How to Configuring case sensitivity for NFS on Windows Server 2012

Configure Case Sensitivity for File and Folder Names
http://technet.microsoft.com/en-us/library/cc725747.aspx
To configure case sensitivity for file and folder names using the command prompt
Open a command prompt.
To enable case sensitivity, type:
nfsadmin server [ComputerName] config casesensitivelookups=yes
But, "casesensitivelookups" is removed in Windows 2012 version.
Help Me~

Hi,
Sorry for the delayed response.
According to the following article, we still can use
nfsadmin to configure case sensitivity for Server for NFS in Windows Server 2012.
Nfsadmin
http://technet.microsoft.com/en-us/library/cc771599.aspx
Note:We
need to disable Windows kernel case-insensitivity in order for Server for NFS to support case-sensitive file names. We can disable Windows kernel case-insensitivity by clearing the following registry key to 0:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel
DWORD “obcaseinsensitive”
Hope it helps.
Best regards,
Frank Shen

Similar Messages

Can't find the security tab for group in Windows server 2012

can't find the security tab for group in Windows server 2012
but I can find it in Windows 2008 R2
so how to display the security tab for group in 2012?
Please click the Mark as Answer button if a post solves your problem!

Click on the View menu and ensure that "Advanced Features" is enabled/selected.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

Configure Hyper V Failover Cluster on Window Server 2012 R2

I have 3 node cluster of hyper v and configured csv all machine working fine but after run backup machines get paused, so i have removed backup agent, during starting one virtual machine csv volume get un accessible and all machine pertain to that csv get
offline. subjected are the errors.
Cluster Shared Volume 'Volume2' ('Volume2') is no longer accessible from this cluster node because of error '(1460)'. Please troubleshoot this node's connectivity to the storage device and network connectivity.
Cluster Shared Volume 'Volume2' ('Volume2') has entered a paused state because of '(c0000015)'. All I/O will temporarily be queued until a path to the volume is reestablished.
after troubleshooting i found a patch for the related issue but its not working for window server 2012 R2,
Windows8-RT-KB2838669-x64: its not running so kindly assist how to get this fix.
Talha Faraz Malik

Hi TFMalik,
"To avoid CSV failovers, you may have to make additional changes to the computer after you install the hotfix. For example, you may be experiencing the issue described in the "Symptoms" section because of the lack of hardware support
for Offloaded Data Transfer (ODX). This causes delays when the operating system queries for hardware support during I/O requests.
In this situation, disable ODX by changing the FilterSupportedFeaturesMode value for the storage device that does not support ODX to
1 "
For details please refer to the link below :
https://support.microsoft.com/kb/2813630?wa=wsignin1.0
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do you remove virtual desktops from a Windows Server 2012 R2 Pooled VDI collection

All - I have created a Pool VDI Collection with 15 total virtual desktops in it. I need to reduce the number of virtual desktops in that collection to five. I have searched through the GUI, TechNet and done a number of Google searches but nothing helpful
comes back. Does anyone know how to do this?
I am guessing I cannot just delete them out of Hyper-V since the collection knows how many desktops it is supposed to have assigned to it.
Thanks in advance.
Will Smothers

Hi Will,
Thank you for posting in Windows Server Forum.
We can use PowerShell command “Remove-RDVirtualDesktopFromCollection“ to achieve your goal.
PS C:\> Remove-RDVirtualDesktopFromCollection -CollectionName "Virtual Desktop Pool" -VirtualDesktopName @("RDS-WKS-A27") -ConnectionBroker "rdcb.contoso.com"
More information.
Remove-RDVirtualDesktopFromCollection
http://technet.microsoft.com/en-us/library/jj215515.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

LAN side firewall settings for Direct Access (Windows Server 2012 R2) in DMZ?

I am currently planning to set up our first Direct Access server (Windows Server 2012 R2). I will be in our firewall DMZ and we will be using the IP-HTTPS listener.
For the Internet facing rule only TCP 443 inbound/outbound is sufficient but for the LAN facing rules (not talking about the Windows server firewall) what would be the recommended firewall rules for a Direct Access server? Is there a best practice guideline
to follow for this? Appreciate any advice or comments. Thank you.

Hi Barkley
Please see this Technet Link which will backup your requirements - https://technet.microsoft.com/en-gb/library/jj574101.aspx
Section Reads -
When using additional firewalls, apply the following internal network firewall exceptions for Remote Access traffic:
ISATAP—Protocol 41 inbound and outbound
TCP/UDP for all IPv4/IPv6 traffic
Also another link from http://www.ironnetworks.com/blog/directaccess-network-deployment-scenarios#.VO3tfvmsVrU
"I have had a number of conversations with security administrators and network architects who have expressed a desire to place the DirectAccess server between two firewalls (firewall sandwich) in order to explicitly control access from the DirectAccess
server to the internal corporate network. While at first this may sound like a sensible solution, it is often quite problematic and, in my opinion, does little to improve the overall security of the solution. Restricting network access from the DirectAccess
server to the internal LAN requires so many ports to be opened on the inside firewall that the benefit of having the firewall is greatly diminished. Placing the DirectAccess server’s internal network interface on the LAN unrestricted is the best configuration
in terms of supportability and provides the best user experience."
Kindest Regards
John Davies
Thank for your reply and information John. I find it somewhat disappointing that Microsoft does not provide much more in the way of documentation and information regarding this topic. I required more information to show to our security team so they will allow
us to have the internal facing NIC not have more restrictive rules in place as it is a security concern.

Exam simulator for 70-410 Windows Server 2012 R2

Hello everybody,
I'm studying 70-410 (Installing and configuring Windows Server 2012 R2) from Exam Ref book, Microsoft Press.
When I studied 70-640 I used an exam simulator that I found on the CD attached to the book. For 70-410, what can I use for exam training?
Many thanks
Piero
Piero Bacarella - IT Professional - Rome(Italy) http://www.bacarella.info

Computer24HR,
Dumps are illegal and may result in the OP being banned from sitting certifications if they are caught using them so please don't advise people to do so. Given this, I will remove your previous replies from this thread.
The official sources of practice tests are available from:
Kaplan/SelfTest -
https://www.selftestsoftware.com/certtestprep/practice-test/microsoft/70-410.kap
MeasureUp -
http://www.measureup.com/70-410-Installing-and-Configuring-Windows-Server-2012-P3962.aspx
Transcender -
https://www.transcender.com/practice-exam/microsoft/70-410.kap
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

WinX missing for domain users (Windows Server 2012/R2, Windows 8/8.1)

Hi,
I recently created a discussion about a Winx (Right Click) issue that I have in my environment. For windows servers 2012/2012 R2 and windows 8/8.1, I don't have the right click menu.
I don't use roaming profiles. The workaround is to manually copy the Winx folder for each user who log on but I would like to understand why it doesn't work.
Here is the previous discussion I created.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e80c369-242f-47ba-bd22-aafb9b0a6072/winx-missing-for-domain-users?forum=winserverManagement#ab6deeb2-cbcd-4147-a871-4c76d4cb37af
I really appreciate your help.
Thanks

Hi,
I could not reproduce the issue.
When i log in the Windows Server 2012 with domain user, the WinX folder already exists ans the Right Click is ok.
So you could create a new domain user to check the result.
Regards.
Vivian Wang

How to configure data source for MS SQL 2005 Server.

Good morning,
While creating a data source for MS SQL 2005 Server, what are the values I should use for:
Object Factory, DataSource Type, and CPDS Class Name values ?
Thanks
Seenu

seenuFour wrote:
Hi,
I am working on a web application, the backend of which is a MS SQL 2005 server. I am creating a data source on the application server to manage the connection pool.
Hence I need to give the following values while creating the data source:...
Hence you need to provide some actual detail about what the context is.
IIS runs "web applications" but your question would have no meaning in that context. On the other hand it might have some meaning if you were running Tomcat.

Is a Full Text Index search case sensitive or not in SQL Server 2012?

I setup full text index on my contact table and am attempting to run a search on it using the following query:
SELECT *
FROM sysdba.Contact C
WHERE CONTAINS(C.FirstName, 'Test')
OR CONTAINS(C.LastName, 'Test')
The problem is it's clearly running a case sensitive search. I did a quick search to find out how to change it to be case in-sensitive and found two pages (both for SQL Server 2012) with conflicting answers:
1 - MSDN - "Query with Full-Text Search" - http://msdn.microsoft.com/en-us/library/ms142583(v=sql.110).aspx
Case sensitivity
Full-text search queries are case-insensitive. However, in Japanese, there are multiple phonetic orthographies in which the concept of orthographic normalization is akin to case insensitivity (for example, kana = insensitivity). This type of orthographic normalization
is not supported.
1 - TechNet - "Full-Text Search (SQL Server)" - http://technet.microsoft.com/en-us/library/ms142571(v=sql.110).aspx
Full-text queries are
not case-sensitive. For example, searching for "Aluminum" or "aluminum" returns the same results.
Can someone please explain this? Is it possible to do it without it being case sensitive? If yes, how?
(Sorry, I couldn't make those links b/c TechNet hasn't verified my account)
Thank you for your time and help,
Hanan

Whats the collation setting for the columns? try using a case insensitive collation as below
SELECT *
FROM sysdba.Contact C
WHERE CONTAINS(C.FirstName COLLATE SQL_Latin1_General_CP1_CI_AS, 'Test')
OR CONTAINS(C.LastName COLLATE SQL_Latin1_General_CP1_CI_AS, 'Test')
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to enable traffic between VPN clients in Windows Server 2012 R2?

Hello,
I installed Remote Access role with VPN.
IPv4 Router is enabled: http://snag.gy/UAMY2.jpg
VPN clients should use static ip pool: http://snag.gy/REjkB.jpg
One VPN user is configured to have static ip: http://snag.gy/TWwq0.jpg
VPN server uses Windows Authentication and Windows Accounting.
With this setup, VPN clients can connect to server, get ip addresses and can see server via server's vpn ip. Server can connect to VPN clients too (Using client's vpn ips). But VPN clients can't communicate with each other.
For example, VPN server has ip 192.168.99.5
VPN Client 1 - 192.168.99.6
VPN Client 2 - 192.168.99.7
I am able to ping 192.168.99.5 from both clients, and able to ping 192.168.99.6 and 192.168.99.7 from server via remote desktop. But I am not able to ping 192.168.99.7 from client 1 and 192.168.99.6 from client 2.
If I trace route from 192.168.99.6 to 192.168.99.7 - I can see that packets goes to server (192.168.99.5) and next hop - request timeout.
What else should I configure to allow network traffic between VPN clients?

Hi,
To better analyze this issue, would you please post the routing tables on the two VPN clients? You can run "route print" at the command prompt to get the routing table.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Setting case sensitivity for text searches

I am trying to figure out how to set case sensitivity for text searches for Oracle. I am using 8.1.7 and the documentation keeps referring me to the Basic_Lexer object. Does setting the mixed_case parameter to 'No' remove case sensitivity for the index or is there something else I need to do?

Do you recommend another field type that can be used that does not use case sensitivity?
Thank you

WSUS server role on Windows Server 2012 R2 - Supported SQL Configurations

According to
this page the supported SQL configurations for WSUS on Windows Server 2012/2012 R2 stop at SQL Server 2012 SP1, but there is no mention of SQL Server 2012 SP2 being supported.
However, both the SCCM 2012 R2
supported configuration page and this announcement state that SQL Server 2012 SP2 is fully supported on SCCM 2012 R2 with no
known limitations. Bearing in mind a big part of SCCM is to perform software updates which in turn requires WSUS to be installed...
... Is SQL Server 2012 SP2 supported on WSUS 4.0 (aka WSUS server role on Windows Server 2012 R2)?

The only thing that mattered for the versions mentioned on TechNet probably is the date the articles are published. I'm no Microsoft employee so I cannot guarantee you support even if I trace back some Microsoft article that explains the lifecycle of MS
products and support.
Fact is that MDT uses a database, SQL is a database server. SQL server has all kinds of compatibility modes to support databases dating multiple versions back.
Another fact is that a Service pack is an
update to the software (be it a large one) Microsoft will not break compatibility with their own products (and may others that relay on SQL server) by an update.
And a last fact is that in general, updates are required when you need support. After all, updates fix issues, and engineers generally don't like ghosthunting a bug that has already been patched.
MCP/MCSA/MCTS/MCITP

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
     username = apps
     document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
     username = merge
     document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
     Application Framework Agent
     Applications JSP Agent
     Applications Web Agent
     Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
*     <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
*          <jta-data-source>myJtaDataSource</jta-data-source>*
*     </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below :     <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
     <provider>org.hibernate.ejb.HibernatePersistence</provider>
                  <properties>
               <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
               <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
               <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
               <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
            </properties>
     </persistence-unit>
</persistence>Can you please tell me why is it so ??

How to Configuring case sensitivity for NFS on Windows Server 2012

Similar Messages

Maybe you are looking for