How to configure webserver plugin for IIS to fwd request to multiple server

Hi,
Have configured Sun One webserver plugin for IIS is configured as per the documentation - http://docs.sun.com/source/816-7156-10/agplugin.html
Have a requirement to forward the request to three different servers
Eg : http://www.host1.com/app1
http://www.host2.com/app2
http://www.host3.com/app3
Getting bad gateway error when this is configured in sun-passthrough.properties file
serverpool1.server=http://www.host1.com
serverpool1.passthrough=/app1
serverpool2.server=http://www.host2.com/
serverpool2.passthrough=/app2
Is this configuration wrong?
Thanks

First, set the user back to www or whatever it was. To do namebased virtual hosting, you'll need to change two things. The first is to add a NameVirtualHost directive to /etc/httpd/sites/virtualhostglobal.conf
This is one of the VirtualHost stanzas from my Linux box, you just have to adjust the paths for your machine:
<VirtualHost www.mydomain.com>
ServerAlias mydomain.com
ServerAdmin [email protected]
DocumentRoot /usr/people/httpd/html/www
<Directory /usr/people/httpd/html/www>
Options Includes
AllowOverride AuthConfig
</Directory>
ScriptAlias /bin /usr/people/httpd/cgi-bin/www
ScriptAlias /cgi-bin /usr/people/httpd/cgi-bin/www
</VirtualHost>
Restart Apache and you should be good to go. If there are errors, could you post them from /var/log/httpd/error_log ?
Roger

Similar Messages

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

How to download java plugin for safari browser of my ipad

How to download java plugin for my safari browser of iPad..

Welcome to Apple Support Communities
I'm sorry, but Java isn't compatible with the iPad

How do I get plugins for PSE 11

how can I get plugins for PSE 11 ie. DNC etc

Hi,
Do you mean DNG? - it is not a plug-in, it is a standalone application.
Which camera does the raw images come from (make & model)?
Brian

How to configure Email notification for User login's in Exchange Infrastructure?

How to configure Email notification for User login's in Client Machines?

Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,

hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.

How to configure IPS 4240 - K9 to send log file to syslog server

I am looking for the commands in how to configure IPS 4240-k9 to send log file to SYSLOG server. If anybody has or came across similer issue please advice.
Thanks in advanced.

Ali -
I am sorry to tell you, but the Cisco IPS Sensors do not send Syslog messages. Your only options for sending signature event information are:
SDEE (an TLS Encrypted XML formatted message) the sensor is the SDEE Host and your event receiver (MARS, IME, Intelitactics, etc) is the client.
SNMP Traps - You need to set the "Action" on each signature you want the sensor to send a trap.
- Bob

How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created ?

Dear Abapers,
I request the Abapers kindly reply for this blog
I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ?
I checked in SE03 transaction the transport request was there. But I want to retrieve the existing transport request which is not moved to Quality?
Is it possible to retrieve the existing transport request in development which is not moved to quality ?
Like how we retrieving the programs using versions in development server, In the same way I want to retrieve the sapscript layout in development server ?
Thanks & Regards
Muzeebur Rahiman.S

Hi,
There is no version management for SapScript or Smartforms .
When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
cheers
Jānis

OBIEE 11g - How to configure Virtual IP for servers hosting OBIEE 11g

Hi,
I have 2 Linux servers.
I have installed OBIEE 11.1.1.6 on first server and did a scale out on second server.
I don't have a Load Balancer.
I want to configure Virtual IP for these hosts.
Please advise how to do it.
Thanks
Nitin Aggarwal

Refer to below lhks.
http://www.rittmanmead.com/2008/12/obiee-high-availability-the-bi-server/
http://www.rittmanmead.com/2009/02/obiee-high-availability-presentation-services-and-scheduler/
Thanks
Jay.

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
     username = apps
     document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
     username = merge
     document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
     Application Framework Agent
     Applications JSP Agent
     Applications Web Agent
     Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
*     <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
*          <jta-data-source>myJtaDataSource</jta-data-source>*
*     </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below :     <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
     <provider>org.hibernate.ejb.HibernatePersistence</provider>
                  <properties>
               <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
               <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
               <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
               <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
            </properties>
     </persistence-unit>
</persistence>Can you please tell me why is it so ??

How to configure Oracle SSO for forms and apex

Hi All,
I am trying to configure oracle SSO for forms and apex using third party external authentication. Please help me how to configure. I a have tried all possible things
from web but I am not able to do it. Is there any doc or links are much appreciated.
Info: Some reason my oiddas web link is not working it used to work fine before and also the from /pls/orasso/ link I am not able to login may be because of my oiddas issue
Thanks

Hi Andreas,
Thanks you for your help. I am trying to implement third party external LDAP authentication for APEX and Forms.
So I started with OID and SSO setup to create external Partner Applications. Some reason my oid and sso web login links are not working. I didn't find any errors. I need some help in finding the problem and direction, I already read docs on web but no proper direction. I appreciate your help.
Thanks

How to configure Oracle SSO for OBIEE

Hi all
Can anyone help me saying how to configure Oracle Single Sign-on with OBIEE?
Basically I want to enable a common login for Dashboard and answers using SSO.
I am using OBIEE 10.1.3.4 on a Redhat Linux
thanks in advance

Hi...
See this, hope this what you want...??
If not .. ignore...
Thanks & Regards
Kishore Guggilla

How to configure SNMP agent for Oracle 10g

Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
Carles

Hello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles

How to configure internet proxy for portlet builder

Hi All,
We have downloaded the portlet builder from developer.bea.com. But while trying
to access xmethods for adding web service, it can't access as the internet connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this portlet
builder ?
TIA,
Sudarson

Hi, I got the same problem...I try to configure a web service with Portal Builder
7.0 in Bea E-Business Control Center... But I can not proceed cause there is no
hint for a proxy... Have you found a solution?
"sudarson" <[email protected]> wrote:
>
Hi All,
We have downloaded the portlet builder from developer.bea.com. But while
trying
to access xmethods for adding web service, it can't access as the internet
connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this
portlet
builder ?
TIA,
Sudarson

How to configure webserver plugin for IIS to fwd request to multiple server

Similar Messages

Maybe you are looking for