How to Configuring external certificate for MEP

Hi,
I want to configuring external certificate to my mep gateway tier , can any one tell me procedure how to configure the certificate.
I am configuring behind the firewall I cannot run default port no 8181 for https , so where can I change https port no for MEP after installation and I need to import external certificates in to keystore.

Hi Jayanth,
Both issues you raise are GlassFish issues rather than MEP issues per se.
To change the port, after doing 'asadmin stop-domain mep' you just edit the
domain.xml file in the .../domains/mep/config directory manually. Search for
8181 and change it to whatever you want, then restart GlassFish (asadmin start-domain mep).
In the MEP Installation Guide, there is a section on establishing trust between
tier1 and tier2 in a two-tier configuration. See http://docs.sun.com/app/docs/doc/820-7203/ggxmb?a=view
Hopefully, you can generalize that procedure to your situation.

Similar Messages

How To Install and Configure External Drivers for the JDBC & JMS Adapters

Hello colleagues,
Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
VERSION 7.10.
BBDD ORACLE - ojdbc14.jar
Regards.

Hi ,
Uisng Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
refer this two links,the procedure available how to deploy using JSPM.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
Regards,
Raj

How To Install and Configure External Drivers for JDBC & JMS Adapters"

hello ,
where can i download this Guide "How To Install and Configure External Drivers for JDBC & JMS Adapters"?
thanks
best regards
pietro greco

Hi Eleonore Rosenthal,
Could you please check the below links:
http://help.sap.com/saphelp_nwpi71/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/frameset.htm
Regards,
S.Manu.

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT
Regards,
Kumar

HAI..
External number assignment
If you want the user to assign the numbers, enter "EX" in the 'NR' field. The number ranges are then indicated by the letters "EX".
Number assignment for plan version 10 / object type S: Subgroup 10S

How to configure Email notification for User login's in Exchange Infrastructure?

How to configure Email notification for User login's in Client Machines?

Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

How to configure login modules for certificate logon

Hello,
perhaps someone of you has also tried to implement SSO via Client Certificates and is able to help me...
I have configured the login modules for rule based authentication with the option Rule1.getUserFrom = wholeCert and I have attached my certificate to my user in useradmin.
And also added the login module to the template ticket, as suggested by the documentation at help.sap.com
But when I logon to the portal or other application (for example useradmin) via https the authentication doesn't work (but I'm still able to logon via password).
I also tried auto. certifcate mapping and mapping by subject name but in every case the system ignores the configured login module. There are no errors in the log files.
Thank You,
Frank

Hi Frank,
did you configure the SSO for an individual policy configuration or did you edit and save the changes the ticket policy config? I ask, b/c if you applied the changes to the individual policy config then the SSO with certificates will be used <b>only</b> when you access the applications for that policy config.
You can also double check the login module flags - perhaps the authentication check doesn't reach the ClientCertLM at all.
Since you followed the help portal instruction I assume you've enabled strong crypto - it is required for client cert SSO. Ano easily committed mistake is to also not use the HTTPS port in the access URL.
Let me know if this helps...
Yonko

How to configure Oracle SSO for forms and apex

Hi All,
I am trying to configure oracle SSO for forms and apex using third party external authentication. Please help me how to configure. I a have tried all possible things
from web but I am not able to do it. Is there any doc or links are much appreciated.
Info: Some reason my oiddas web link is not working it used to work fine before and also the from /pls/orasso/ link I am not able to login may be because of my oiddas issue
Thanks

Hi Andreas,
Thanks you for your help. I am trying to implement third party external LDAP authentication for APEX and Forms.
So I started with OID and SSO setup to create external Partner Applications. Some reason my oid and sso web login links are not working. I didn't find any errors. I need some help in finding the problem and direction, I already read docs on web but no proper direction. I appreciate your help.
Thanks

How to compile external procedure for Linxu

Hello to all.
I'm not able to find how to compile external procedure on Linux.
I have 64bit release Linux (I don't know if I need special 64bit library or not).
I found only something like that:
gcc -fPIC -shared -o comsh64.so comsh64.c
Listener are correctly configured.
Library is in Oracle bin directory.
If I run select externproc from dual ... I don't receive any error message but program don't work.
I think that there is some missing parameter in gcc or some small thing ?
Thank you for possible answeer
Filip

Do you have someone any idea?
Now I have 1 library, 2 functions and 1 package with 2 functions:
int renamefile(char source, char destination)
{ int result;
result=rename(source,destination);
return result;
int comexi (char *c)
{ int ret;
ret = system(c);
return ret;
FUNCTION callSystemI(c in varchar2) RETURN binary_integer is
EXTERNAL LIBRARY extern_utils
NAME "comexi"
LANGUAGE C
PARAMETERS (c string);
function renamefile (src IN varchar2, dst IN varchar2) return binary_integer
AS EXTERNAL
NAME "renamefile"
LIBRARY extern_utils
LANGUAGE C
PARAMETERS (src string, dst string);
The first function still don't works, second function works.
Why?

HT4623 how to get ios5 certificate for openvpn

I need to use openvpn connect and I have had my own certificate. But Iphone still needs additional certificate. How do I get the additional certificate?
Thanks & Regards

Hi,
Here are some related links below for you:
a real certificate for a virtual machine
https://social.msdn.microsoft.com/Forums/azure/en-US/7c48763f-fb04-46c6-a6e6-c21740d007cf/a-real-certificate-for-a-virtual-machine?forum=WAVirtualMachinesforWindows
Configuring a custom domain name for an Azure cloud service
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-custom-domain-name/
Create a Service Certificate for Azure
https://msdn.microsoft.com/library/azure/gg432987.aspx?f=255&MSPPError=-2147217396
Since we are not familiar with Azure, if the information above is not helpful, please post another thread in Azure forums and post a feedback regarding your requirement:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

OBIEE 11g - How to configure Virtual IP for servers hosting OBIEE 11g

Hi,
I have 2 Linux servers.
I have installed OBIEE 11.1.1.6 on first server and did a scale out on second server.
I don't have a Load Balancer.
I want to configure Virtual IP for these hosts.
Please advise how to do it.
Thanks
Nitin Aggarwal

Refer to below lhks.
http://www.rittmanmead.com/2008/12/obiee-high-availability-the-bi-server/
http://www.rittmanmead.com/2009/02/obiee-high-availability-presentation-services-and-scheduler/
Thanks
Jay.

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
     username = apps
     document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
     username = merge
     document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
     Application Framework Agent
     Applications JSP Agent
     Applications Web Agent
     Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
*     <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
*          <jta-data-source>myJtaDataSource</jta-data-source>*
*     </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below :     <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
     <provider>org.hibernate.ejb.HibernatePersistence</provider>
                  <properties>
               <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
               <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
               <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
               <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
            </properties>
     </persistence-unit>
</persistence>Can you please tell me why is it so ??

How to configure Oracle SSO for OBIEE

Hi all
Can anyone help me saying how to configure Oracle Single Sign-on with OBIEE?
Basically I want to enable a common login for Dashboard and answers using SSO.
I am using OBIEE 10.1.3.4 on a Redhat Linux
thanks in advance

Hi...
See this, hope this what you want...??
If not .. ignore...
Thanks & Regards
Kishore Guggilla

How to Configuring external certificate for MEP

Similar Messages

Maybe you are looking for