read of the Unix man page for bootpd (the DHCP server software Apple use).
You can use a utility I have written to generate the required information and then paste this in to /etc/bootpd.plist it can be downloaded from -
http://web.me.com/jelockwood/MyUtilities/dhcp.html

How to configure USER CAL on SQL server 2008

how to configure or Add User CAL on SQL server 2008?
pls let me know the process

Hello,
There is no CAL management in SQL Server, you have the licenses only "on paper".
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to configure tuxedo to work on server having NAT

Similar Messages

Maybe you are looking for