How to connect a hard drive on Airport Extreme (second edition)

how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

The USB port your Mac is high powered. The port on the AirPort Extreme is not.
So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

Similar Messages

Trouble connecting external hard drive to AirPort Extreme

I now have my AirPort Extreme set up for my wireless network. But I have tried to connect my seagate 1TB powered external hard drive to the AirPort Extreme for file sharing via the USB port. But for some reason even though there's power to the hard drive it doesn't show up in airport utility or in my finder. Do you know how to fix this? It works perfectly fine and normal when I just plug the hard drive into one of my USB ports on my iMac. Can anyone help? Thanks

Connect the hard drive directly to your Mac and launch Disk Utility. Select the drive and click on the Repair Drive button. Once this has finished try connecting the drive again and then launch AirPort Utility and see if the drive shows up.
One thing I've noticed is that if the external drive has any directory errors it won't mount in AirPort.

Incompatibility Issues with connecting USB Hard Drive to Airport Extreme

Over the last few days i have been fiddling around with my new Airport Extreme Base Station N router. I can connect a printer and use the internet through it seamlessly. I can even share two of my hard drives through a USB hub, however, my Maxtor 500 gb One Touch 4 HDD will not connect with my macbook through AEBS. It is only this drive that is not working with AEBS and it is the one i need to be connected and sharing. If i plug my 500gb Maxtor directly into my macbook it works fine, i can read all the files. This drive is formated as Mac OS Extended (journaled).
I am about to give up on this because i have tried everything:
1. Reformatted HDD
2. Downgraded Firmware
3. Searched Forums for advice
4. Reconfigured AEBS in, i think, every way possible
So, these are most of the things ive tried and so far there is no solution in sight. I have one hypothesis: my particular HDD (Maxtor 500gb One Touch 4) is incompatible with AEBS at this time, but it is possible that a future firmware update could fix this.
Does anyone have any advice? I'm lost and disappointed. Please help, thanks.
Message was edited by: benjaminwooda

Chances are pretty good that the power draw of your external drive is just at the "tipping point" for what the USB port on the Extreme can deliver. Powered USB hubs are inexpensive and should help in this situation.

Connect to hard drive on Airport Extreme while on a different network?

Is it possible to connect to my external hard drive that I have plugged in at home, on my personal internet, through an airport extreme, when I am at school for example or somewhere else?

OK, then you can just set up Back to my Mac on your AirPort Extreme. Then, in the "Shared" area of the Finder, your AirPort Extreme will automagically appear, even when you aren't on your own network.
http://support.apple.com/kb/HT3486

How to deactivate a shared Hard drive on Airport Extreme - keeps sleeping

was curious if anyone one knows how to temporally deactivate a shared Hard drive on Airport Extreme - keeps sleeping every 30mins and have to wait 12 second for the drive to spin up and wait for the beach ball to stop spinning. Getting really aggravating.... Thanks

The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
The AirPort can only share drives formatted in HFS+ or FAT32.

Can't add hard drive to Airport Extreme

I wanted to add an external hard drive to Airport Extreme and I can't get it to show up in my net work. If I go to the configuration program for Airport Extreme, I can see that the base station has identified that hard drive (a Lacie 750 mb drive). Any suggestions?
Message was edited by: Karlhan

I have the exact same problem with one twist I tried adding an 8gb memory stick instead of a spinning hard drive. Airport utility recognizes it but it does not show up on any of the computers.

Usb hard drive and AirPort Extreme

I have been using an external usb hard drive connected to my Airport Extreme to store music which is then picked up by a Sonos system to play music even when my iMac is switched off - has been working great. However I became aware recently (and I think this pre-dates upgrading my iMac to Mountain Lion) that my external hard drive no longer shows up as a shared drive within Finder. If I go into Airport Utility / Edit / Disks - 'enable file sharing' is checked. Disk Utility doesn't see the drive but I'm not sure that really means anything as a network drive rather than a drive connected directly to the iMac.
Has some recent upgrade disabled network drives on Airport Extreme's (ie assuming we are all now backing up to iCloud so don't need it)?
Thanks

OK, I feel silly on this one.
After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
Hope that helps.

File transfer speed in Shared USB Hard Drive via Airport Extreme

I' am planing to buy one of this, but first I need to know what kind of file transfer speed I can expect when sharing USB drive via Airport Extreme 1000Mbps Ethernet.
Thanks.
Message was edited by: Robert81

most likely 14m/sec but normally 10.5 this is ethernet wired and usb attached. wireless would be about 8M/sec
Wired is good enough I use it for Finder copy frequently.

How do I use a seagate external hard drive with airport extreme?

I have a 1tb Seagate external hard drive and I connected it to the USB port at the back of my Airport Extreme. I opened Airport Utility and am now lost. How do I access the hard drive?
(I have a Macbook Pro running os x version 10.8.2)

The external hard drive must be formatted either in Apple's HFS+ or in Microsofts FAT32 in order for it to be recognized. You can format the drive by connecting it to your Mac and bringing up "Disk Utility".

Bonjour - Connect Windows 7 to external hard drive on Airport Extreme

I have to use a laptop with windows 7 for work and I want to back up to a hard drive that is connected to my airport extreme station. I downloaded the bonjour print services and I had the printer set up in a minute. I can't figure out how to connect to the external hard drives that are connected to the airport extreme station though?! Obviously bonjour print services is only helping you with the printer. I couldn't install an earlier version of bonjour for windows because of the bonjour print service installation.
Any ideas how I can connect to those external hard drives? Thanks!

Thank you. I probably should have figured that out myself, but this did the trick. I am also connecting a new hard drive to my airport extreme. The mac and pc don't see the drive because of the NTFS format. This hard drive will be used for PC business related files only, but I still want to access it using my wireless network. Paragon is supposed to do the trick. I am just wondering if paragon makes the harddrive useable for both, the pc and the mac.

External hard drive on Airport Extreme - how to eject it?

Hello: I just connected a UBS hard drive to the Airport Extreme and it works great. I just don't know how to eject it safely, as I would connecting it to my computer (drag to trash and it turns off). Can anyone let me know how to do this?
Thank you in advance!

Welcome to the disussions!
When you open the drive, it should appear as an icon on your desktop.
When you want to eject the drive, right click the drive icon on your desktop and then select "Eject xxxxx". Or, if you prefer you can simply drag the icon to the trash.

How can I set up a back up hard drive on airport extreme

I have an external harddrive that was plugged into my airport extreme. Apple seemed to eliminate my abilty to back up wirelessly in one of the updates. How can I set this up again? Does anyone know a way around this?
Thanks,

Ah, I remember those links now. I was thinking something along the lines of:
Never consider any computer a data storage device, rather a data creation ,sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake.
Never backup your data exclusively upon magnetic hard drives or flash storage, nor consider same since magnetic storage degrades over time even under ideal conditions.
Store important data on multiple servers on multiple continents.
Burn important data onto multiple copies of archival DVDs and store same in cool dark fireproof safes, multiple places.
Don’t burn data onto junk DVD’s purchased from consumer level electronics stores. These are not archival long life DVD’s nor reliable, nor trustworthy. Archival DVD blanks such as Taiyo Yuden, rated for 100+ years are what the pros use, these are made by JVC and are professional grade DVD blanks.
Most people have never heard of archival DVDs, however their cost is only 30% more than junk-level DVD blanks which are only rated for 5-10 years. Also the reject rate on the inferior DVD is around 15%, the cost is almost identical between the WORST DVD blanks and the BEST DVD blanks.
Most importantly know that 2 copies of your data is 1, and 1 is none, and 1000 copies stored in one place or building, is also the same as none due to possible fire.
Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and you should keep a cloned and updated hard drive handy at all times to return to immediate productivity and utterly avoid programs and parameter reinstallation. Nothing is quicker than taking out a dead HD and tossing in a new updated cloned HD for getting back to 100% in under 20 mins!
Decentralized Omnipresent Data (D.O.D.)
(something I coined an age ago)
Backing up data to:
Multiple HD in multiple locations
On multiple servers on multiple continents, private and public websites, anonymous data farms. (very easy actually)
Burned onto archival optical and magnetic storage
Have unclassified data possessed by multiple people in multiples places.
When your data becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances, you have Decentralized Omnipresent Data (D.O.D.) protection rivaling that of large governments.

Hard drive and airport extreme connection problem.

Hi folks,
I have an airport extreme and a WD 1TB pasport for mac hard drive. I had it connected for ages and used it to load movies onto to keep my macbook empty. I had no problems accessing it wirelessly through Finder until today when i configured the extreme to run at 5ghz. When i try to connect now, it tells me that the ip address is wrong but im connected to the extreme for internet. Any clues or solutions?

your Airport Extremes ip address is the red square, Then your going to copy that
So in the red box instead of Http:// we are going to put ftp:// then you should get
a pop up say connecting to server and I hope you do get that.

How do I remove an external hard drive from airport extreme using airport utility 6.2

I want to remove an external drive from my airport extreme but unsure how to do so (apart from just unplugging it). I need to take it away and hopefully plug it back in later. Any advice would be appreciated.

Unfortunately, AirPort Utility 6.2 does not provide you with the option to "unplug" a drive.
If the drive is mounted on your desktop, simply drag its icon to the Trash.....or.....right-click the disk icon and choose the Eject option.
Now you can disconnect the hard drive from the AirPort Extreme.
If the drive does not appear on the desktop, then you can simply physically unplug the drive.

How to setup a Wireless Hard Drive on Airport Extreme to access on anywhere

Is there anyway to access a Hard Drive connected to my Airport Extreme via USB from anywhere? It works great on my local network but would like to be able to access it anytime anywhere? Is there an application I need and will I also be able to see everything on my iPhone?

apple doesnt sell hard drives. Look on newegg.com or macsales.com. Any 2.5" that is 9.5 mm or less in height will fit. Here are installation instructions: http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+Hard+Drive+Rep lacement/7513

How to connect a hard drive on Airport Extreme (second edition)

Similar Messages

Maybe you are looking for