How to configure USB camera if it is not Directshow image

Hi, 
I am using NI-IMAQ for USB to grab videos from Dazzle DVC170 of Pinnacle. There is an error showing system error, see the attached file. Someone answered that it is because my USB device is not a directshow image one. In fact, Dazzle DVC 170 connects camcorders with computer. There is Svideo output connecting camcorder and a USB connecting computer. If in this case, VISA can be used to configure USB and grab video? Thanks. 
Solved!
Go to Solution.
Attachments:
error2.JPG ‏100 KB

Hi,
For firewire connection, there is no connection on my camcorder but S video output connection. I am wondering if we can buy a firewire card to transport video and use IMAQ for USB to control this firewire or other IMAQ module to control it. In fact, I went to Bestbuy to ask about this. But the sales person told me that the firewire card can only transport video but can not be controled. I am wondering the problem with firewire card is there is no driver for this so we can not control it. Is it right?
Thanks.

Similar Messages

  • How can I USB camera with Excite AX-15?

    I want to use the USB micro-scope camera( http://www.dino-lite.com/products_list_minute.php?product_number_abridge=AM7013MT ) with my Excite AX-15. Can I use a UVC standard camera with my pad?

    What phone do you have, and what ROM (the factory default or a homebrew one)? Is your phone rooted? And what setup are you using for network management on your computer?
    Using the stock HTC ROMs (1.5 as well as 2.1), my HTC Hero shows up as a USB modem in NetworkManager when USB teethering is enabled on the phone (the same should be the case with other Android phones from HTC with the Sense UI). I'm not sure how it works with other setups, such as WICD, but with NetworkManager it 'just works'.
    As far as I know, the same should be the case when the native USB teethering in Android 2.2 is activated. However, not all 2.2 ROMs support the feature, even though the menu option is present -- e.g. the FroydVillain ROM I'm currently using (the same goes for some 2.1 ROMS, such as VanillaEclair pre version 5.0, where the menu option was present but in effect did nothing).  If that is the case, you can try the Android Wired Teether app -- or, if that does not work, Azilink to share your phone's internet connection through VPN.
    The azilink soultion is more or less bound to work no matter what, but it takes some effort to set up (i.e. getting ADB running and configuring OpenVPN). There's a quite informative thread on it in the Ubuntu Forums

  • How to configure SSO for web dynpro ABAP (not web dynpro Java)

    Hi Experts,
        I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
    1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
    2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
         procedure"
       Then deleted all logon procedure other than "SSO Authentication" and saved.
    3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
         signal).
    4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
    After all this settings I opened a browser enter above URL and hit enter but there is an error
    There is no login page. It directly showed this error page. No cookies is saving.
    Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
    How to set the for single sign-on?
    Thanks in Advance
    Regards
    Piyush

    Hi Piyush,
    Pls refer below links,
    Single Sign On with ABAP WebDynpro
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
    Regards
    K.N

  • How do I fix camera shutter that will not open?

    Learning to work with the I Pad...newbie. Camera stopped working, I think shutter has frozen. How do I fix this?

    Try closing the Camera app:
    1. Double-click the Home button to reveal the Task Bar
    2. Hold down the Camera app for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Tap area above Task Bar to return to Home screen
    If the above doesn't solve the problem, do a reset:
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

  • How to disable usb, firewire and pcmcia support in 7sp1ir1 imaging engine

    hi all,
    does anyone know if it's possible to disable usb, firewire and pcmcia support in the 7sp1ir1 imaging engine to spped up loading the engine? We don't need any of these in our environment...
    Thanks, Lothar

    Lothar,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • How do I get the default zooming to not include images or how can I resize everything but actual images?

    I have a problem with the default zooming in firefox Using default layout.css.devPixelsPerPx=-1 or layout.css.devPixelsPerPx=1.5 makes all UI and webpage text look nice and readable, spacing is fine and everything. The only problem is that images are ALSO zoomed which is ridiculous. I guess I would like a way to scale everything BUT images. I have a hi-resolution monitor and think it's silly to have to zoom out every image on a web page just because I wanted text and the UI enlarged. I tried NoSquint using 65% for pages and 150% for text only, but that had the issue of making ONLY text scaled up and not spacing and other stuff (google searches looked even more silly using only 6 cm to the left, rows too close overwrote themselves etc.)

    That is not possible.
    The layout.css.devPixelsPerPx pref affects everything in Firefox, both the user interface and the browsing area.
    'Full page zoom' affects all elements on web pages including images and 'zoom text only' affects the text and can cause issues with text overlapping or disappearing similar to setting a minimum font size because the containing element keeps the same dimensions.
    You can't just exclude the images from zoom and have the containers expand automatically.

  • Using web cam with skype but not receiving image from PC

    I've just downloaded skype and asked my son to do the same as we got nowhere with messenger, in the hope to be able to chat to him and see each other. He can see me but I cannot see him and his webcam says "error in trying to connect to ...'. Is this something to do with his webcam or the fact that I am using a Mac?

    Check with the folks at Skype.

  • How to configure http server in oracle 10g

    Hi
    I am configuring apex 3.2.1 on oracle 10g 10.2.0 I need help how to configure http server bec i did not find any Apache file or folder in 10g if it is then how .
    Arshad

    Hi
    I use to configure only this in $ORACLE_HOME/forms/server/forms.conf (and restart ias):
    AddType application/x-orarrp rrp_
    AddType application/x-orarrp-text rrpt
    AddType application/x-orarrp-ps rrpp
    AddType application/x-orarrp-pdf rrpa
    AddType application/x-orarrp-rtf rrpr
    AddType application/x-orarrp-html rrph

  • 4S: How do I keep camera in regular mode with "Invert Colors" to on?

    On an iPhone 4S w OS7.1, how do I keep the camera in regular mode (not negative image) and keep the "Invert Colors" swith to active or pink or (1).

    " (1) how do I transfer the files from my PowerBook G4 to the nano? "
    In disk mode the Nano will mount on the desktop like any removable dive, just drag the files you want onto it
    "(2) How would I transfer them back again if I ever need to?"
    Drag them back from the Nano to your computer
    "(3) should I try to go back and find out if "optimizing" was completed, and finish it if it wasn't? How?
    You would probably need to restore it to factory settings to start the process again
    "(4) How do I keep the nano from automatically updating from my music files when I charge it"
    You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box. It won't update automatically in manual mode. You can also remove the tick from the box which says "Open iTunes when this iPod is attached".

  • Can AnyOne Please Tellme How to configure the HTML files

    This is very Urgent.
    1.I am using the WLS7.0 sp1 .I need to configure theHTML files which are in a
    different path how can I map them to the present DefaultWebAPP directory.
    2. How can I get rid of the port number when I am fully using in production mode.
    I have been posting this query since long but in vain. Please guide me

    1. I got rid of port number with link provided by the karthik.
    2.How can I create a link .The link appends to the defaultwebapp directory
    and checks from their .I need to know how to configure the
    HTML files which are not in the DefaultWebApp.But completely in directory.
    Any suggestions !!!!!!!
    Shehzad <[email protected]> wrote:
    1. You can create a link to that directory
    2. In order to get rid of port number, either boot weblogic at default
    port 80, or use Apache or Iplanet webserver, and use Weblogic plugin.
    That way all the traffic comming in from http will comein at port 80
    to the webserver, and would then be forwarded to Weblogic at whatever
    port it is booted.
    This is very Urgent.
    1.I am using the WLS7.0 sp1 .I need to configure theHTML files whichare in a
    different path how can I map them to the present DefaultWebAPP directory.
    2. How can I get rid of the port number when I am fully using in productionmode.
    I have been posting this query since long but in vain. Please guideme

  • How to create a plugin to stamp texts and not an image into a pdf document

    How to create plugin to stamp texts and not an image.. i just want it to work like the stamper plugin found in sdk sample but here i need text to be stamped instead of an image.. Is it possible? kindly give me some ideas?how to go about it.. can this be done by modfying the stamper sample code?
    Thank you

    This is possible, but it is a serious project, not something to be cut around from sample code. You will need to study the "graphics" and "text" chapters of the PDF specification in some detail to understand the PDF graphics model, including colour spaces, graphics state, and transformation matrixes; if working with annotations understand them and the requirement for appearance stream. There are various ways to add content to a PDF, but the PDFEdit API is probably the most accessible.

  • How to capture an image from my usb camera and display on my front panel

    How to capture an image from my usb camera and display on my front panel

    Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
    Christian

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • How can I use a USB camera with cRIO 9022. Please see my strange problem.

    Hi,
            I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window.  Please see JPEG File 3 where I get NO ERROR.
            I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
    1) Create a NEW PROJECT
    2) Add Targets and Devices(NI cRIO 9022)
    3) Use the Scan Interface mode
    4) Create a NEW VI under the cRIO 9022 device 
    5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
    6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
    I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
    Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
    NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
    Thanks.
    Amar.
    Attachments:
    NI Vision Acquisition Express Error for NI cRIO 9022.JPG ‏39 KB
    IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG ‏82 KB
    NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG ‏48 KB

    Only GigE comms are supported on the cRIO Real Time OS. Have a look at the following:
    Machine Vision on NI CompactRIO and Single-Board RIO
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

    I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

    *Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

Maybe you are looking for

  • Itunes changes my icons

    Why when I download itunes does it changes all the icons on my lap top to itunes......i have to uninstall to correct this

  • Help with ActionScript/PHP email form

    Hey guys, hope someone can help me out with this! Haven't programmed in a while, but a friend asked me to look at this and figure out why it isn't working. It's a simple form, with the text boxes labeled inTxt_1, inTxt_2 ..... inTxt_13. The ActionScr

  • Cash Journal using business transaction

    Hi Can I create two cash journal with one Petty cash account. The purpose is I want to give authorisation for entering cash journal , these person will use only one business transaction & would like to create another cash journal with same GL account

  • Print vs. digital image integriy

    The preview and the print of a digital image in my Library are distorted from the original image. In particular, faces are noticeably elongated. It gets worse when the image is cropped before printing. What can I do to fix this problem.

  • I have a Macbook Pro less than a year old running slow

    I have a macbook pro that is less than a year old and it's running pretty slow.  This is the first Mac I've ever had and always heard they are great and never get viruses.  The software versions in OS X 10.8.1. Does anyone have any ideas what it coul