How to confirm the alerts automatically in the internet mail?

Hi,gurus:
I wanna know how I confirm the alerts automatically in the internet mail.Now we have to navigate to the alert inbox to confirm the alert,but can I do it in the internet mail? I have confirued the parameter in ALRTCATDEF->CONFIGURE->SETTING->INBOUND PROCESSING,but it didn't work.
Thanks in advance.

hi,
I checked the library,and it says:
Confirming Alerts by Internet Mail
When an alert is sent by Internet mail, the Internet address of the alert user entered in alert configuration is entered as the Reply To address of the mail. An alert ID is inserted into the text of the mail. When the recipient answers the mail from the alert system, the alert is confirmed automatically. Inbound processing sends a status mail to the sender stating either that the alert has been confirmed successfully, or that an error has occurred. The alert ID must be included in the body of the reply mail.
My question is: How to reply the mail?Where do I write the the alert ID?any ideas?

Similar Messages

How to save the Alerts obtained from the Alert profile

Hi all
I have an issue- I want to save alerts obtained daily for the specific alert profile.
Are the alerts saved in the table.
I want to have the alerts created on the date wise with all the specific informations such as for which material, orders and quantity etc..
I am basically using the order alerts - for finding out the excessive orders from the alerts. I want to have a details of the alerts created on each date wise.

Hi Jagadish,
If you have used 'Database Alert' type then the alerts generated will be automatically stored and you can always view them in he Alert Monitor. In fact, after you take action, you have to schedule a program to delete those alerts.
Please refer this white papaer which gives one example of Database alert type and how you can set up an alert profile. Hope it may be useful for you.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/supply-chain-management/implementing%20the%20alert%20monitor%20functionality%20using%20macro%20alerts%20to%20highlight%20custom%20alert%20situations%20in%20apo%20dp.pdf
-Srinidhi

How do you load artworks automatically into the indeisgn CS3

Hi All,
How do you load artworks automatically into the indeisgn CS3. Is it through a script or any other way.
Thanks
Devakanth

"artworks" is a bit vague...can you expand?
File > Place is the usual way, but there are times when cut and paste is fine or better.

HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

You are most welcome

How to create Oracle Alert without metioning the email address in To Field

Hi,
I just wanna know that how to create Oracle Alert without metioning the email address in To Field.
Please help thanks.

If you don't enter anything in the email field, the alert email won't go out.
If you just want to test or if you plan to use the history, you can put a non-existant email there.
The alert will fire anyway.
Hope this helps,
Sandeep Gandhi

How to advoid Pdf attached files turning into winmail.dat file causing incovinience opening them? And why does the phone automatically changes the file???

The first time i opened the mail, the mail loaded the attactment as pdf file and i was able to open it without any problems. But then when i tried to open it again, i watched the phone automatically turned the pdf file into winmail.dat without any of my control. Since then, i werent able to open the file anymore! And this was lucky that i was able to see it as pdf file - all other attachments i have recieved since using my new ip6 all turn into winmail.dat
this is really incovinient and frustrating for work. i cant believe i cannot just open a pdf file as a pdf file on my ip6 in the emails i recieve. I was on ip4 before this and never have anything like this happened.
Solution needed asap please.
Thankyou!

Hi Jnkm,
I'm sorry to hear you are having issues with your new iPhone 6. If you are getting a winmail.dat file instead of a PDF, you may want to see if it may be the issue noted in the following article:
iPhone, iPad, or iPod touch does not display attachment in email - Apple Support
Regards,
- Brenden

Is there a way to change the alert tone for the find my iphone app?

Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!

Welcome to the Apple community.
Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

HT203242 I've tried all of the suggested solutions, but I still can't get my cd drive recognised. If I delete the driver and rebot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive

I've tried all of the suggested solutions, but I still can't get my cd drive recognised on my laptop. If I delete the driver and reboot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive, which is not accessible and neither is the CD drive

I had the same or similar problem after installin iTunes 11 on my Acer Laptop with Vista. The new iTunes ran but I
completely lost access to my CdRom/DVD drive. Error Code 19 was displayed in Windows Device Manager. Found out
this is more widespread of a problem than expected. After trying several forum recommended fixes, the Only thing that gave me back my CdRom drive was doing a Windows Restore to a date prior to iTunes 11 install. I got my drive back but it also restored me to the prior 10.0.7.21 vers of iTunes which no longer worked due to missing files. iTunes help
recommended a Reinstall. I am reluctant to do that for several reason. That's where I am at for now until I find out if there are any other risks for using iTunes 11 vs. Registry Errors vs. Losing access to my CdRom drive. Brad

How to avoid messages going automatically to the archive folder in Apple Mail?

Dear list members, I've been using Apple Mail (version 7.3 (1878.6)) on my MacBook Pro 13" (9,2) (MacOS 10.9.4) for years to integrate my GMail, university, and other e-mail accounts in the imap mode. Since some weeks, Mail is behaving odd: some messages are sent automatically to the archive folder. That's quite annoying, as I have to move them manually back to the inbox folder, and sometimes I mess some messages. I did not change any config in Apple Mail or my e-mails servers. Could you please help me solve this problem? Thanks.

The Archive folder in Apple Mail is linked to the All Mail "label" in Gmail. A label is treated like an IMAP folder, but it really isn't the same thing.
In case you weren't aware, Gmail saves every email you send or receive inside the All Mail label. In Gmail, you can tag a file with multiple labels. So, a file that comes into Gmail appears in two places at once, the Inbox and All Mail. When you trash a file, the Inbox label is removed, but it still remains in All Mail.
Previously, the All Mail label was hidden from you in Mail. Apple has been trying to make Mail work with Gmail, but that hasn't been going well.
I have never had a problem, but I have both Gmail and Apple Mail set up such that any email I trash actually gets deleted and not stored on the Gmail server. I also have it set to no display the All Mail folder at all. This may not be a fix as others have similar setups, but have problems with Gmail.
This is how I set it up. I followed the original article, not the Part Deux article. However, you don't need to change the IMAP path prefixes or the label names in Gmail settings. I just have the part where I configured it to delete the emails when I trash them, and hid all the Labels I didn't care to see in IMAP.
Remember, this may not resolve your problems. I don't know of another "fix."

In mail how do I get the latest entries to appear at the top automatically, at the moment I have to move the cursor from the bottom to the top to read the latest email?

In mail how do I get the latest emails to appear at the top of the column automatically. At the moment I have to scroll up from the bottom oldest entires to find my latest mail arrivals

What device are you using?
I assume you are talking about something other than the iPad?
Is there a sort order above the date column? Clicking on this can switch between Ascending and Descending order.

How can I re-name the name the system automatically gave the new iPod I connected to my iTunes account? It did not give me a choice, but automatically named it.

I got a new iPod Nano for my 80-year-old father who lives with me. I already uploaded his cds to my iTunes account, but when I connected the new iPod to my Mac to put his music on it, the program automatically named his iPod with MY name. I want to differentiate it from my iPod Nano, but it never gave me a chance to give his iPod his name instead of mine. He will not have an iTunes account; I will handle uploading his music and managing his iPod for him, but I need it to set up under his name, not mine. My iPod, iPhone, iPad, etc. all sync automatically with my entire iTunes library. I only want to selectively upload music to his iPod. How can I rename what iTunes is calling his iPod? Help! - Judy- Charleston

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

How the system automatically kills the process when I close the browser?

Hi everybody,
I have the following problem: I run a report on the web browser. Suppose the user want to detail on one of the characteristics of report. If this takes long time (there are many records in report) and the user closes the web browser, the SAP system still run the proccess (in SM50 I see the dialog process still working, althrough the user closes the browser). This didn't happen in Excel, means, if the user press the 'Cancel' button when he/she tried to detail on one characteristic, the corresponding process is killed too (I see in SM50 how the corresponding dialog process is removed).
How can I solve this ? Any idea about this?
Thanks in advance.
Florina

Florina,
there is a timeout set for the web session and the session would get automatically terminated after some time ..
Some options are :
1. Use Stateless Templates
2. There is a Web Template setting called "Automatic Session Management" which uses a page wrapper cookie and kills the session when the person navigates from the page.. - <b>have changed it from previous answer after seeing Anil's post - apologies</b>
3. If you are using EP , you could implement DSM Terminator for the same.
All the above( except 3) will not be suitable for stateful templates , if you want export to excel capability , or printing capability or the capability to save the pages as HTML for local use , you have to use stateful templates.
First you would have to decide whether to use statefull or stateless templates and then depending on the choice made , go for any of the above. In case non of them work out for you , there is another option , but that would include a lot of javascript and using some command line parameters , update this post and I can tel you about the other if required..
Hope it helps..
Arun
Assign points if useful
Message was edited by: Arun Varadarajan

How to run webi report automatically with the current date/system date in webi report

Hi Friends,
I have a webi report which has a date prompt now. Based on the selection that user makes while running a report, he will get the related data for that particular date selection. Now I want to make that date prompt automated that is the report should run automatically based on the system date daily on scheduling.
I want it to run current day automatically without have to go in and pick the date in webi report. I will be scheduling the webi report. Can you please let me know how to achieve this functionality of running a webi report automatically with a system date.
Please let me know if I couldn't make you understand so that I will write with an example.
Waiting for your valuable solutions.
Thanks in advance.
Regards,
Bhaskar

Hello Bhasakar,
1.Create sysdate object in the universe
2.Create another query in webi and select only sysdate object
3.In the original query drag the Day object in the filter pane and choose the "List of values" from another query.and select the sysdate object from the second query.
So your report always will run for sysdate...
regards,
Naveen D

How can I filter alerts shown in the Server app?

In the time I've been running OS X Mavericks Server, the only alert to come up in the Server app's Alerts pane is "Virus detected in inbound email". That's about as surprising as finding that water is wet, so I'd like not to see those alerts. I don't want to turn off the email filtering, I just want don't want to hear about this one kind of event.
How can I filter the alerts in general or this one in particular?

Hi ephraimephraim
I dont know if you found a solutions, but I hit the same problem so here is what I worked out...
Go to: Mac HD/Library/Server/Mail/Config/amavisd
In there you will find a file called amavisd.conf
Make a backup copy of this just incase! Now open the file using TextWrangler (its free from here http://www.barebones.com/products/textwrangler/download.html).
Now scroll down to line 119 and it will look like this:
#$virus_admin              = "[email protected]"; # notifications recip.
#$spam_admin               = '[email protected]';
#$spam_quarantine_to       = '[email protected]';
#$banned_quarantine_to      = '[email protected]';
#$virus_quarantine_to      = '[email protected]';
What I waneted to do was stop the useless "Virus detected in inbound email" emails and just send a copy of the emails to one account that I could keep an eye on, so this is what I did.
First deside on a alias to use, such as [email protected],
Now you can insert that like this virus-admin\@$mydomain its relly is important to add the \@$mydomain this resolves up the top of the file so it should now look like this
#$virus_admin              = "virus-admin\@$mydomain"; # notifications recip.
#$spam_admin               = 'virus-admin\@$mydomain';
#$spam_quarantine_to       = 'virus-admin\@$mydomain';
#$banned_quarantine_to      = 'virus-admin\@$mydomain';
#$virus_quarantine_to      = 'virus-admin\@$mydomain';
now delete the # notifications recip. after the virus_admin to stop the Virus Notifications, then I deleted the # before the spam_quarantine_to, banned_quarantine_to, virus_quarantine_to this "turns on" the line and then add # notifications recip. after them, so you should end up with
#$virus_admin              = "virus-admin\@$mydomain";
#$spam_admin               = "virus-admin\@$mydomain";
$spam_quarantine_to       = "virus-admin\@$mydomain"; # notifications recip.
$banned_quarantine_to      = "virus-admin\@$mydomain"; # notifications recip.
$virus_quarantine_to      = "virus-admin\@$mydomain"; # notifications recip.
Now just create a user on the server called virus-admin of add it as an alias using Workgroup Manger.
Hope this helps

How to make SSIS packages automatically read the input file from a path?

Currently I am using a SSIS package to read data from a .dat file and load it into SQL Server tables.
I am placing the input .dat file on the desktop. In the connection manager -> Browse option, I am pointing this file to create connection.
The file naming convention is like - aSNAP_Data_20140926_P-2014-09-26_07.02.36
However, I need the SSIS package to automatically read the input file from a folder which is located in a remote server. This folder has lots of files where input files are added on a daily basis with the date value in the file name as mentioned above.
I want to schedule the SSIS package to run daily and take the latest file in the folder based on the date.
Please let me know how to do it. Any help would be highly appreciated.....
Thanks in advance.

Hi SQL_SSIS_Dev,
According to your description, you want to get the latest file from a path to a SQL Server table. After testing the issue in my environment, we can refer to the following steps to achieve your requirement:
Create two variables, VarFolderPath stores the folder path in which our files exist, VarFileName hold the value of most recent File Name.
Drag a Script Task from SSIS Toolbox to Control Flow Pane, then select “User::VarFolderPath” as ReadOnlyVariables, select “User::VarFileName” as ReadWriteVariables.
Then Edit Script with the C# code below:
Add “using System.IO;” into namespace.
Add the code below under Main function:
var directory= new DirectoryInfo(Dts.Variables["User::VarFolderPath"].Value.ToString());
            FileInfo[] files = directory.GetFiles();
            DateTime lastModified = DateTime.MinValue;
            foreach (FileInfo file in files)
                if (file.LastWriteTime > lastModified)
                    lastModified = file.LastWriteTime;
                    Dts.Variables["User::VarFileName"].Value = file.ToString();
Drag a Data Flow Task to Control Flow Pane and connect to Script Task.
In the Data Flow Task, drag a Flat File Source with a file in the source folder as all the files have same structure as the File name.
Add the property below the Flat File Connection Manger expression:
Property: ConnectionString      Expression: @[User::VarFolderPath] +"\\"+ @[User::VarFileName]
Drag an OLE DB Destination that connect to the Flat File Source, then configure a table to store the data.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to confirm the alerts automatically in the internet mail?

Similar Messages

Maybe you are looking for