How to configure user preferences for each platform
Currently i dual boot Kubuntu and windows 7 and use a single profile that is shared by both the OS's. The problem is that some changes such as auto-scrolling, double click to copy url text are disabled/configured differently in linux to what i like. I can manually enable auto scrolling in linux, but when i switch to windows and then switch back it is disabled again.
Is it possible to make a user.js file that sets preferences based on the operating system, eg: user-windows.js, user-linux.js or something like that? I know I can use different profiles for each OS, but it requires keeping all the addons/bookmarks in sync everytime i switch, which i do atleast a couple of times a day.
hello, with the mozilla.cfg file in the firefox program folder you can set preferences independent of the profile: http://kb.mozillazine.org/Locking_preferences
edit: these functions can be used in the mozilla.cfg file:
defaultPref(); // set default value of a preference
pref(); // set pref, allow changes during session
lockPref(); // lock pref, disallow changes
Similar Messages
-
How to configure different listener for each database in 11gR2 RAC
Hi Friends,
Current Prod Setup :
11gR2 (11.2..0.2) RAC on RHEL 5.5 with 3 SCAN Listeners on default 1521 port.
Having 4 databases which are using SCAN-IP and listening on default port only.
As per policy, we have to create separate listeners (on different port) for each database.
like,
DB1 - 1522
DB2 - 1523
DB3 - 1524
DB4 - 1525
Even If I configure 4 listeners using NETCA, how my failover & load balancing will happen using SCAN & Newly Created Listeners ???
Thanks in advance..
Regards,
ManishHi,
I tried on 11gR2 TEST RAC Server to have different listener with different port (1529) for SCAN & Node Listener & tested failover, load-balancing which was successful.
[oracle@ravish5 admin]$ cat listener.ora
LISTENER_A=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_A=ON # line added by Agent
[oracle@ravish5 admin]$ ps -ef | grep lsnr
oracle 1985 1 0 00:46 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER -inherit
oracle 1988 1 0 00:46 ? 00:00:00 /11g_database/11.2.0.2/product/home_1/bin/tnslsnr LISTENER_A -inherit
oracle 2928 1 0 01:00 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER_SCAN1 -inherit
[oracle@ravish5 admin]$ lsnrctl status LISTENER_A
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 02-MAY-2012 03:19:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))
STATUS of the LISTENER
Alias LISTENER_A
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-MAY-2012 00:46:42
Uptime 0 days 2 hr. 32 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /11g_database/11.2.0.2/product/home_1/network/admin/listener.ora
Listener Log File /11g_database/11.2.0.2/diag/tnslsnr/ravish5/listener_a/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_A)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.5)(PORT=1529)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.16)(PORT=1529)))
Services Summary...
Service "TEST" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "TESTXDB" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "srvc_test.clover.com" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter listen
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=192.
168.3.16)(PORT=1529))))
remote_listener string ravish-scan:1529
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
[oracle@ravish5 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521,1529
[oracle@ravish5 admin]$ srvctl config scan
SCAN name: ravish-scan, Network: 1/192.168.3.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /ravish-scan.clover.com/192.168.3.22
[oracle@ravish5 admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
Name: LISTENER_A
Network: 1, Owner: oracle
Home: /11g_database/11.2.0.2/product/home_1
End points: TCP:1529
[oracle@ravish5 admin]$ srvctl config service -d TEST -s srvc_test.clover.com
Service name: srvc_test.clover.com
Service is enabled
Server pool: TEST_srvc_test.clover.com
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: true
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: TEST1,TEST2
Available instances:
TEST_NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ravish-scan.clover.com)(PORT = 1529))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = srvc_test.clover.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Actually different ports for different databases are required to have separation of duties. Once Firewall enabled betwen Client & DB Server only privileged users would have access to particular database.
Regards,
Manish -
How to allocate disk size for each user in iMac?
Hi folks,
I have iMac (Mac OS X, version 10.7.5) for Family, and each of my family member has account on it.
Now, kids download many large files (several GB size files) and HD is getting full.
So, I'd like to set maximum disk size for each user.
Could you prvide instruction how to configure disk size for each user?
Regards,
HiroI don't know of any way to do that by user.
I used to partition my HD and that sets a hard limit by partition, but by user? I don't think it can be done. -
How to configure Email notification for User login's in Exchange Infrastructure?
How to configure Email notification for User login's in Client Machines?
Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham -
Create unique user profiles for each separate session
Hi,
How can I configure TS environment so that each user (who logs onto Windows using the same generic Windows user ID) gets their own unique Windows user profile.
For example, imagine a scenario where the users are logging onto Windows using the shared user "SYSTEMAPP"
The intention is to configure the TS server's Windows, so that it creates unique user profiles for each separate session, for example:
- SYSTEMAPP
- SYSTEMAPP.000
- SYSTEMAPP.001
- SYSTEMAPP.002 (etc...)
The server version for TS is Windows Server 2012 and not joined to AD. User IDs are created at Local Users and Groups.
Kindly advise.Hi Susie,
Just to illustrate my point further. Let's say a user logged into the server using user ID SYSTEMAPP for the first session. So, if
you browse the folders in the server, you'll be able to see this:
C:\Users\SYSTEMAPP
Then, another user logged into the same server as SYSTEMAPP user using other session. In this case, my intention is to configure the
server to create another unique user profile as below:
C:\Users\SYSTEMAPP.000
Subsequently, if more users logged in using the same account, the unique counter number will keep on adding...
C:\Users\SYSTEMAPP.001
C:\Users\SYSTEMAPP.002
C:\Users\SYSTEMAPP.003
Previously, I checked from my third party software vendor that this can be done but I still cracking my head on this which is why led me
to this forum.
Kindly advise. -
Qry:How to get different price for each price list (variable area) in order
1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen -
How to configure User domain in Weblogic Application Server 8.1 from Command prompt on windows Xp?
Thanks in Advance.<p>
You can use WLST or weblogic.Admin command. WLST is the recommended appraoch. Here are a few links for both of the above:
</p>
<p>
http://edocs.bea.com/wls/docs81/admin_ref/cli.html
http://e-docs.bea.com/wls/docs91/config_scripting/using_WLST.html
http://edocs.bea.com/wls/docs90/config_scripting/domains.html
http://dev2dev.bea.com/blog/hoos/archive/2005/09/what_no_wlst_1.html
http://dev2dev.bea.com/pub/a/2005/01/wlst_offline.html
http://dev2dev.bea.com/blog/hoos/archive/2005/10/environment_pro_1.html
</p>
<p>
Hussein Badakhchani
London Middleware
</p>
Edited by hoos at 01/07/2007 3:50 AM
Edited by hoos at 01/07/2007 3:51 AM -
How to print multiple footers for each page in RTF template xml report.
Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here. -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
How to create a PR for each Maintenance Order
Dear All,
Please guide me how to create a PR for each Maintenance Order.
I test on Ides, I have some Maintenance Orders, all of them require the same stock material. When I run MRP, system always create one PR for all requirements. I don't know how to change.
Regards,
QuangDDHi,
As you planning for Stock Items, by running MRP, system will create single PR only. If it is non stock items, then it would be possible to create different PR based on Orders.
Regards,
Maheswaran. -
How to configure release procedure for rate contracts release
Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
if c1 is not there c2 has to be approved
Change in the value of the rate contract contract
Change in the validity of the rate contract
Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskarHi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES -
How to configure Broadcast messaging for IC Webclient profile
Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ramHi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha -
How to create user group for EIS (Executive Information System) KCBA
Dear Experts,
How to create user group for EIS (Executive Information System)
TCode KCBA
Regards
SaurabhHi ,
Check the below link ,hope it will give some inputs for creating groups.
http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
Regards
udayakumar.k -
How to use User exit for MM_MATBEL
Hi
I want to exclude some material documents while archiving a range of material document through archive Object MM_MATBEL.
Can you please suggest how to use user exit for this to exclude the material document while archiving.
Please brief me details.
Thanks,
DebadattaHi Debadatta,
Welcome to SDN.
Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
Hope this will help.
Regards,
Ferry Lianto -
How to give user authorizations for a Program or an ICF service
Hi,
1)How to give user authorizations for a report program or an ICF service.
2)How to create an user authorization object.
Regards,
Vinay.check this online help for more info on authorization object creation
http://help.sap.com/saphelp_nw04/helpdata/en/52/67168c439b11d1896f0000e8322d00/frameset.htm
for question no1.
ICF - you either maintain the auth obj relevant at the icf service level itself or you can code call authority object and block access
for abap programs:
you maintain auth object at the tcode or code the call authority object within the program
Regards
Raja
Maybe you are looking for
-
Calendar server 5.1.1 integration with PS 6.0 ??
Is there a out of box service which helps to integrate PS6.0 with Calendar Server. I'm looking for something like a Netmail service which integrates with Messaging server easily ?? Thanks.
-
Problem: Input must be in the format _____ in SPAD
Hello everyone .. (sorry for my english) I want to create a new page format with size in decimal, for example: width = 255.5 mm .. but i get error : Input must be in the format _____ ... I am going to TX SU01 and click in tab Defaults, i probe with a
-
How can I edit my PDF file on cloud?
I cannot figure out how can I edit my PDF file on Acrobat Pro cloud version.
-
Filesharing w/ two Dual 2.5 G5s using eithernet: What am I doing wrong?
Hello everyone. I'm trying to setup a computer-to-computer ethernet connection between two Dual 2.5Ghz G5's, both running OS 10.4.6, however I am running into problems. I've never done this before, so I may be missing something very simple, so please
-
User exit or badi after 'SAVE' of VA41 OR VA42
Hi, What is the user exit or BADI that going to be triggered after clicking the 'SAVE' button of create service order ( VA41) and after clicking the 'SAVE' button of 'VA42'. I am searching, but not able to find. Regards Badari