How to connect a pc via Ethernet to an Airport Extreme

For about a year I have had an Airport Extreme running my iBook laptop on wifi and the iMac on Ethernet. I also have an IBM Thinkpad (T/P) running Windows 2000 which I wanted to connect via Ethernet cable to the AE and get on the internet to use various ham radio applications written for peecee's only. So far I have not been able to get the T/P to connect to the web, trying every way to get the thing to connect. The T/P is a second hand unit from work and I have no manual for it. There is also little documentation in the AE booklet concerning Ethernet and non-Mac gear. Does anyone have a suggestion as to how I can make this work, or another website that may have more specific info?
Message was edited by: bob.c

You are absolutely right about nothing with Windows being easy..... The ethernet cable is plugged in and I went to Network Connections and followed the wizard. Now I have a small icon on the right side of the bottom bar, looks like two computer screens but only one is green. A right click on it says the local area network is connected and sending 100 Mbps but receiving zero. If I go to Tools/Internet options, I can go thru the Internet Connection wizard for setting up a LAN. One of the pages asks to configure the proxy settings and has two choices: automatic discovery or "Use automatic configuration script" with a box labeled "Address". I don't know what to put in this address but have tried the IP address and the router address: no joy.There is also a check box for Manual Proxy server and I have tried both Yes and No....again, no joy. It's as though the T/P sees the internet doorway but can't bring anything back thru the door! Any further ideas sure would help. Thanks!

Similar Messages

Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

I am a big fan of both the Airport Extreme and Airport Express. In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters. We have a good quality wired Cat5e ethernet network extended between the buildings and offices now. Is this possible and does it seem like a good practical solution? I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas.

Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

Can't connect to internet via MacBook Pro to Airport Extreme

I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

How to connect a Time Capsule to an existing Airport Extreme?

I have an Airport Extreme connected to my broadband internet modem. This Airport Extreme is also connected to my audio system to be used by iTunes.
Recently I brougth my Time Capsule from another location to be included in the Airport Extreme network. I want to continue using Time Machine on the Time Capsule, and iTunes on the Airport Extreme.
I could get this to work, by connecting the Time Capsule to my modem, and setting it up to extend an existing network (the Airport Extreme network). Airport Extreme and Time Capsule are situated next to each other. However, performance of Time Machine was horrible, far too slow. If I connect my MacBook to the Time Capsule by an ethernet cable, it does not work.
When I set up the Time Capsule to create another wireless network, performance of Time Machine is okay. I cannot use iTunes on the Airport Extreme in that case. I have to switch networks for that.
I'm sure it should be possible to have both an Airport Extreme and a Time Capsule in one network, use iTunes on the Extreme, and Time Machine on the Time Capsule. But I do not know how it should be arranged.
Can anyone solve this problem?
Greetings from Holland, Koen

+What surprises me is that with setting 1 (TC joining AX) the Time Capsule has an option to extend the range of the network being joined.+
Yes, but it will only "extend" if you have a newer version of the AirPort Express, the 802.11"n" version. If you have an older "b/g" version of the AirPort Express, you can set the Time Capsule to "extend", but it won't and you'll have problems.
+With setting 2 (AX joining TC) the Airport Express does not seem to have this option.+
This probably confirms that you have an older "b/g" version of the AirPort Express. It does not have the "extend" feature.
+Could it be this option (which I did not switch off in my earlier experiments) which gave me such terribly bad transfer rates to my Time Capsule harddisk?+
That's probably the reason since the older version of the AirPort Express cannot be configured to "extend".

Time Capsule Base via ethernet to an Airport Extreme to extend Wireless

I have set up a new Time Capsule dual band (TCBStn) as a base station (connected to the internet). I want to connect a new Airport Extreme dual band in a family room far away from the base via Ethernet. This family room has an Apple TV to which I want to stream video. I am not able to connect the AE via the Airport Utility as the Airport Utility does nor recognize the AE.

My recommendation is to configure your two base station as a "roaming" network. This will allow wired/wireless clients to connect to either and still be able to "see" each other for sharing.
Please start by powering-down all of your network components as follows:
o Power-down the modem, Time Capsule (TC), AirPort Extreme Base Station (AEBS), Apple TV (ATV), and the iMac. Note: The power-down order is not critical.
o With all of these components powered down, disconnect both the TC & AEBSn from the network, and then, perform a "factory default" reset on both to get them back to their "out-of-the-box" configuration.
o After both have been reset, remove them from power, and then, reconnect them as follows: modem > \[WAN port] > TC > \[LAN port] > \[WAN port] AEBSn, where ">" represents an Ethernet connection.
o Power-on the modem; wait at least 10-15 minutes.
o Power-on the TC; wait at least 5-10 minutes.
o Power-on the AEBSn; wait at least 5-10 minutes.
o Power-on the iMac.
o For now, leave the ATV powered-off.
In this configuration, both routers will be transmitting their own wireless network, each having a Network Name of something like: Apple Network NNNNNN, where the Ns represent the last six digits of their respective AirPort IDs.
Now, from the iMac, use the AirPort Utility (in Manual Setup) to access the TC to make the following configuration changes:
o Time Capsule > Base Station > Time Capsule Name = TC
o Time Capsule > Wireless > Wireless Mode = Create a wireless network
o Time Capsule > Wireless > Wireless Network Name = <enter the desired Network Name>
o Time Capsule > Wireless > Radio Channel Selection = Automatic
o Internet > Internet Connection > Connect Sharing = Share a public IP address
o Leave all the other default settings (for now).
o Click on Update to write the new configuration to the TC.
While still in the AirPort Utility, select the AEBSn, and then, make the following changes:
o AirPort > Base Station > AirPort Extreme Name = AEBSn
o AirPort > Wireless > Wireless Mode = Create a wireless network
o AirPort > Wireless > Wireless Network Name = <use the same Network Name that you created for the TC>
o AirPort > Wireless > Radio Channel Selection = Automatic
o Internet > Internet Connection > Connect Sharing = Off (Bridge Mode)
o Leave all the other default settings (for now).
o Click on Update to write the new configuration to the AEBSn.
You should now have a basic roaming network. Verify that your iMac can access the Internet while connected to either base station by wire or wireless. Please post back your results.

How to connect an HP 111 designjet with my airport extreme 2nd gen with bonjour for windows

Hi:
I have an HP 111 Tray, plug into an airport extreme 2nd Gen, both works properly running in a PC with windows 7.
When I start Bonjour for windows it identify de printer, but when i continue my printer is not in the list, I used the browse buttom and selected the .inf file that is contained in the driver and Bonjour collapsed everytime
Any one can Help me??
Thank you guys
Hola:
Ante todo buenos dias, os cuento mi problema:
Tengo una impresora gran formato HP 111 Tray (con bandeja) enchufada a un router Airport Extreme de Apple de 2ª generacion, ambos funcionando correctamente y con las ultimas actualizaciones de firmware, el caso es que al abrir el asistente BOnjour para imprimir en red a la hora de seleccionar la impresora no aparece entre las opciones disponibles, a pesar de reconocerla. Al darle a examinar para que utilize los datos de Información sobre la instalación (.inf) que me he bajado de la pagina, Bonjour se queda colgado siempre
He probado desde dos ordenadores diferentes conectados a la red y nada
Alguien sabe como puedo solucionarlo.
La impresora se conecta con un USB al router de Apple
Muchas gracias de antemano

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

I need to backup TC's drive. How do I do this to WD MyBook Live connected to TC via Ethernet?

I need to backup TC's drive. How do I do this to WD MyBook Live connected to TC via Ethernet?

P.S. Solved it exactly the other way around (compared to the original intent). 4 simple steps:
1. Made WD's MyBook Live my primary file server.
2. Made WD's MyBook Live my backup location for Time Machine (moving to it made me reconfigure TM on all home Macs = new full backups and no old data left - but I didn't really need old backups - they were sitting there just in case).
Added bonus - on MyBook Live it is easy to create shares (so that now my general file server is separate from my photo archive and software archive, etc.) - while on TC I had to partition the drive.
3. Moved all files from TC to MyBook Live.
4. Erased all data from TC - so that its drive is clean.
5. Instructed MyBook Live to automatically backup itself to TC.
Job done.

Directly Connect Two Macs Via Ethernet

This has certainly been answered before, but a quick search didn't give any results. So here goes ...
I wanted to connect two macs via ethernet. I use the mount tool in finder "connect to server" all the time with machines on a network, but I've never done with with two macs directly connected.
So I connect them and my first instinct is to check the IP address of the machine I want to connect to. I then go to "connect to server" and type it in using the AFP protocol, but it doesn't work.
At this point I'm stumped and not sure what to do. I don't use the "network" item in the finder sidebar very often but I clicked it, and sure enough the machine I want to connect to was listed, and I was able to connect / mount.
So here's my question ... if I wanted to use "connect to server" tool, or even mount it manually with the mount command, how would I do it? Is it using AFP still to mount and the IP address is just bogus? Something else going on?

But I'm telling you I tried using the IP address ... here, let me try again ...
I find this address on the machine I want to connect to: 169.254.177.122
I put this into "connect to server" on the machine I want to connect from: afp://169.254.177.122
It spins for a while, then says it can't connect. Strangely, if I do a cmd-i on the machine in the network sidebar, it says: nfs:// automount ... into /Network
So are you sure putting in the ip should work? If so what am I doing wrong?
Okay ... plot thickens. When I cmd-i after I connect, it indeed says it is an AFP connect, but it gives the "local" name, say powerbook.local. But then, if I "ping powerbook.local" if gives me back the same IP I tried in connect to server. Huh?
mbp:~ rjcarr$ ping powerbook.local
PING powerbook.local (169.254.177.122): 56 data bytes
Weird. It isn't that big of a deal ... I just like to know what is going on.

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

Deskjet 6940 connected via ethernet cable to Airport, will not print

Hello,
I used to run my HP Deskjet 6940 printer using a USB connection. I recently installed an Apple Airport Extreme so I can print wirelessly. As required, the printer is now connected to the Airport using an ethernet cable, and the green network light is on. On the advice of an HP rep via telephone, I uninstalled all older HP software and reinstalled HP software downloaded from the HP website.
When I try to add the printer on my "System Preferences," it opens a panel that contains the following options:
Protocol: Automatically chooses "line printer daemon--LPD"
Address: Blank but allows me type in the assigned IP address
Print using: No idea.
Two more things: when I open HP device manager, and select 'configure a networked printer, all network confirguation info appears fine but the manager does not allow me to "apply" it. Not sure if this is important but no printer utilities show up in my utlities folder since the new software download. Thanks.
This question was solved.
View Solution.

It looks like you are running a Mac.
First of all, the driver for the Deskjet 6940 is built into the Mac OS. You really didn't need to download extra stuff from www.hp.com (sorry about the bad advice).
Next, let's verify that the printer is on the network. From Safari, select Bookmarks, Show All Bookmarks. Select Bonjour from the left hand pane and verify that the Deskjet 6940 appears on the list of devices found on your network.
Next, follow these instructions to reset the Mac printing subsystem: http://support.apple.com/kb/HT1341
Now add the printer from the Print & Fax applet under System Preferences by pressing the [+] button. The Deskjet 6940 should be listed as one of the Bonjour kind of printers. Select it and then press Add.
I think that should do it.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

I want to connect a Windows PC to an existing Airport Extreme router via ethernet connection. Is there any utility required or can I just plug into the router?

I want to connect a Windows PC to an existing Airport Extreme router via ethernet connection. Is there any utility required or can I just plug into the router? The router is already set up and working with existing iMacs.

thanks for the info. I found apple utilty software on this windows 7 PC but I guess it is not required for sharing internet on exisiting apple extreme. Am I correct that I can remove this apple software?

"Connected to internet via Ethernet" ... but won't work

Looks like I have it set up correctly. Says "Connected to internet via Ethernet", yet I am getting absolutely no internet. Where have I gone wrong?
Oddly enough, it even says this when there is no ethernet cable plugged into it and is blinking amber.
What is going on?

Assuming you have a cable or DSL modem cabled to the Airport Express ethernet port... pull power to both the modem and the Airport Express for five minutes (or up to thirty minutes if you can stand it). Then plug power into the modem and wait a minute. Then plug power into the Airport Express and wait a minute. Hopefully your connection with your ISP will now have reset, and the Airport Express will get an IP address and show a solid green status light.

How do I add more ports to my new Airport Extreme?

How do I add more ports to my new Airport Extreme? What do I need to buy?

Thinking to leave as is for now- one 2013 extreme.
That would certainly keep things a lot simpler.
Does it seem right that using speed test I'm getting similar speeds, no matter if I'm connected via wi-fi, or Ethernet?
A very good sign assuming those speeds are reasonably close to the your plan offered by your ISP. The Extreme itself is capable of much faster speeds than your ISP can ever hope to provide.
I'm thinking that all the speed in the world is not going to change Time Warner Cable, the provider for earthlink cable
Not sure what you mean here. Time Warner provides various plans, some up to 50 Mbps. I get 60+ consistently with this plan. I had a 30 Mpbs plan before that consistently delivered about 35-36 Mbps.
The math is simple. If you download a lot of files from the Internet, a 50 Mbps connection is going to take half as long to download a file as a 25 Mbps connection, for example.
One word of caution though....if you try a higher speed plan...plan to stay, as you will never go back to slower speeds once you have sampled higher speeds. Comcast now owns Time Warner by the way. I don't know whether that will be a good thing or a bad thing.

How can i access my hdd hooked to my airport extreme base station at home, from another place,office,school..?

i have an airport extreme base station ,i conneted a hdd and i want to acces the hdd with my macbook from another place ...office...school....

I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device.

How to connect a pc via Ethernet to an Airport Extreme

Similar Messages

Maybe you are looking for