How to configure Windows server 2003 with WebDav

Can anyone advise on the best way to configure Windows server 2003 with WebDav so I can get the likes of some of those Apps such as PDF Expert and GoodReader to see the folders.
I have installed the necessary services and on a Windows PC and can browse to the URL OK which lists the files (setup using a Virtual Directory).
When I tried using this with GoodReader/PDF Expert, it could not find the server in question.
Can anyone help me?

Hello，
Please make sure you have checked "anonymous users" on receive connector.
Do you mean you can't send an email to external email address? If so, please post the detailed NDR information.
Please use get-receiveconnector | fl cmdlet to check your receive conenctor configuration.
Cara Chen
TechNet Community Support

Similar Messages

Connect SQL Server 2012 from Windows Server 2003 with native client 9.0

Hi,
I currently have a setup where ETL tool Ab Intio, running on a Linux server, connects to the SQL Server 2005 through a passthrough Wintel server with Windows Server 2003 OS using SQL server native client 9.0
Now I have the requirement to upgrade the SQL server from 2005 to 2012.
My question is, will it be possible to connect to SQL server 2012 through Windows Server 2003 with native client 9.0?
As per the specs, I need native client 11.0+ to fully support SQL Server 2012, but then, as per specs, native client 11.0 doesnot run on Windows server 2003. OS upgradation is currently not on the cards.
So will it be possible to the run the basic queries we use currently, if we can connect SQL server 2012 through Windows Server 2003 with native client 9.0/10.0, without updgrading the OS of the Wintel server?
Thanking you in advance!

Hi Soumya,
Yes, you can use the SQL Server Native Client shipped with SQL Server 2005 to connect to a SQL Server 2012 instance, and there is no need to upgrade the operating system.
Regards,
Mike Yin
TechNet Community Support

How to migrate windows server 2003 to 2008 live server

How to migrate windows server 2003 to 2008 live server without shutdown could anyone explain me ?
Thanks & Regards, Amol . Amol Dhaygude

I don't think you can do it without a shutdown. This also depends on the types of services, roles etc hosted on the server.
Refer this : http://technet.microsoft.com/en-us/library/cc755199(v=ws.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How to install windows server 2003 on Sunfire x4150?

hi, i'm very new to Sun server.Sorry if i dont know anything about it. But now i have to install Windows Server 2003 on this Sunfire x4150 server. How can i do that? I've try to install but it give me error about the driver.
Some question:
1. Can i install both Sun Os (Solaris?) and Windows Server together? If cant, can i format the Solaris OS and install a fresh Windows?
2. OR actually i should install inside a Virtual Machine?
Here are some links that i found. Am i following the right direction? The article suggest me to download FloppyPack from Sun's website. So, should i just downlaod the FloppyPack (360+KB) ? I dont need to download other driver package?
http://www.seedsofgenius.com/pdf/wp1.pdf
http://dlc.sun.com/pdf/820-5837-10/820-5837-10.pdf
Sorry, i have totally no idea at all.
Thank you very much if you can help me . OTL

Might be a bit late for you, but if this helps anyone else, good.
I had the same issue with an X4600 lately. You need to download the Sun Installation Assistant cd and boot from it to install anything other than Solaris. This cd is similar to the ones that Compaq andDell sendout with their servers. It will do a semi automatic install after you give it the information about the os, set up disks, etc.
Easy to do, search the sun support site for the SIA image particular to your hardware.

How to configure the server 2012 with NAT settings & 3 public IP addresses

Hi everybody,
I received this from my ISP:
Here's your IP informationMain IP: 70.164.1.165Subnet
Mask: 255.255.255.0
Gateway: 70.164.1.1
DNS1: 68.4.16.30
DNS2: 68.6.16.30
2 additional usable IP's Natted to 70.164.1.165
Usable IP's 70.182.178.97 & 98
Subnet Mask if needed: 255.255.255.252
If you are using one server use 70.164.1.165 as the main IP then add/bind 70.182.178.97 & 98 to the NIC.
For Linux Servers
Network 70.182.178.96
Broadcast 70.182.178.99
If you are using a firewall or router, please make sure you are using 70.164.1.165 on the WAN interface, you can use / NAT 70.182.178.97 & 98 to your server(s).
Main IP can also be natted to your server.
Please make sure shared IP hosting is utilized to conserve IP addresses per ARIN requirements.
I have a Dell server, setup with Server 2012 DataCenter.
I plan to run two VM's running ASP.NET web applications connected using the two additional IP addresses.
I assume I should setup the VM Host to the base address .165 - simple enough no problem and I know how to setup the VM's on their own separate network and I can access the internet - no issues with that.
How do I setup the additional public addresses since they have to pass through the Main address to the correct VM?
I have googled for a few days and my ISP tech people look at me like I want to extract their teeth. Their answer is to sell me a router and set it up. This really does not seem that hard a task.

Try maybe below configuration.
VMHOST
NIC1 - 70.164.1.165
NIC2 - 192.168.0.1
255.255.255.0
NIC3 - 192.168.1.1
255.255.255.0
VM1:
Bind VM NIC1 to VMHOST NIC2
NIC1 - IP1:192.168.0.2 255.255.255.0
IP2:70.182.178.97
VM2:
Bind VM NIC1 to VMHOST NIC3
NIC1 - IP1:192.168.1.2 255.255.255.0
IP2:70.182.178.98
On VMHOST set static traces (use Command Line):
ROUTE ADD 70.182.178.97 MASK 255.255.255.255 192.168.0.2
ROUTE ADD 70.182.178.98 MASK 255.255.255.255 192.168.1.2

Can't connect windows server 2003 with domain account

I have installed an agent on windows 2003 server successfully but I cannot add domain account as a preferred credential to connect to windows. My OMS is 11g running on RHEL 5 and I am trying to deploy sql server plugin to windows 2003 server. I could deploy the plugin with the same domain account to windows 2008 without any error but for some reason, but I cannot use the same domain account on windows 2003. This domain account is part of administrator group on both 2003 & 2008 servers so I don't know what I need to do different for 2003. Please help me. Thank you.

Can you provide some more details and/or screenshots?
I'm not sure exactly what you mean here: "I cannot add domain account as a preferred credential to connect to windows"
Are you in the Agent preferred credentials page? What is the error?

R12 on Window Server 2003 with Cygwin and Visual Studio

Hi,
We have passed the pre-install checks but RapidWiz fails at 13% completion.
We checked back on the pre-requisites and found that make and bash files we downloaded from site are of higher version than stated in metalink Note 414992.
We are unable to get the supported lower version. Can anybody help?
The files we are looking are make and bash from bin directory of cygwin. The versons supported are :
Make : versions 3.79.1-7 and 3.80-1
Bash : versions 3.0-11, 3.1-9, 3.2.9-11, and 3.2.25-16
Amrish Gaur
[email protected]

Hi Amrish ,
See also: Note 395361.1 - Could not relink at windows using Cygwin ERROR: *** target pattern contains no `%'
The note is for 11.5.10.2 but can also be used to replace the make version at R12.
But I don't think your issue has something to do with the make version as wrong version of make will only give issues during the relink.
KAR

Quicktime 7.1 won't install with MS06-015 on Windows Server 2003

Quicktime 7.1 will not install correctly on Windows Server 2003 with MS06-015 - Vulnerability in Windows Explorer Could Allow Remote Code Execution installed.
We have tried this on at least 6 machines. All fail at the last step in the install process with the following error:
"Unhandled Exception:
Error Number: 0x80040707
Description: DLL function call crashed: QTInstallCode.QuickTimePostInstallProc
Setup will now terminate"
This leaves Quicktime (and iTunes if installed) broken.
Removing MS06-015 allows Quicktime 7.1 to be installed but leaves the gaping holes fixed by MS06-015 wide open - not a good place to be.
It's more than likely that this is caused by Quicktime 7.1 being blocked by Verclsid.exe which is installed by MS06-015. See this Knowledge base article - You may experience problems in Windows Explorer or in the Windows shell after you install security update MS06-015 for more information.
Can anyone else please confirm this or better still can this please be fixed?
Cheers,
Sim

G'day Sam
First I gonna tell you don't try this at work Server...
I had try this on Windows Server 2003 Standard Edition and it work fine/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic_ __/migration-images/migration-img-not-avail.png
After I had been test and test..... Look like QT-7.1 doesn't like(Shell32.dll Ver. 6.00.3790.2662).
There is way to fix this problem.
1. Send me an email, I will send you back (Shell32.dll Ver.6.0.3790.2534)<< This version working with QT-7.1 after I uninstall all the HotFix Update that relate to Shell32.dll.
How to replace this dll file
Don't use Search to find this file.
Click into C:\ and type in the Address bar C:\windows\system32\ then find the current Shell32.dll > Rename it to some thing else, just incase if it not working for you, so you still have the orignal file.
Then copy the file I send you to the System32 folder.
Restart you PC and try to install again....
Good Luck
Let me know if it not working...
Cheer...

SAPSPRINT with window server 2003 SP1

Dear all,
Currently we are using Window server 2003 with no SP(service pack) installed. But to install barcode.dll, we need the SP1 to be installed before we can proceed to install.
I would like to know what is the impact to the sapsprint if we install the window server 2003 SP1?
Regards,
Jerry Chiang

I had confirmed with the SAP consultant and the result show is working fine so far

Windows 8 and IE10 and 11 not accepting Proxy Settings via Group Policy from windows server 2003

Hi
We are still running Windows Server 2003 with a Win7 and Win8 desktop environment. I can control Win7 IE9 settings,
But Win8 systems are running IE10. We have an internal proxy server.
Is there any way to force the proxy settings to the Win8/IE10 or 11 systems .
i have tried with The IE 10 .adm template and applied gpo,but does not have any proxy settings for ie10 and no changes were applies
please can anyone help me regarding this
i want to apply GPO from windows server 2003 to windows 8 ie10/11
Thanks
KNC

Hi,
I agree with Zanderol24, we can install RSAT on a windows8 client, and then we can use Group Policy Management to manage group policy from the client.
For more information about RSAT, we can refer to the following link:
Remote Server Administration Tools (RSAT) for Windows Client and Windows Server (dsforum2wiki)
http://social.technet.microsoft.com/wiki/contents/articles/2202.remote-server-administration-tools-rsat-for-windows-client-and-windows-server-dsforum2wiki.aspx
For more detailed information about how to use GPP to configure the proxy setting for ie10 and ie11, we can refer to the following link:
How to configure Group Policy Preference settings for Internet Explorer 11 in Windows 8.1 or Windows Server 2012 R2
http://support.microsoft.com/kb/2898604
When we use GPPs you need to be aware of the F5-F8 keys:
Red / Green: GP Preferences doesn’t work even though the policy applied and after gpupdate \force
http://blogs.technet.com/b/grouppolicy/archive/2008/10/13/red-green-gp-preferences-doesn-t-work-even-though-the-policy-applied-and-after-gpupdate-force.aspx
Besides, aside from using group policy to manage IE, IEAK can also be used to do this.
For IEAK, the following article can be referred to for more information.
Internet Explorer Administration Kit (IEAK) Information and Downloads
http://technet.microsoft.com/en-in/ie/bb219517.aspx
Best Regards,
Erin

Windows Server 2003 No Mouse or Keyboard

Hi,
After a hard reboot (accidentally being unplugged) I have no mouse and keyboard input. I am stuck on the Login Screen. I am using a hard wired USB keyboard and mouse and I don't have a PS/2 on the computer. Accessing the computer remotely is not an option
because I can't login to start any programs.
Thanks

You might try a repair install.
How to Perform an In-Place Upgrade of Windows Server 2003
How to integrate Windows Server 2003 Service Pack 2 files into the Windows Server 2003 installation folder
If the media is lost.
How to replace Microsoft software or hardware, order service packs, and replace product manuals
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Printing problems on Windows server 2003

Hi All,
I was printing perfectly on my shared printer (HP Laserjet 1000) on my Windows server 2003 with a domain.
Since this week I can't print anymore. I keeps failing with failed authentification. Nothing changed on my server or iMac except the latest security patches on the iMac.
The event log shows up user _lp that is trying to access the printer... not the user that I'm using...
I tried to uninstall and reinstall the printer on the iMac without success.
Anyone has an idea how to fix this ?
Thanks,
Pascal

I'm having the same problem now with printers on Windows 2000 systems. The print queue (which worked forever on 10.4 and initially on 10.5) now gets access denied from the SMB server. The "add authentication" thread doesn't fix it as the latest update seems to send user ID "_lp" to the SMB server rather than the user credentials set up in CUPS.
I tried "smb://user:password@server/printer" and it still doesn't work.
Again, it's worked for a long while and just recently broke due to Leopard or an update.
-Rick

Cold fusion 8 and Windows Server 2003 Administrator Login

I cannot seem to login to my coldfusion (trial version)
administrator login after installed successfully on my Windows
Server 2003 with Web Edition Service Pack 2.
It tries to go here which is correct
http://127.0.0.1/CFIDE/administrator/index.cfm
But I get
Bad Request (Invalid Hostname)
I attempted to go through IIS through default Web Sites and
browsed over to
http://192.168.10.19/CFIDE/administrator/index.cfm
and I now get a "The page cannot be found" display message.
Is there anything special I need to do, perhaps in Web
Service Extentions in IIS or something since I don't see
"Coldfusion" mentioned anywhere, and I can't seem to find any clear
instructions on the Adobe site.
Please help, thanks.

You should
configure
IIS for Coldfusion. Pay particular attention to the section "To
verify your IIS configuration".

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Acrobat 9 pro support windows server 2003 32bit?

in the acrobat 9 pro readme file,I see the system requiement:
Windows Server® 2003 (with Service Pack 2 for 64-bit);
my question is that does acrobat 9 pro support windows server 2003 32 bit?
I have install it at windows server 2003 32bit,
but when i open it, a message box
"Licensing for this product has stopped working"
i have try the solution in kb405970, and can not resolve it.
so manybe really it doesn't support windows server 2003 32 bit?

John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
1. From 32bit -> 64bit
2. From Windows to Linux
3. From Oracle 10gR2 to 11gR2
The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
Cheers, APC

How to configure Windows server 2003 with WebDav

Similar Messages

Maybe you are looking for