How to connect a Philips fidelio to airport extreme?

I just purchased an Airport Extreme Time capsule. I cannot connect my Philips fidelio AD7000W to the network. There are no WPS button on the Airport Extreme. There is a WPS printer connection option in the Aiport app menu option but nothing for sound system. Anyone knows how to make the connection ?

Instructions on how to connect the Fidelio to a non-WPS supported router is covered in the User Guide starting on page 13. On step 4 you would enter the specifics for your wireless network. That would be the network name, the wireless security type & wireless password. You will also want to choose the DHCP mode as enabled for these speakers.

Similar Messages

How to connect a hard drive on Airport Extreme (second edition)

how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

The USB port your Mac is high powered. The port on the AirPort Extreme is not.
So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

HT4145 how to connect the i pod to airport extreme

I am trying to figure out how to connect to my airport extreme from my ipod- anyone who can give me a stepby step answer?
I am not sure which operating system it is...
Thanks!

If the AirPort Extreme is allowing other devices to connect, it is not the issue.
Follow the iOS Troubleshooting Guide for Wi-Fi Networks and Connections
http://support.apple.com/kb/TS1398
You will be better served to post in the iPod support area for questions about the iPod. Post here:
iPod

How to connect a ADSL router to AirPort Extreme?

Hallo,
my local internet service provider forces all costumers to use their modem/router to connect to the Internet using a DSL connection.
I have one external public IP (v4) and the router has an editable IP for the LAN set to 192.168.1.1 .
The ISP router can act as DHCP server and NAT; I can disable the DHCP.
What I would like to do is connect it to the Airport Extreme WAN port and give all the control to the Airport extreme: I want to use his DHCP server, NAT, port forwarding etc.
My problem is that I am able to have Internet connection only if the ISP router has DHCP control and Airport Extreme is set to Bridge mode.
In this configuration, in the Airport Internet configuration panel, the connection is set to Ethernet, IPv4 is using DHCP, Airport IP is 192.168.1.133 and the ISP router has 192.168.1.1 . I also have the DNS IPs set to the ones suggested by the ISP and Bridge mode.
In this way it works: all computers can share Internet connection.
What I am trying to do is:
- disable DHCP in the ISP router;
- in the Airport extreme Internet panel I choose to manually setup IPv4 and I type the same vales it is getting when set to DHCP mode: 192.168.1.133 for the Base and 192.168.1.1 for the router using the ISP dns and I select Share pubblic IP. In the DHCP panel I choose 10.0.1 class.
I save changes and... I got that Internet is no working anymore and I cannot access the ISP router control panel.
Does anybody have suggestion about things to try to not use ISP router DHCP or configuration changes I could try?
Thanks in advance for any help about it!

Thanks for the reply,
at the end it seems that my airport extreme works too BUT with an error message saying "double NAT" and the front led turned to yellow. I have ignored such error because things seems to work and so the led color goes to green.
What I had to do here is:
- set previous router to IP 192.168.1.1
- turn off DHCP on my previous router;
- leave on the NAPT (NAT) service on previous router and set it with start and stop address to the same IP I am using for the Airport Extreme (192.168.1.100);
- open all ports and services on previous router by faking the mac address of the Computer's NIC I was using to configure router. I say faking because previous router wants to know for which computer the ports have to be open, so I had to use the same mac address of the Airport extreme. I cannot type it, previous router will get it automatically when configuring it.
- on the Airport Extreme, Internet side, I had to manually configure Internet options using Ethernet mode: I set the IP 192.168.1.100 for the Airport base. Then I have enabled DHCP on class 10.0.1.x .
Airport extreme seems to work with all features now, I hope that "double NAT" warning will not create any trouble. Anybody knows about that?

How to Connect a Thinkpad to the AirPort Extreme?

I have an AirPort Extreme router which I have been happily using for wireless internet access on my Macbookpro. Now my wife, with an IBM Thinkpad, with WindowsXP, wishes to use the same wireless access. The AirPort Extreme Setup Guide says that she should go to Start>Programs>AirPort. But she does not find AirPort there. What should I and she do (in babytalk please)? We tried, using our flash drives to transfer a copy of AirPort from my Mac to her PC, but that does not seem to work. Help would be appreciated.
Thanks

frankxc, Welcome to the discussion area!
I'm sure that Apple's setup guide is expecting that you have installed the software from the disc which shipped the AirPort Extreme base station (AEBS) onto the Windows laptop.
Unfortunately in my experience the directions for enabling wireless on a Windows laptop varies immensely on what wireless hardware capabilities that laptop has installed and what version of Windows is installed.
I have a IBM Thinkpad and I can tell you that the directions vary immensely from the previous 2 Thinkpads I used.
I would suggest that you visit the IBM web site and try to find directions there.

HT4262 How can I connect 6 computers simultaneously to Airport extreme?

I have tried troubleshooting several ways and the some computers work and others don't. How can I connect 6 wireless computers to Airport Extreme?

Matt
Is it possible to speak on the phone? The situation is so convoluted it might be easier to help me get back on track in person. When I first had this issue I got on an apple site that had a chat room in which I typed in my problem. After several missives back and forth, the apple technician asked for my number and we spoke on the phone. The technician walked me through rebooting the actual airport plug (as opposed to the router box) and got me up and running. Do you know how I can relocate that chat site for technical support?
Thanks
David

How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ?

How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ? This message shows up 3 times when I boot my iMac.

I do have a USB hard drive hooked up to the Airport. I've never created an AppleScript for it. Should I disconnect the USB drive and see if I still get the error message?
Thanks for your reply!

How to set up Guest Network, while Airport Extreme is connected to Satellite Receiver

How to set up Guest Network, while Airport Extreme is connected to Satellite Receiver?

Depending on how you have your AirPort Extreme configured to work with the satellite receiver, it may or may not be possible to enable the Guest Network function.
We will need to check some settings on your Mac or PC, but in order to do that, we need to know what operating system you are using on your computer.
If you have a Mac, click the Apple icon in the upper left corner of the computer screen, then click About This Mac. Post back with the OS X Version number that you see there.

Using ARD remotely connecting to work computer with Airport Extreme...

So I've looked through the forums, over the interwebs, through the ARD PDF manuals online and I'm coming up short. Ugh.
I want to connect from my home laptop to my desktop at my small business where we're using an Airport Extreme for a router. I can NOT figure out how to get this configured to work. We use ARD within the business, so on the same network, no problems. With the router, I'm guessing I need to get the computer setup to have a locked in IP and whatnot but no where can I find the instructions that tell me EVERTHING I need to do. Can someone here point me in the right direction please or hit me over the head with a 2x4 of exact instructions!
Thanks for your time! Shawn

Hi Shawn,
So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
Also these steps are so one person, can connect to one computer at your work.
Open Airport Utility:
go to the dock
Click on the finder
go to the menu bar
Click on the "Go" menu
Chose "Utilities" from the "Go" Menu
double Click on "AirPort Utility"
Access the Base Station:
Double Click on your Airport Extreme BaseStation that is your internet connection router.
a new window should pop up with your Airport Base Station as the Window Name
Configure Static Address for the computer you want to connect to via ARD:
Click on the internet Icon from the toolbar
Click on the "DHCP" tab
For "DHCP Reservations:" Click on the "+" button
For the "Description" put "ARD"
For "Reserve Address by:" set "DHCP Client ID"
Click the "Continue" button
For "DHCP Client ID:" set "ARD"
write down the number in "IPv4" address field
Click the "Done" Button
Configure routing to ARD computer:
Click on the "Advanced" icon from the tool bar.
Click on the "Port Mapping" tab
Click on the "+" button
for "Service:" Chose "Apple Remote Desktop"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Apple Events"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Login - SSH"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "Update" button.
wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
Configure the ARD computer to use the correct IP address:
Go to the computer you want to be able to remotely connect to
On that computer, Go to the menu bar
Chose the "Apple" menu bar
Chose "System Preferences…"
Click on the "Show All" button
Click on the "Network" icon
For the active network connection, (the connection on the left side with the green dot), click on it
Clock on the "Advanced…" button
Click on the "TCP/IP" tab
for the "DHCP Cient ID: field put "ARD".
Click the "OK" button
Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
Find out what your public internet IP address is.
On the computer you wish to connect to over the internet, goto http://whatismyipaddress.com/
when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
At this point you should be able to connect to the computer remotely
connect to the internet from another location.
open Apple Remote Desktop
go to the file menu
chose connect to computer using ip address
set the address to the address to the IP address you wrote down for step 6. 2.
use the same password as you used to connect to the computer at work using ARD.
So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
Also some network connections change. When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
Of corse there are ways around this. But that's kind of another conversation.
Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
Other questions that may help me (or somebody else) understand your problem better:
Which of the pieces were verified as working before the introduction of the AirPort Extreme?
Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
Are you using the same port on the GT704WGB? Have you tried another one?
If the desktop has multiple ethernet ports, are you using the same one?
Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
What category ethernet cable are you using? 3? 5? 5e? 6?

How can I open ports on my AirPort Extreme, from WINDOWS?

I have an Airport Extreme as my router, and I have a Windows-based computer. I need to open ports on the router (ironically, it is for my Apple TV).
However, even though I can use the Airport Utility for Windows (latest version 5.5.3), I cannot open ports from the application.
Everywhere I look, I am supposed to have a firewall tab in the Advanced section, but I do not have it. The only tabs that I have in Advanced are:
Logging and Statistics
MobileMe
IPv6
How can I open ports on my Airport Extreme router from Windows?

Is your AirPort Extreme the only router in your network configuration?

How to setup guest net work in airport extreme

Hi,
i have how to setup guest net work in airport extreme?
i have the airport extreme and the airport base station as a range extantion.
all is workig good :-)/
i the init setup (od the extreme) i setup the router to support also guest network with password.
when i scan the network i canor see the guest network.
also i canot set it up from the air play (win7 sp1)
THX :-)

Mmm, generally you don't need to do much port mapping in an extreme. Not sure I understand you. What does the d-link do?

Connecting Time Capsule wirelessly to Airport Extreme

Hello,
I have just purchased a Time Capsule v7.3.1. I am trying to have my Airport Extreme connect wirelessly to my Time Capsule and then use the ethernet connection "wired" to my Xbox. I am unable to get an ethernet address that works when connected via ethernet. I had two Airport extreme's previously connected via wireless and had my Xbox connected via Ethernet on my one Extreme and things worked fine. It seems that my Time Capsule when connected via wireless to my Airport Extreme isn't getting a valid ethernet DHCP address and I cannot get it to work. When I use the wireless connection on my Airport Extreme it seems to work fine when I access the wireless connection to the Airport Extreme. However, wired does not.. Time Capsule

your secondary router should be placed using the manual button once Airport Utility is launched in "bridge" mode. then configure your ethernet and wireless.

Windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

There are a number of posts related to copying issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

I am a big fan of both the Airport Extreme and Airport Express. In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters. We have a good quality wired Cat5e ethernet network extended between the buildings and offices now. Is this possible and does it seem like a good practical solution? I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas.

Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

How to connect a Philips fidelio to airport extreme?

Similar Messages

Maybe you are looking for