How To Configure XI Receiver Communication Channel ?
Hi Expert,
I have a Scenario wherein i have 2 XI systems & i need to pass the messages between these 2 XI / PI system using XI Adapter. Can any body tell me how to configure the XI Adapter Step by Step. Is it required to Create the SM59 RFC destination with type H. Pl. Explain me in detailed.
Regards
Umesh
Hi Umesh,
In creating XI receover communication channel, you have 2 options for Addressing Type:
1. URL Address - no need to create RFC destination. You just have to specify the XI receiver host name, HTTP port, path (/sap/xi/engine?type=receiver), Authentication data (logon details for SAP Client number of the PI system).
2. HTTP Destination - create RFC destination in SXMB_ADM and specify the RFC destination name in your receiver communication channel.
For SAP documentation, see this link: http://help.sap.com/saphelp_nwpi711/helpdata/en/e1/091640a991c742e10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Jenny
Similar Messages
-
How to configure HTTP receiver comm channel with dynamic URL parameters?
I need to perform HTTP Post using PI. URL contains some parameters. I need to set these parameters with different values in run time.
Please help to do this.
Thanks
RanjiCheck the section Adapter Specific Message Attributes from this help section:
http://help.sap.com/saphelp_nw70/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
The parameters can be set in the Message Mappinga nd then using the appropriate options in communication they can be included in the message header....for more info search with keywords "Dynamic Configuration" and you will get to know how the procedure works.
Regards,
Abhishek. -
Dynamic configuration of receiver communicaton channel?
I have files, Header line tells which server it should go.(Like ip address and port). How can dinamically configure the receiver communication channel.
Thank You
Ganges LeavesHi,
I have very similar requirement, In my scenario I need to pick up files from 4 static locations and based on the file name and pick up type(file/ftp) I can find out the destination's connectivity information from a Cross-Referencing table(Based on MS-SQL Database table- I can get this using look API) in this table we maintaining more than 100 destinations(host/user_name/password etc).
Now I need to set the connectivity information dynamically at runtime. I know this is not possible with Standard XI but does anyone thinks this is possible by any technical way using with XI.. Adapter Modules or Java Proxies?
This is very Critical to win the war with other middleware tools. Please let me know your thoughts and comments...
thanks,
Laxman Molugu -
How to configure receiver communication channel in File to mail scenario?
Hi all,
I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is a mail server. should i create any third party business system for this one?
can anyone suggest me to define a receiver comm channel in a right manner?
helpful answers will be rewarded.Hi,
Check these
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards
Seshagiri -
Dynamic Configuration of Mail receiver Communication Channel
Hi,
like in /people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping for http receiver CC, i am trying to do header customisation, with XHeaderName1 for mail header fields like content-type, content-disposition, but it doesn't works ...
in my mapping i've added :
> (...)
> DynamicConfigurationKey cDisposition = DynamicConfigurationKey.create("http:/""/sap.com/xi/XI/System/Mail", "XHeaderName1");+
> dynaConf.put(cDisposition, "attachment;filename=myFile.txt");
in Communication Channel ASMA i've added variable header : XHeaderName1 --> Content-Disposition
in monitoring i see that XHeaderName1 is filled with attachment;filename=myFile.txt
but in the mail send like this, this configuration has no effect
Someone can help me ?
Edited by: MedAmine on Aug 19, 2009 3:20 PMOnly one standard mail header field can be influenced: this is indeed "Content-Disposition".
You have done halve way, the only thing you have missed is to set the additional parameter 'OMail.AddContentDisposition' to false within 'Advanced Mode'.
Have a look at this WiKi:
http://wiki.sdn.sap.com/wiki/display/ESOAInfrastructure/Dynamic+Email+Attachment+name+for+Received+Mails+with+ASMA+and+without+using+mail+package -
How Do We Monitor HTTP Receiver Communication Channel
Hi Exports,
How do we monitor the HTTP Receiver communication channel. Could you please share your ideas.
I am able to send the message to http to third party system. i want to monitor all messages which it's goes to third party system. Same like if you go to component monitoring we have communication channel monitoring over there we can do monitoring by adapter but when we choose http communication channel there is 0 messages.
Please provide monitoring thing those messages which is goes to third party system.
Advance thanks
Regards
Ramidi SThere isnt any transaction to directly monitor the HTTP adapter. However u may do the following:
1. To test the HTTP adapter you can just test the adapter_plain service in TCODE SICF.
2. TCODE : SMICM and then Shift + F1 and you can see the status of the HTTP server
3. You can go to SM59 to see whether the HTTP connections between XI and R/3 are up and running
Regards,
Prateek -
Dynamic user credentials for XI receiver communication channel
Hi Experts,
I am working on File(XML ) to ABAP proxy scenario. I want to know if I get the user-id and password information to login to R/3 system as part of the XML payload, can I use this information to connect to R/3 system in my XI Receiver communication channel?
Using a generic user credentials either in RFC destination or specifying it in communication channel configuration will not work. This is because the requirement is that the objects that will be created in inbound ABAP proxy (for ex Material Master) should be created with the user information that is coming from payload rather than a generic user.
Any pointers how to acheive this?
Thanks and regards,
Prasad
Edited by: Prasad MLN on Nov 16, 2009 4:00 PMHi,
You might want to learn more about Principal Propagation in sap XI:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID2039785750DB21057082877817322485End?blog=/pub/wlg/7068%3Fpage%3Dlast%26x-order%3Ddate
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/0f16bef65c7249e10000000a155369/content.htm
Regards,
Ravi Kanth Talagana -
RFC Look Up APIs for a IDOC Receiver Communication Channel
Hi,
Can we use RFC Look Up APIs in UDF for a IDOC Receiver Communication Channel. (File to IDOC Scenario). Requirement is to send a notificaiton when IDOC got posted with IDOC number.
Best Regards,
Madan AgrawalAs the name suggests, RFC lookup uses RFC receiver channel only. In mapping of your File to Idoc scenario, you may perform this lookup.
Requirement is to send a notificaiton when IDOC got posted with IDOC number.
Configure ALEAudit for this requirement. How were you planning to use RFC lookup for such a requirement?
Regards,
Prateek -
Error in Receiver Communication Channel in FCC
I have a simple scenario of Proxy to File. I have to just one field in complete row. So my structure is as below : MT_RecordIB -> Records. So my XSD looks like this :
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://XXXl.com/INF31018/SAPSerOrd_DaysIn" targetNamespace="http://hnwl.com/INF31018/SAPSerOrd_DaysIn">
<xsd:element name="MT_RecordIB" type="DT_RecordIB" />
<xsd:complexType name="DT_RecordIB">
<xsd:sequence>
<xsd:element name="Records" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
I have used FCC and the parameters are :
Recordset Structure Records
Records.fieldSeparator 'nl'
But I am getting following error in Receiver Communication Channel :
Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_RecordIB' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.21)
Thanks,
Pankaj SinghHey Pankaj,
Your content conversion parameter might be configured improperly.
Refer this blogs
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Refer the following threads for your problem
[ Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'|Unknown structure 'ns0:MT_dbglgtr_FileName' found in document']
Rgds
Ramesh -
Need to use only one sender and receiver communication channel.
Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 ---> E://dir1/File1
F://dir2/file2 ----> G://dir2/file2
H://dir3/file3-----> I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit RameshHi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki -
Recordset structure in receiver communication channel
Hi gurus!
I have a problem with my receiver communication channel it says "Unknown structure 'Headers' found in document', probably configuration error in file adapter (XML parser error)'"
It's for sure that the problem is in the configuration of the adapter.
My scenario is from iDoc to File and i need to write only one header and many Lines, i made the data type like:
Headers
---Header
Lines
---Line
And the problem is in the configurarion of the recordset structure and the lines below.
If you know another way better to make the data type to acommplish what i've to do, just tell me I just made it that way because i thought it could work.
If something is not clear just let me know, what i more need is the config. of the receiver adapter.
Thanx in advance.
JuanHi Juan
If i understand correctly .. you are doing FCC on your receiver communication channel...and the following is your Target Data type
Headers
---Header
Lines
---Line
and FCC parameters you created are as below
Recordset structure: Headers,Header,Lines,Line
Header.fieldSeparator \r\n
Header.endSeparator \r\n
Line.fieldSeparator \r\n
Line.endSeparator \r\n
If the above data is correct, then I would like you try out the FCC parameters in my previous post. Because in the FCC parameters, you used only substructures(Header and Line) and you did not mention the lists ( Headers and Lines). That's why i think it is errored out.
If my interpretation is wrong, please let me know where i went wrong, i will try to look at again. -
Error in JDBC receiver Communication Channel
Hi,
I am facing a problem at receiver communication channel of JDBC adapter. I am gettting the error as,
"com.sap.aii.af.ra.ms.api.RecoverableException: Channel has reached maximum concurrency(5,000 concurrent Messages) and no free resourse found within 5,000 milliseconds; Increase the maximum Concurrency Level."
I am having the configuration on 4 different nodes. but suddenly only 1 out of 4 is working fine but remaining 3 are throwing this exception. It says to increase Maximum Concurrency level but i want to send only one message through one channel.
Is there a way to rectify this error. I am in deep trouble.
can anyone help me out in solving this issue, Its very greatfull if you do the needy.
Thanks,
Soorya,Hello Aarthi,
I have gone through the link which you have provided for me in this regard. But i am not clear why those values,
AFW.Call.maxConsumers 10
AFW.Recv.maxConsumers 5
AFW.Rqst.maxConsumers 10
AFW.Send.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 10
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 10
These are concerned to MS only but not at JDBC adpater.
We have to look at JDBC prospective but not at the MS prospective.
So can you please look into the issue as JDBC adapter perspective.
Its like this that, there are 5000 messages are waiting for the free resource with in the next 5secs and as it is reached maximum concurrency of 1.
So my question here is,
Is there only one option to increase this value to 2 or more?
Or else do we have any other option to overcome this problem.
Please reply to this ASAP.
Thanks,
Soorya. -
Regarding the JDBC Receiver Communication Channel error
Hi All,
While executing Jdbc to Jdbc interface, i am getting error in jdbc receiver communication channel. please see below message for error description..
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel 'JDBC_AccntStatements_Receiver', Service 'BS_BusinessSystem', Party '': JDBC Adapter configuration not activated
Note: the channel status is active and activated(not in change mode).
Any idea on this error.
thanks,
Madhusudhan.Hi
According to your Error Message,
Saying that JDBC Configuration is not Active.
Once again cross check all the config is Activated & also Test your Config Using Config Test Tool in ID
And also check in RWB-Adapter Engine-Adapter monitoring ---select the option instaled & Started. whether the JDBC Adapter is working fine or not -
SSL in Soap receiver communication channel
Hi,
I have a webservices that works fine in Soap UI. The webservice provider uses the SSL, but works like a web browser, doesn´t need to install a certificate before access the webservice.
But when i try to use SAP PI using the soap receiver communication channel, the soap adater return the follow message:
"Peer certificate rejected by ChainVerifier"
I read some thing about using axis to solve this problem but I can´t find anything to configure this scenario.
If someone had this problem and solved it, i will apreciate the help.
Thanks
FabricioI Have 2 communication channel:
1) This works fine
Adapter Type: SOAP
Receiver
Transport Protocol: HTTP
Message Protocol: SOAP 1.1
Adapter Engine: Integration Server
Target URL: https://gw-homologa.serasa.com.br/wsacheixml/wsacheixml.asmx
SOAP Action: https://sitenet05.serasa.com.br/WSAcheiXML/WSAcheiXML/ConsultaAchei
2) This doesn´t work
Adapter Type: SOAP
Receiver
Transport Protocol: HTTP
Message Protocol: SOAP 1.1
Adapter Engine: Integration Server
Authentication: Basic
User/Password
Target URL: https://treina.spc.org.br/spc/remoting/ws/consulta/consultaWebService
SOAP Action: blank
Both are https and the certificate is sent at communication time (There isn´t a certificate to install in the Key Store in Visual Administrator)
I read that Axis manage this kind of integration with webservices, because the certificate must be installed at the moment of sending http request.
I don´t know why the first interface works fine an the another doesn´t work, then I´m trying with Axis.
In the SOAP UI both interfaces work fine.
Thanks -
Error in HTTP_AAE receiver communication channel, PI 7.4 dual stack
Dear Experts,
I am facing the below certificate error in HTTP_AAE receiver communication channel while using the third party (bank) private key. Third party bank server is HTTPS enabled, moreover they have generated the public and private keys on their server, and they shared the corresponding private keys in .p12 format to us. Our scenario in SAP PI is synchronous ABAP Proxy to HTTP_AAE, when I see the message in SXMB_MONI after testing, we get he below certificate error, though we have provided the correct path from keystorage view and keystorage entry in HTTP_AAE receiver communication channel
“com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SENDING_HTTP_REQUEST, sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target”
We have imported the private key provided by bank in Netweaver admin key storage, by following the below steps.
NWA -> Certificates -> Key Storage -> TrustedCA->Import Entry->Entry Type->PKCS#12 Key Pair->select the .p12 file->import.
Please see the attached doc for related screenshots.
Please experts help me experts as this is on high priority from client, also suggest me if I am doing anything wrong here.
Thanks,
FarhanHi Farhaan,
do you have only one certificate or multiple certificate? HTTPS can have 2 or 3 certificates (Root, Intermediate [optional, if any 3rd party person is there in the middle then we can get this certificate] and system certificates).
The issue is with the certificate and it can be because All the certificate is not present or path is not correct.
Please refer the below wiki in which solution is given for this peroblem.
Troubleshooting 7.1 - End-User Experience Monitoring - SCN Wiki
The similar issue is resolved by applying SP level patch, please refer the below discussion
SAP PI 7. 3 HTTP_AAE Receiver with SSL
Please check the below blog -
Configure the HTTP_AAE receiver communication channel with SSL
please also check the below discussion
Where to Import Clients SSL certificate for HTTP_AAE
regards,
Harish
Maybe you are looking for
-
The problem is with my iPhoto on my Macbook air. I am trying to move my library from my airbook onto my passport drive. I did it and deleted it from the airbook but it simply re appeared possibly from the cloud. Not sure what to do next. Sorry I am
-
How do I copy my old profile folder to a new computer with Firefox 4?
Hey, I saved my old profile folder from my previous Firefox 4 installation on my old computer. I installed FF4 on the new computer. I tried placing the old profile files on the new profile folder, but when I start Firefox, it doesn't show any of my p
-
i have just followed all the instructions in support to remove duplicates from my library but now most of my music is gone except for my recent purchases. How come and how do i fix it?
-
WhAT IS NEEDED TO PLAY M3U FILES?
What is needed to plAY M3U AUDIO FILES?
-
IMovie can't update from 10.0.3 to 10.0.6
Okay, so since updating my OS from Mavericks to Yosemite, my iMovie fails to open because i have an outdated version. Whenever I try to open it, it says that I'm using iMovie 10.0.3 which is incompatible with Yosemite, and that I need to update to 10