How to connect a graph to a list returned by method?
Hi
jdev 11.1.1.5
How can I connect a graph to a list returned by method???
This is my problem:
I have a vo with several column and 2 more column that in these column I use analytic function to count (col1 and col2) .Know this vo return to many records . I want to have 2 graphs base on this column (col1 and col2) and one table base on all columns.
after drag controler on page as graph because of repeated record with the same value in count column I have not good graph with distinct value.know I want to have a method that return a list or something can iterate and make graph on this .How Can I do ? Is it posible??
(I use this aproach because do all transaction in one query)
Similar Messages
-
How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.
You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg -
how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks
You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI. -
How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
SigveHi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve -
How to connect my mac to tv
Ponny wrote: just a regular TV with an Svideo in.
This could be an issue with that vintage Tv.
Svideo is more fitted for video player input.
Go to http://eshop.macsales.com/ to see what options are available.
If you send them an email, they will help if you don't see option.
Prior to sending them mail, select the exact model you have from the
list of the MacPro's and any other details.
Is there a reason your still at 10.4.11?
Also, Apple Tv streams to my Tv's.
May just have to do a Craigslist search and pick up a worthy Tv with HDMI ports. -
How to connect my nokia 6120c to my mac laptop?
how to connect my nokia 6120c to my mac laptop? i want to use my phone as my modem
Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac. If you receive any cases/questions related to this, please provide the steps mentioned below.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
-In the following example, the APN name "Airtel" is used. This name will vary depending on your operator.
-On your device locate and open the Settings application. This is normally in the Tools folder.
-In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
-Exit Settings. Your device is now ready to be used as a modem for your Mac!
-Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here:
http://europe.nokia.com/support/download-software/device-as-a-modem
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks -
How to connect my mac book pro to network printer Canon IR 2010f?
I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.
The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality. -
How to connect Apple TV with AT&T Uverse
Need help pls. Not sure how to connect Apple TV2 to AT&T Uverse. I know I need to connect one cable to my wireless router, and another cable from the HDMI port to my TV. That part is clear. But my Uverse router is in an upstairs closet, and my TV is downstairs in the living room - too far apart to connect cables to both devices from my ATV2. Do I need to somehow put a bridge router next to my TV, so that I can connect my ATV2 to both my bridge router and to my TV? Thank you
Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices. -
How to connect Apple TV with an iPad ?
How to connect Apple TV with iPad ?
Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices. -
Members only area of website and how to connect it to existing database
I am trying to create a members login section on an existing website. We have a MS Access database of clients, and I need the website login creation to be able to look at our database and only let the person create an account, if they are on that list.
I've successfully completed a walkthrough/tutorial on creating a members only area of a website, but that allows anyone and everyone to create an account. I need a way to force that check before the new user account is allowed. Any help will ge greatly appreciated!Hi,
According to your description, I think your issue is more about how to connect to Access database from your web site, instead of Access development.
Which type of connection do you want to use? Is it ADO.NET?
If so, I suggest you posting in ADO.NET Managed Providers
forum for more effective responses.
If not, you can choose a proper forum based on the type of the connection or your developing language.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to Connect Airport Express to Existing Wireless Network (Client Mode)
I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
So here's the situation:
Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
Do yourself a favor, toss that user manual aside and run these steps.
(Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
Some pointers:
- When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
- I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
<Edited by Moderator>Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
Thanks -
How to connect a Razr to iCal and Address Book w/ bluetooth
How to connect a Razr to iCal and Address Book w/ bluetooth
Hello. I am going to post this in multiple forums because I searched but couldn't find anything on how to sync my Razr with Tiger's iCal and Address Book so this is the How To.
First, download the software Pacifist which can be found on www.versiontracker.com. After the download, put your Tiger DVD into the drive, open the packages in Pacifist, and do a search for iSync.app. Drag that app into your Applications folder. Go to www.versiontracker.com again, and download the iSync 2.1 update. Run that update, and after the restart, use the bluetooth setup to connect to your phone. After pairing, the bluetooth setup should say that you can sync your contacts and ical list. Go to your Applications folder and find iSync. Using this application, you can now adjust the settings for your iCal and Address Book apps.
Good luck!Hi,
There's a dedicated forum for Server customers.
Good luck,
S. -
How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
GalynaHi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1) Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K. -
How to connect smartfrom in standrad t-code
Hi expart
pls tell how to connect smartform in standrad t-code
Regards
BhabaniGO to NACE transaction select the application for ex(v3) for INVOICE smartform and click on OUTPUT types, then select a output type from the list and then double click on Processing routines. Here u can find Formname Program name for all different type assigments such as print , mail and etc. u can assign ur Form and Program for respective types .
Then thisis assigned form triggers from standard application.
kranthi -
How to connect c4480 printer to ipad
How to connect my hp c4480 printer to IPAD.
Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
Error in query " Value '' of characteristic is not a number with spaces "
Hi Gurus, I am facing an error in a query with the description: Error Value '' of characteristic is not a number with spaces System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01- Description This error is occuring in Production system only,
-
Product registration & Product installation problems
I recently purchased the full version of LR2 after using the 30 day trail version of LR2. Mac Pro Dual-Core Intel Xeon 2.66 GHz OSX 10.5.7 LR2 accepts the software liscence upon initial setup (confirmation within prompt says product is registered) bu
-
How to display JPG Icons on push buttons
Hi there, I have come to know that some changes are required in registry.dat file to get jpg images displayed on a push button. Please let me know about the changes required in detail. Thanks
-
How to create automatically users&roles in CUA and in chlid systems?
Hi, i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training). i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the s
-
My music app has a little glitch in it. needs to be fixed!!
When i want to peacefully hear music, I click on a song. then, it skips two songs and immediatly go to the playlist. i try ALL the other songs but the same things happen!! please help!!