How to configure ur mailbox

man i have a huge problem on hand. I have my hotmail mailbox as my most important mails come in that mailbox. Now the question is how can i configure my e90 using its default mail severs being imap4 and pop3 to configure my hotmail account.
Secondly I would also know my entire call time of my phone as it gets reset every time i go in software updates.
Fast reply would be appreciated.
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.
Solved!
Go to Solution.

Have you received from Microsoft the correct POP3 or IMAP4 server names, as well as their SMTP server name + any port and other security settings they might require?
If you have all the details from Microsoft, then create a new mailbox in the Messaging app, and enter them there.
Note that sometimes network operators require you to use their SMTP server, and do not pass traffic through the network to other SMTP servers.

Similar Messages

  • How to configure a Office 365 email on SAP BI 4.1SP05 server to send scheduled reports by email ?

    Hi All,
    I am trying to figure out how to configure office 365 server on BI platform so that I can send scheduled reports by Email.
    Below are the system details:
    SAP BI 4.1 SP05
    Microsoft Office 365 Email account
    I referred to the SCN post for configuring gmail.
    I could easily configure my gmail account.
    I tried same logic with Office 365. Instead of using port 465 (for gmail) I used port 995 (for office 365).
    That didnt work.
    I also tried using port 587 for TLS authentication but that doesnt work either.
    SMTP Link for office 365:  smtp.office365.com
    For simplicity purposes, I have opened all the ports on the firewall and server.
    Please let me know if I have missed anything or if my whole approach is incorrect ?
    I am open to suggestions and workarounds.
    Thanks,
    Prathmesh Pai

    Hi there,
    When the order is saved, the system will call the mail ID maintained in SU01 of the user.
    It will then trigger the mail to the regular outlook mailbox.
    Else in some cases a new Z table is defined to maintain the mail IDs. System will trigger the mail through outlook. It has that inbuilt capability.
    Just ask your user to check his mail box to see if he has received the mail.
    Regards,
    Sivanand

  • How to configure users for internal mail routing only

    Hi Guys!
    I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only (cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex. [email protected],[email protected],[email protected]) instead they will use the [email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
    Thank you.
    regards,
    LRMCP

    Hi LRMCP,
    Procedure is perfect which is given by Benoit, just elaborating steps.
    Prevent form Sending Mails:
    Create a transport rule on Hub Transport Server:
    Organization Configuration -> Hub Transport -> Transport Rules -> New Transport Rule -> Give Name “Group2 - No Internet Mail”
    Conditions: select "From a member of a distribution list" & select group "Group2"
    Select another condition "Sent to users inside or outside the organization" & Select Outside.
    Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”
    Prevent from Receiving Mails:
    New User: You can select “require that senders are authenticated” while creating new users which will stop receiving mails from internet.
    User -> properties -> Mail Flow Settings -> Message Delivery Restrictions -> Properties -> set Sender Authentication.
    For Existing Users:
    You have already a group named "Group2" so set sender authentication for all members with this single command.
    Get-DistributionGroup "Group2" | Set-Mailbox -RequireSenderAuthenticationEnabled $true
    Same procedure mentioned for group2 can be followed for Group3 to prevent from sending mails.
    Amit Tank || MVP - Exchange || MCITP - Exchange 2007 || http://ExchangeShare.WordPress.com

  • How can I transfer mailboxes from one computer to another?

    How can transfer all mailboxes(and their contents from one MBP to another? Migration assistant was no help.

    Select all your mailboxes, and then select
    Mailbox ▹ Export Mailbox...
    from the Mail menu bar. Export the mailboxes to the Desktop folder. Transfer them to the new machine.
    On the new machine, import the mailboxes:
    File ▹ Import Mailbox...

  • How to configure oracle listener profile for multiple oracle database

    Hi,
    I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
    I'd like to know how to configure listener in this kind of envirnmonent.
    a. use two listener and different ports
    b. use same listener but different ports
    c. use same listener and same port
    Which is the correct mothed?
    And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
    Please advise.
    Thanks a lot.
    Regards,
    Alex

    Hi,
    standard installation is creating new configs for listener for each instance.
    I would recommend to use one listener per each instance.
    YOU CAN NOT HAVE one port number for two differnet systems!
    If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
    For example PORT= 15<system number>
    Peter

  • How to configure one TREX host with multiple index servers ?

    Hi All,
    Does anyone know how to configure TREX on the one host,
    with multiple index servers ?
    Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
    our KM content for portal users.
    I am using TREX 7 and have not been able to do this,
    despite reading the Single and Distributed install
    documentation.
    Any help would be appreciated.
    Regards,
    Andres

    Hi Andres,
    To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
    Proceed like this:
    1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
    2. In TREXdeamon.ini go to
    [daemon]
    references sections below
    programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
    and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
    3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
    Go to the last two columns and move the indexes (move master here/secondary mouse click)
    If you don't distribute the indexes the new index server process will be regarded when an new index is created.
    Hope this helps!
    cheers
    Bettina

  • How to configure request manager service for multiple website in one web application

    I have set up sp 2013 as below:
     web application : wa1
    site collection : sc1
    sp site: site1, site2
    I used 2 WFE, 1 APP, how can I use request manager service to control  site1 to wfe1, site2 to wfe2?
    Awen

    That's not what i'd describe as load balancing.
    A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
    fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
    This article shows how to configure the RMS and may help show how your request is difficult to configure:
    http://www.harbar.net/articles/sp2013rm2.aspx

  • How to configure 3 different members under a single Month column

    Hi SAP Gurus,
      My client requirement is to show the report in following format, where under a Month column 3 different columns having
    1) Quantity (Number of unit ) of a product,
    2) its rate (Amount per unit), and
    3) Total (amount)    will appear in a single report.
       I have Month as a Time Dim, while Qty, Rate and Total are members of account dim.
    Que: How to configure such scenario in a single report?
    Jan.2011
    Product Category:            Qty (Input)   Rate (Input)   Total (Output)                    
    Product 1                                               
    Product 2                                             
    Product 3                                             
    Product 4                                             
    Group1                                             
         Where: Total = Qty X Rate                                        
    Thanks and Regards,
    SouarbhD

    Hi,
    Use an EVDRE to create your input schedule. You need to have one row with products and 2 columns with time and account. Choose the memberset options as per the requirement. For the accounts, is total calculated with a dimension formula? If yes, then you just need to enter the values for quantity and rate and send the data. The total will be calculated by the system and will be displayed automatically.
    Hope this helps.

  • How to configure an Alert message if communicationChannel(JMS) stops

    All,
    Is there a way how to configure an alert when the communication channel stops.
    <b>Scenario:</b>
    In the path Runtime workbench->Component Monitoring->Adapter Engine->Communication Channel monitoring, if we see that a communication channel has stopped(RED traffic light as Status), then can we trigger an alert notification for same.
    Currently we have alrerts configured for any message/s failure in the JMS Adapter Framework. So can we trigger simmilar alerts when a comm channel stops(for whatever reason).
    Thanks in advance
    RK

    Hi Sreeram,
    Thanks for the quick reply.
    We have a scenario where we activate individual channels at a given time. So in this case, Adapter will always be in RED as all queues are never running in our scenario.
    So we need an ALERT to be triggered for individual comm channels. Is theer any way that you can think of ?
    Thanks and regards
    RK

  • How to configure multiple IP addresses on one NIC?

    Hi,
    I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
    All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
    Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
    So any advice is well appreciated.
    Thanks!
    Regards,
    Marek Hubatka

    You should be able to do this by using "VLAN Groups".
    http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
    Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces.

  • IAS 10.1.2-how to configure different oc4j listen to different virtualhost?

    Hi
    I have requirement,
    we have oracle portal based web site that can be used by outside users over the internet.
    And then we have are deploying few new apps/webservices/ear files on a oc4j called core_ws. These web services should not be accessed outside.
    I have created a virtaul host in apache on a different port(7799) which was not exposed to public world.
    But, how to configure core_ws to inform Apache to listen on only port 7799 but not on port 80?
    I tried a diffent route to attack the problem(as mentioned below) which managmenet did not like:
    created location directive, worked in dev but not in production as there ISA sitting front of apache.
    We could apply filter on the URLs of these web services in ISA but my director did not like the idea as each time there is additional web service we have mess with it.
    So, he prefers running these web services on a different port that will not have access to public.
    Appreciate your help if have acheived the same earlier.

    By your description, it sounds like you want to do what is in this My Oracle Support document:
    How To Create Virtual Host Specific OC4J Applications (Doc ID 389819.1)
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=389819.1
    (requires login)
    You said you were using 10.1.2, so that will work, its a method of creating separate virtualhosts and using rewrites to direct to error pages if an incorrect request is made. For 10.1.3, but there is a dynamic method which is a better approach.
    ...Ken

  • How to configure sync with my local ftp server?

    I have used XMarks since now because it hallow me to synchronize my bookmarks with my local server. Now XMarks don't work anymore because it's not more possible to synchronize the passwords.
    Any other alternative imposes to use an external server and I don't want to use an external server. My data must remain on my machine it's absolutely excluded that i use an external unknown server for this.
    The only solution must be a free solution (a real free solution) and the firefox synchronization seems to me the best/only one.
    But I've not found how to configure it to use my own server.
    So how to do it, where are the options to the synchronizer to give my own ftp server or whatever other server it needs?

    iAS 6.0 sp4 officially does only support iPlanet Directory Server 5.0 sp1 and 4.13.
    For more details visit: http://docs.iplanet.com/docs/manuals/ias/60/sp4/ig/prep.htm#42084
    I guess, you can specify the directory server during the time of installation.
    Thanks,
    Rakesh.

  • ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

    I have ASA 5505 8.4.  How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
    Or as something else to implement it?
    My configuration for SLA monitor:
    sla monitor 123
     type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
     num-packets 3
     timeout 3000
     frequency 10
    sla monitor schedule 123 life forever start-time now
    track 1 rtr 123 reachability

    Hey cadet alain,
    thank you for your answer :-)
    I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
    Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
    3
    Nov 21 2011
    18:29:56
    77.xxx.xxx.99
    59068
    80.xxx.xxx.180
    80
    TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
    The attached file is only the show running-config
    Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
    Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
    Regards.
    Chris

  • I want to set up the Time Machine and I would love to use the Time  Capsule but since I already have a wireless router I need suggestions on  what other external disks Apple could recommend to use with the Time Machine and  how to configure that disk

    I want to set up the Time Machine and I would love to use the Time
    Capsule but since I already have a wireless router I need suggestions on
    what other
    external disks Apple could recommend to use with the Time Machine and
    how to configure that disk.
    A complication that I need to resolve is the fact that I am using Vmware
    Fusion to be able to use Windows on my Mac. Now it seems that Time
    Machine is not backing up my files
    on that virtual Windows without additional configuration and my question
    is whether you can advise me here or whether this is only a matter for
    the Fusion virtual machine.

    If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
    You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas  series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
    Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
    TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
    You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

  • Don't know which technology to utilize or how to configure ASA5505

    I have an ASA5505.  Currently, it is using static NAT on several ports to forward traffic to several devices inside my network.  It is a pain not only to configure but from the end user side.
    The issue I am having is the applicatoins I am using to access the devices become a mess with dual configurations, one for when I am connected to the internal network and one for when I am away from the office and accessing from the internet.  For example, I have 2 Cisco VC240 IP Cameras behind the ASA5505.  One is set use port 9091 and the other 9092.  When I am inside the office, I access them via http://10.1.2.215:9091 and http://10.1.2.216:9092.  But when I am away from the office, I have to have another configuration in an Android app to use them, http://external_ASA_IP:9091 and 9092 and then NAT 9091 to the object for Camera1 and 9092 for Camera2.  This is only one scenario.  I also have a UC320W that I would like to put an IP phone at home and it sounds like AnyConnect is the only way to do this.
    It sounds like to me that if I use some type of VPN, I can access the same devices using the same IP whether internal or external with the external connection using the VPN to tunnel the IP to the local network.  There seems to be quite a few ways to do this with an ASA 5505.
    AnyConnect seems like the way to go but after reading Cisco documentation, it requires your Android device to be root'd if it is not a particular Samsung model.  If I understand correctly, root'ing your phone voids the warranty.  I know it is common practice but would think Cisco would have a better solution as I am sure Cisco would not want another manufacturer telling their customers to void the warranty on their Cisco equipment in order to get it to work.
    I believe I can just use IPSEC and use the native VPN of the Android OS and also tunnel L2TP as the Android supports IPSEC-PSK/L2TP or IPSEC-CRT/L2TP.  But will either of these will support the IP phone to the UC320W?
    A friend also told me to use NginX to proxy URL's so the URL http://www.fqdn.com/camera1 gets proxy'd to the internal IP of Camera1 and http://www.fqdn.com/camera2 gets proxy'd to Camera2.  He says I should be able to store a cookie on the phone and let the phone authenticate to the camera and if the phone cannot, the proxy can authenticate internally to the IP camera over SSL.
    I don't know anymore, I am so confused and just want to simplify my life as I am just a small business with me and a couple other employees but I have full-time job and it is not IT/Network Technician, it is only CTO/CEO/CIO/CFO.  I don't have hours upon hours to set this up and test and I don't have hours upon hours to manage it.  I just need to simplify this and have so that it is a set-it-and-forget-it for 6 months to 1 year and re-evaluate or update.  So, if someone suggests IPSEC, I would not know how to configure anyway and you should expect another post.  The same for AnyConnect or any of the other suggestions.
    Thanks in advance for any advice.

    Hi!
    1. Set Calculation Mode property of ITEM_5 to Formula.
    Formula property:
    nvl(:Block_Name.ITEM_1, 0) + nvl(:Block_Name.ITEM_2, 0) + nvl(:Block_Name.ITEM_3, 0) + nvl(:Block_Name.ITEM_4, 0)
    OR
    Function_Name(Param_1,... Param_N);
    Have in view of, that the ITEM_5 data will not be saved in DataBase.
    2. When-Validate-Item trigger is usfull when is necessary to store calculated item data in DataBase.
    Rename you Post-Query trigger to When-Validate-Item.
    Modify trigger: Store calculation result in the variable.
    (Don't forget to round variable value!)
    Then compare it with ITEM_5. If they are different - :ITEM_5 := var_name.
    I prefer the first method.

Maybe you are looking for