How to configure windows 2003 x64 server to run CFUSION MX7

1.If you install Internet Information Services (IIS) on a
computer that is
running Windows Server 2003 x64 Edition, IIS must be
configured to run in
32-bit emulation mode. To do this, follow these steps on each
front-end Web
server that is running Windows Server 2003 x64 Edition:a.
Click Start,
click Run, type cmd, and then click OK.
b. At the command prompt, move to the
%drive%:\Inetpub\Adminscripts
folder. Note that %drive% is the drive on which Windows
Server 2003 is
installed.
c. In the Adminscripts folder, type the following command,
and then
press ENTER:
cscript adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64
1
Note The value "1" for Enable32bitAppOnWin64 specifies
32-bit mode.
The value "0" specifies 64-bit mode.
d. Type iisreset, and then press ENTER.
e. Close the Command Prompt window.

Thank you sir.
BTW, if this enables 32 bit emulation mode, does that mean it
runs both 32 bit & 64 bit extensions, or just 32 bit
extensions?

Similar Messages

Oracle ODBC Driver (Windows 2003 x64 Server)

Hi all
I have some trouble with this ODBC Driver ...
I have installed Oracle Client 10.2.0.1.0 with the ODBC Driver and SQLplus etc.
Now I have configured in the "Net Manager" some "Service Naming" as I did
on other servers before. Then I Test the connection in the "Net Manager" it
seams to work fine.
When I now try to connect in SQL Plus the following error comes up:
ORA-12154: TNS:could not resolve the connect identifier specified
I did already do this:
- Add "...\NETWORK\ADMIN" to the Path Variable of the server
- sqlnet.ora looks like:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
- tnsnames.ora looks like:
MyName.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myDomain.net)(PORT = 1521))
(CONNECT_DATA =
(SID = DBSIDxx)
What do I have to do to get this working ???
Thanks for any comments!
Best regards
Frank Uray

Nevermind, I think I'm to assume that this is the same as:
Re: unable to use SQL Plus (Windows 2003 x64 Server)

Unable to use SQL Plus (Windows 2003 x64 Server)

Hi all
I have some trouble with tnsname.ora ...
I have installed Oracle Client 10.2.0.1.0 with the ODBC Driver and SQLplus etc.
Now I have configured in the "Net Manager" some "Service Naming" as I did
on other servers before. Then I Test the connection in the "Net Manager" it
seams to work fine.
When I now try to connect in SQL Plus the following error comes up:
ORA-12154: TNS:could not resolve the connect identifier specified
I did already do this:
- Add "...\NETWORK\ADMIN" to the Path Variable of the server
- sqlnet.ora looks like:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
- tnsnames.ora looks like:
MyName.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myDomain.net)(PORT = 1521))
(CONNECT_DATA =
(SID = DBSIDxx)
I am accessing like MyName.WORLD ...
What do I have to do to get this working ???
Thanks for any comments!
Best regards
Frank Uray

1) Please verify that there is only one tnsnames.ora file on your system.
If there are several (other than in 'samples' directories), please make them all look the same and try again.
2) If not, please post the contents of your tnsnames.ora AND sqlnet.ora files.
Message was edited by:
forbrich
Re-read your original message and noteiced you posted the tnsnames.ora stuff.
Your alias is 'MyName.world', therefore you want to access using the connect string such as
SQLPLUS system/[email protected]
If you want to use SQLPLUS system/password@myname (no .world) then either remove it from the alias or add the default_domain info in sqlnet.ora

SQL Developer on Windows 2003 x64 Edition "failed to initialize..."

I am trying to run sqldeveloper on Windows server 2003 x64 and I get the following error:
The application failed to initialize properly (0xc0000018). Click on OK to terminate the application.
I get this error with the version with jre, and with the version without the jre.
I have Java 1.6 installed on that server (applet shows up under x86 control panels)
I can reproduce this on two different win 2003 x64 servers, but it works fine on a windows 2003 standard (32 bit)
Any idea how to fix this?
thanks.

This might not be the right place to post this question, but will give it a shot . . .
I've installed JDK 1.5 and downloaded/unzipped SQL Developer on my Windows 2003 x64 server, then launched sqldevelper.bat from the advice given above -- but I get an error saying:
'java' is not recognized as an internal or external command,operable program or batch file.
I made sure I have java installed:
C:\Program Files (x86)\Java>dir
Volume in drive C has no label.
Volume Serial Number is A86A-1831
Directory of C:\Program Files (x86)\Java
03/29/2007 07:29 PM <DIR> .
03/29/2007 07:29 PM <DIR> ..
03/26/2007 06:01 PM <DIR> j2re1.4.2_12
03/29/2007 07:24 PM <DIR> jdk1.5.0_05
03/29/2007 07:25 PM <DIR> jre1.5.0_05
03/29/2007 07:29 PM <DIR> jre1.5.0_11
What am I doing wrong, that would cause 'java' is not recognized as an internal or external command,operable program or batch file?

Oracle 11.1.0.7.0 patch 5 for windows 2003 x64.. Please help.

Hello All
I have Oracle EE 11.1.0.7.0 running on Windows 2003 x64 server plus ASM, and I want to apply patch 5, so that it becomes 11.1.0.7.5.
I came to know from Oracle Support Services, Windows patche comes as bundled patchset, but I am not sure which patch to apply, there are 38 of them. Is 11.1.0.7.5P the correct one?.
Patchset Avaialble:
11.1.0.7.0 Patch 38 (11.1.0.7.38P) 32-Bit Patch:11741169 64-Bit (x64) Patch:11741170
11.1.0.7.0 Patch 37 (11.1.0.7.37P) 32-Bit Patch:10636464 64-Bit (x64) Patch:10636465
11.1.0.7.0 Patch 36 (11.1.0.7.36P) 32-Bit Patch:10350787 64-Bit (x64) Patch:10350788
11.1.0.7.0 Patch 35 (11.1.0.7.35P) 32-Bit Patch:10245099 64-Bit (x64) Patch:10245101
11.1.0.7.0 Patch 34 (11.1.0.7.34P) 32-Bit Patch:10168052 64-Bit (x64) Patch:10168056
11.1.0.7.0 Patch 33 (11.1.0.7.33P) 32-Bit Patch:9773817 64-Bit (x64) Patch:9773825
11.1.0.7.0 Patch 32 (11.1.0.7.32P) 32-Bit Patch:9930894 64-Bit (x64) Patch:9930895
11.1.0.7.0 Patch 31 (11.1.0.7.31P) 32-Bit Patch:9846179 64-Bit (x64) Patch:9846180
11.1.0.7.0 Patch 30 (11.1.0.7.30P) 32-Bit Patch:9869911 64-Bit (x64) Patch:9869912
11.1.0.7.0 Patch 29 (11.1.0.7.29P) 32-Bit Patch:9718019 64-Bit (x64) Patch:9718020
11.1.0.7.0 Patch 28 (11.1.0.7.28P) 32-Bit Patch:9707661 64-Bit (x64) Patch:9707665
11.1.0.7.0 Patch 27 (11.1.0.7.27P) 32-Bit Patch:9604444 64-Bit (x64) Patch:9604446
11.1.0.7.0 Patch 26 (11.1.0.7.26P) 32-Bit Patch:9523179 64-Bit (x64) Patch:9523181
11.1.0.7.0 Patch 25 (11.1.0.7.25P) 32-Bit Patch:9392331 64-Bit (x64) Patch:9392335
11.1.0.7.0 Patch 24 (11.1.0.7.24P) 32-Bit Patch:9384493 64-Bit (x64) Patch:9384497
11.1.0.7.0 Patch 23 (11.1.0.7.23P) 32-Bit Patch:9264211 64-Bit (x64) Patch:9264214
11.1.0.7.0 Patch 22 (11.1.0.7.22P) 32-Bit Patch:9166858 64-Bit (x64) Patch:9166861
11.1.0.7.0 Patch 21 (11.1.0.7.21P) 32-Bit Patch:9082702 64-Bit (x64) Patch:9082709
11.1.0.7.0 Patch 20 (11.1.0.7.20P) 32-Bit Patch:9025140 64-Bit (x64) Patch:9025144
11.1.0.7.0 Patch 19 (11.1.0.7.19P) 32-Bit Patch:8928976 64-Bit (x64) Patch:8928977
11.1.0.7.0 Patch 18 (11.1.0.7.18P) 32-Bit Patch:8832980 64-Bit (x64) Patch:8832986
11.1.0.7.0 Patch 17 (11.1.0.7.17P) 32-Bit Patch:8783655 64-Bit (x64) Patch:8783657
11.1.0.7.0 Patch 16 (11.1.0.7.16P) 32-Bit Patch:8689191 64-Bit (x64) Patch:8689199
11.1.0.7.0 Patch 15 (11.1.0.7.15P) 32-Bit Patch:8655458 64-Bit (x64) Patch:8655460
11.1.0.7.0 Patch 14 (11.1.0.7.14P) 32-Bit Patch:8603948 64-Bit (x64) Patch:8603952
11.1.0.7.0 Patch 13 (11.1.0.7.13P) 32-Bit Patch:8553512 64-Bit (x64) Patch:8553515
11.1.0.7.0 Patch 12 (11.1.0.7.12P) 32-Bit Patch:8508245 64-Bit (x64) Patch:8508247
11.1.0.7.0 Patch 11 (11.1.0.7.11P) 32-Bit Patch:8451592 64-Bit (x64) Patch:8451598
11.1.0.7.0 Patch 10 (11.1.0.7.10P) 32-Bit Patch:8416539 64-Bit (x64) Patch:8416540
11.1.0.7.0 Patch 9 (11.1.0.7.9P) 32-Bit Patch:8343061 64-Bit (x64) Patch:8343070
11.1.0.7.0 Patch 8 (11.1.0.7.8P) 32-Bit Patch:8297200 64-Bit (x64) Patch:8297201
11.1.0.7.0 Patch 7 (11.1.0.7.7P) 32-Bit Patch:8260294 64-Bit (x64) Patch:8260301
11.1.0.7.0 Patch 6 (11.1.0.7.6P) 32-Bit Patch:8219259 64-Bit (x64) Patch:8219268
*11.1.0.7.0 Patch 5 (11.1.0.7.5P) 32-Bit Patch:7712568 64-Bit (x64) Patch:7712570*
11.1.0.7.0 Patch 4 (11.1.0.7.4P) 32-Bit Patch:7682184 64-Bit (x64) Patch:7682189
11.1.0.7.0 Patch 3 (11.1.0.7.3P) 32-Bit Patch:7664953 64-Bit (x64) Patch:7675231
11.1.0.7.0 Patch 2 (11.1.0.7.2P) 32-Bit Patch:7586190 64-Bit (x64) Patch:7586195
11.1.0.7.0 Patch 1 (11.1.0.7.1P) Only available in 32-Bit Patch:7540527
Any help would be great.
Regards
Amit

Hi All
I have applied this patch 38 for Oracle 11.1.0.7.0 on Windows 2003 x64 bit server today but the database version from v$version didn't change at all and still its showing 11.1.0.7.0, I expected it to show 11.1.0.7.5.
Any suggestions.
Regards
Amit

Spool server on Windows 2003 x64 ?

Hi,
I'm installing SAP NetWeaver PI 7.1 on Windows 2003 x64 with MaxDB.
Printing Guide for SAP NetWeaver PI 7.1 states "For a Microsoft Windows XP host, choose access method C. other Microsoft Windows operating systems are not suitable for local printing, as you cannot set up a spool server on them."
However, by default, there is a spool server defined in my installation of SAP NetWeaver PI 7.1 on Windows 2003 x64. But I see plenty of "Spool / print: Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')" errors in the system log when the background processes run every night.
Printing Guide for SAP NetWeaver 7.0 talks about a SAP spool server running on "the Microsoft Windows NT/Windows 2000 system", suggesting that Windows systems other than XP are supported for local printing.
Is that correct? i.e. Has local printing support for Windows 2003 been removed in PI 7.1 ?
I'm surprised, and more than a little confused by this. I'd appreciate any help/explanation.
Regards,
Mark

Just a follow-up if anyone's interested...
I did try setting-up Access Method C in my NetWeaver 7.1 on Windows 2003 x64 with MaxDB and so far the local printing seems to be working OK. So, either:
a) The Printing Guide for SAP NetWeaver PI 7.1 is wrong on this issue.
b) The Printing Guide for SAP NetWeaver PI 7.1 is right, and this is an undocumented behavior that might break in the future.
c) I just got lucky (and I shouldn't look a gift horse in the mouth).
Also, Access Method G works fine.

CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

Hi,
I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
Any help on these problems will be appreciated.
Thanks
Best Regards,
Ahmed

Hi Rohit,
Thanks for reminding the HTTPS option under Administration Control on ACS.
I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
Thanks
Best Regards,
Ahmed

Windows 2003 Terminal Server, ZEN 7, and WSUS

Hi,
We're having a problem getting a group policy to "Stick" in Windows 2003
terminal server. The server(s) have the ZEN 7.01 agent installed per
the TID's for a terminal server. We believe we've set all the Group
Policies of the users that login to these systems, yet once they are
rebooted, the WSUS update server location resets to the default
(update.microsoft.com). This is set in gpedit in:
\computer configuration\administrative templates\Windows
Components\Windows Update
Is this settable in a user package, or should this be done in a
workstation package? If so, could we "force" the workstation package to
override the Windows Update settings for all users, regardless of what
user policy package they have?
Thanks for any ideas!
Greg

In the Properties of the WS Group Policy, there is an option to set "Loop
Back" so that the Computer GPO is set last.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"Greg Palumbo" <[email protected]> wrote in message
news:rFFZk.5166$[email protected]..
> Hi,
>
> We're having a problem getting a group policy to "Stick" in Windows 2003
> terminal server. The server(s) have the ZEN 7.01 agent installed per the
> TID's for a terminal server. We believe we've set all the Group Policies
> of the users that login to these systems, yet once they are rebooted, the
> WSUS update server location resets to the default (update.microsoft.com).
> This is set in gpedit in:
>
> \computer configuration\administrative templates\Windows
> Components\Windows Update
>
> Is this settable in a user package, or should this be done in a
> workstation package? If so, could we "force" the workstation package to
> override the Windows Update settings for all users, regardless of what
> user policy package they have?
>
> Thanks for any ideas!
> Greg

Proper installation on Windows 2003 - SQL Server - SSIS Package

We are attempting to access an Oracle 10g database from a SQL Server 2005 installation through SSIS (Windows 2003 x64). Our admin has installed the Oracle 11g client tools, we are developing in VS2008 (on XP x86). We seem to be connecting to the server through VS, but when running the package on the server we get errors as follows:
Executed as user: <domain\sqlagentid>. ....00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 4:06:01 PM Error: 2008-09-29 16:06:05.97 Code: 0xC001000E Source: Description: The connection "{03AFE9D8-A2E4-4C3C-9EDF-77603B9A7C1C}" is not found. This error is thrown by Connections collection when the specific connection element is not found. End Error Error: 2008-09-29 16:06:06.69 Code: 0xC001000E Source: <package_name> Description: The connection "{03AFE9D8-A2E4-4C3C-9EDF-77603B9A7C1C}" is not found. This error is thrown by Connections collection when the specific connection element is not found. End Error Error: 2008-09-29 16:06:06.69 Code: 0xC001000E Source: <package_name> Description: The connection "{03AFE9D8-A2E4-4C3C-9EDF-77603B9A7C1C}" is not found. This error is thrown by Connections collection when the specific connection element is not found. End Er... Process Exit Code 1. The step failed.
We suspect the issue is in the initial installation steps. (BTW - we used a TNSNAMES.ORA that worked on our local machines.)
Can anyone help?

The errors you are showing are Microsoft errors not Oracle errors. You should take this up with Microsoft support.

SGA_TARGET SIZE 3GB in 10g Release 2 server on windows 2003 E Server?

Is it possible to increase the SGA_TARGET greater than 3 GB on Windows 2003 Enterprise server(32-bit)?
OS version : Microsoft Windows 2003 R2 Enterprise Edition
Service Pack 2
Bit Version : 32 bit
Computer(SERVER) : Intel(R) Xeon(TM) CPU 3.60GHz
3.59GHz, 15.5 GB RAM
Physical Address Extension
DataBase Version : Oracle 10g Release 2 (10.2.0.1.0)

hi,
As suggested earlier , please go through following notes as it will help you understand the concepts clearly
Note:342080.1. This note talks in detail on how to use more than 4GB RAM on Windows.
Note:225349.1 Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
You can not set SGA_TARGET greater then 2.7 G on windows 32 bit machine. Yes , you can have SGA greater then 3 Gb but by using AWE which requires to unset SGA_TARGET and use db_block_buffers instead of db_cache_size.
-Amit
http://askoracledba.blogspot.com/

Netweaver 04 on Windows 2003 x64 (amd64)

Hi all,
Can anybody tells me where I can find the corresponding Installation Master Software and the SAP Kernel 6.40 Unicode for installation on Windows 2003 x64 (amd64).
I can not find it on the SAP Marketplace myself.
On the PAM (Product Avalability Matrix) the software should be available but I can not find it.
Please help. It becomes very urgent.
Kind Regards
Paul VAn Daele
[email protected]

Hi Paul,
Normally you should find it on the following path:
(http://service.sap.com/swdc)
Download => Installations and Upgrades => Entry by Application Group => SAP NetWeaver => SAP NETWEAVER => SAP NETWEAVER 04 => Installation and Upgrade => Windows Server => <your DB>.....
Installation Master MS SQL (for example) for the Windows X64 is a CD named 51031282...
Hope you can find the one you are looking for....
Regards
Rolf
Ps.: If you can't see or find the right CD/DVD's it could also point to missing authorization on the Marketplace...

Cannot install jwsdp-1.2 on Windows 2003 Enterprise Server

Hello,
We are trying to install jwsdp-1_2-windows-i586.exe on a Windows 2003 Enterprise Server system, but unfortunately we are not able to do this.
Even worse the installation program simply stops without any message at all. So we have no clue how to proceed. Any help would be appreciated.
Greetings,
Erwin.

Yes,
I have attached the output, but the installation just stops..
Greetings,
Erwin.
D:\install>jwsdp-1_2-windows-i586.exe -console
Initializing InstallShield Wizard...
Searching for Java(tm) Virtual Machine...
Searching for Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Searching for Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Searching for Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Searching for Java 1.4X by Sun Microsystems
Verifying Java 1.4X by Sun Microsystems
D:\install>

Is is possible to add Windows 6 64-bit drivers to a Windows 2003 print server?

We are having some trouble figuring a way in which to support network printing for Windows 7 64-bit machines that we are starting to intermittently put out in what, as of this moment, is still primarily a native XP 32-bit environment. Our concern has been that, if we replace the drivers on the print server to the Windows 7 64-bit drivers, then the XP machines will then pull down those drivers and then not be able to print any longer. According to Microsoft, the way around this is to utilize the "Additional Drivers" area within the properites of the printer. From there, in theory, you can add a new driver that uses "x64" as the print processor. However, when we attempted to do this on our legacy Windows 2003 print server (which I believe to be 32-bit) we noticed that, in the "version area" of the selection for the x64 print processor, Windows 7 is not listed. We then receive the following error message after we attempt to go forward and add the driver. . .
-Selected printer driver not found
The specified location does not contain the driver HP LaserJet 4050 Series PCL6 for the requested processor architecture
It looks to me that the problem is in that the server is Windows 2003 and we are attempting to make Windows 7 drivers work within that framework. Can someone please confirm this suspician or instruct us further?
Thanks,
-Brian McKnight

Gotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey

Satellite A100-906 PSAA9E: I cannot find drivers for Windows 2003 R2 Server

I found and installed some drivers from http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU
Look at the screenshots of my computer please.
"Device Manager" window:
http://www.disa.ho.com.ua/toshiba/1.GIF
http://www.disa.ho.com.ua/toshiba/2.GIF
http://www.disa.ho.com.ua/toshiba/3-1.GIF
http://www.disa.ho.com.ua/toshiba/3-2.GIF
http://www.disa.ho.com.ua/toshiba/4-1.GIF
http://www.disa.ho.com.ua/toshiba/4-2.GIF
http://www.disa.ho.com.ua/toshiba/5-1.GIF
http://www.disa.ho.com.ua/toshiba/5-2.GIF
How can I solve this problem?
ps: sound not working

Hi
As mentioned above you will not find Toshiba drivers designed especially for the Windows 2003 R2 Server.
But dont worry and dont give up.
The simply Windows XP drivers should be compatible and you should be able to install the Xp drivers on the Win2003 Server OS.
good luck

How to configure Https in Project server 2010.

HI,
Can i any one help me,
How to configure Https in Project server 2010.
My server farm is 1.Test1(App & Wfe) 2. Test2(App & Wfe)
Both are load balanced wit NLB as abc.hyd.in
DO i need to Install certificate in two servers Test1 & Test2 or one server is enough ?
Can any one please provide me a link to configure Https for project server 2010 for Two Farms Servers.
Thank You, Kumar KSV

There is no special configuration for Project Server to have the IIS enabled, it follows the typical sharepoint SSL enablement, we might need some mor edetails on how your NLB is done is it hardware based, software based ? it all depends how you want
to architecht the system, you can enable the Https either on NLB or WFE, again depending upon how you want to enable it, you will need to install the certificates on both WFE or on NLB
Follow the blog below to configure the SSL:
http://epmxperts.wordpress.com/2011/03/05/extend-same-project-web-app-instance-for-different-protocol-authentication-mechanism/
http://blogs.msdn.com/b/sowmyancs/archive/2010/02/12/how-to-enable-ssl-on-a-sharepoint-web-application.aspx
http://www.sharepointconfig.com/2010/03/configuring-a-sharepoint-website-to-allow-ssl-connections/
Thanks | epmXperts | http://epmxperts.wordpress.com

How to configure windows 2003 x64 server to run CFUSION MX7

Similar Messages

Maybe you are looking for