How to connect a SunFire 280R to an HP EVA8000 San.

Hello experts,
I'm trying to connect a Sunfire 280R to an eva8000, I've installed the fibra cards and I've done a probe-scsi-all and I can see all the cards
a san :-
ok probe-scsi-all
/pci@8,600000/SUNW,qlc@4
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 21000004cf780993 SEAGATE ST336605FSUN36G 0438
1 1 0 21000011c62d4362 SEAGATE ST336607FSUN36G 0307
/pci@8,700000/SUNW,qlc@3
************************* Fabric Attached Devices ************************
Adapter portId - 330500
Device PortId 330100 DeviceId 0 WWPN 50001fe150061f0d
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330101 DeviceId 1 WWPN 50001fe150061f0f
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330102 DeviceId 2 WWPN 50001fe150061f09
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330103 DeviceId 3 WWPN 50001fe150061f0b
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
/pci@8,700000/scsi@6,1
/pci@8,700000/scsi@6
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009
I then downloaded the Sun StorEdge SAN Foundation Software I tried to install it but it just stops with status code 8. See output :-
./install_it
Logfile /var/tmp/install_it_Sun_StorEdge_SAN.log : restarted on Monday February 19 14:33:39 GMT 2007
This routine installs the packages and patches that
make up Sun StorEdge SAN.
Would you like to continue with the installation?
[y,n,?] y
Verifying system...
Checking for incompatiable SAN patches
xargs: Child killed with signal 13
Begin installation of SAN software
Installing StorEdge SAN packages -
Package SUNWsan : Installed Previously.
Package SUNWcfpl : Installed Previously.
Package SUNWcfplx : Installed Previously.
Package SUNWcfclr : Installed Previously.
Package SUNWcfcl : Installed Previously.
Package SUNWcfclx : Installed Previously.
Package SUNWfchbr : Installed Previously.
Package SUNWfchba : Installed Previously.
Package SUNWfchbx : Installed Previously.
Package SUNWfcsm : Installed Previously.
Package SUNWfcsmx : Installed Previously.
Package SUNWmdiu : Installed Previously.
Package SUNWjfca : Installed Previously.
Package SUNWjfcax : Installed Previously.
Package SUNWjfcau : Installed Previously.
Package SUNWjfcaux : Installed Previously.
Package SUNWemlxs : Installed Previously.
Package SUNWemlxsx : Installed Previously.
Package SUNWemlxu : Installed Previously.
Package SUNWemlxux : Installed Previously.
StorEdge SAN packages installation completed.
Begin patch installation
Patch 111847-08 : install_it: Patchadd failed with a status of 8
Could any one point me in the right direction I am new to san configuring I done it once before but it was just a case of going through a series of notes, Thanks for all your help (I will answer all question tommorrow as i' m off for the reset of the day)
Thanks

Taken from sunsolve, maybe useful for you.
Installing StorEdge SAN patches -
patch 114475-01 : Installed Successfully
patch 113767-02 : Installed Successfully
patch 113766-02 : Installed Successfully
patch 111847-07 : Installed Successfully
patch 114877-01 : install_it: Patchadd failed with a status of 8
This software failed to completly install.
It may not be safe for the system to remain in this undetermined state.
Would you like to rollback your changes ? [y,n,?]
Resolution: Top
Normally, this is the recommended action. But if the patch
that fails to install is 114877-xx or 114878-xx, then a
rollback may not be necessary.
Both 114877-xx (Solaris 8) and 114878-xx (Solaris 9) patches the following
packages: SUNWjfca, SUNWjfcax, SUNWjfcau, and SUNWjfcaux.
The packages and patches are drivers for the JNI 2GB PCI Single FC Network
Adapter and JNI 2GB PCI Dual FC Network Adapter fibre-channel that have
Sun StorEdge SAN 4.x Foundation Suite compatible FCODE.
If server does not have this type of host bus adapter, then SUNWjfca,
SUNWjfcax, SUNWjfcau, and SUNWjfcaux packages are not installed on
the system. The patch will fail to install causing install_it script
to prompt for a rollback.
For this specific situation, it is okay to respond no to the rollback
and let install_it script proceed to completion as the patch is not
required.
Would you like to rollback your changes ? [y,n,?] n
regards

Similar Messages

Problem adding IBMtape and TS3200 fibre library to solaris 10 sunfire 280R

Hi,
I have IBM TS3200 Fibre library and I’m having problems to connect it to my solaris 10 (and TSM) there is nothing in under /dev/rmt ??
Information:
SunOS tsm 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-280R
HBA Model          : QLA2310
Driver Version     : qlc-20080514-2.28
FCode Version     : 1.14.09
Firmware Version     : 3.03.27 IP
There are 2 drivers and one changer and bout are seen by hardware:
cfgadm -o show_FCP_dev -al
Ap_Id      Type Receptacle Occupant Condition
c3           fc-fabric connected configured unknown
c3::2002000e11116daf,0         tape         connected    configured   unknown
c3::2002000e11116daf,1         med-changer connected    configured   unknown
c3::2008000e11116daf,0         tape         connected    configured   unknown
c3::500601603a201211,0 disk connected configured unknown
c3::500601603a201211,1 disk connected configured unknown
c4           fc-private connected configured unknown
c4::210000203784c0ff,0 disk connected configured unknown
c4::210000203784dff0,0 disk connected configured unknown
I have installed the IBMtape as in IBM documentation is instructed.
All commended out in st.conf, mt.conf and lb.conf.
st driver is not loadet. (rem_drv st)
there is in /devices entrys like this: (du -a /devices)
2 /devices/pci@8,700000/SUNW,qlc@2/fp@0,0/sgen@w2002000e11116daf,1
0 /devices/pci@8,700000/SUNW,qlc@2/fp@0,0/sgen@w2002000e11116daf,1:changer
What is sgen@??
So the hardware sees the library but the os dos not compute… any idea how to get the drivers working and something under /dev/rmt?

You could experiment with giving OBP the absolute path to that USB device, but I doubt you'll be successful. The Sunfire 280R (same hardware as the Sunblade 1000, Sunblade 2000, and Netra 20) design expected USB to be only for keyboard and mouse, not for any storage devices. If booting ever works manually from a USB stick, then you could create a custom alias for the device.
Try an experiment by using a CD or DVD of an older release of Solaris 10 instead of the current release.
[http://www.sun.com/software/solaris/releases.jsp|http://www.sun.com/software/solaris/releases.jsp]
The earlier ones need fewer hardware resources. I also recall a few forum posts that seem to suggest the bootblock structure on the CD's and DVD's of those earlier releases was more compatible with older hardware.
You might also need to get yourself a copy of the OBP 4.x Command Reference Manual, document No. 816-1177
[http://dlc.sun.com/pdf/816-1177-10/816-1177-10.pdf|http://dlc.sun.com/pdf/816-1177-10/816-1177-10.pdf]

No OK prompt RSC PGX32 Sunfire 280R

This is a bit chicken and egg.
I have just installed a second hand PGX32 graphics into a sunfire 280R that has previously been administered by RSC. How (please be verbose) do I get the server to output to the graphics card? I don't know how to get to the OK prompt using RSC to turn off RSC! I also have a USB keyboard and mouse. I am using the RSC gui client on windows and connecting to RSC using ethernet. Telnet to RSC works but I assume I can't telnet to the OK prompt?
Thanks,
Tim.

Yes, you can telnet to the ok prompt.
Once you are the rsc prompt type "console" to get to the ok prompt (assuming its not booted).
If its booted, you'll need to type "break" first.
Type "~." to get back to the rsc from the console
Personally I would leave the console on the rsc as its the most useful configuration for remote management.
But if you do want to change it, you need to do
setenv output-device screen
setenv input-device keyboard
Alternatively, you can do the same thing from the os level using the eeprom command.

Installing Solaris 8 on a SunFire 280R

The SunFire 280R has 11 external disks. Disk 11 has Solaris 9 installed.
In attempting to install Solaris on another disk, the following message appears at the command "boot cdrom" command:
krtld: load_exec: fail to expand cpu/$CPU
krtld: error during initial load/link phase
panic-boot: exit to 64 returned from client program.
Program terminated.
Do you have any ideas on how to solve this?
Is Solaris 8 (1/01) unable to installed on a 64-bit machine?
Objective: I'm trying ot have both Solaris 8 and Solaris 9 on the same processor.
Thanks for your insights.

Hello,
I just wanted to point you to the Sun System Handbook page for the F280R, but to my surprise the note is lacking from the current <b>public/free</b> version !!!
This is a quote from the <b>Quick Facts</b> of a formerly public SSH
<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
Solaris 8 1/01requires specific patch installations. See 816-1712 for details.
Solaris 8 10/01 is the minimum OS for 900MHz Cu modules.
</td></tr></table>
<b>READ ME: Important Patch Installation Required Sun Blade 1000 Sun Enterprise 280R</b> is available from docs.sun.com.
The Blade 1000 and the Sun Fire 280R use the same systemboard, but a Enterprise 280R doesn't exist.
Either get Solaris 8 7/01 or Solaris 8 10/01 (for 900Mhz Cu) or a more current version of Solaris 8.
If you have a service contract, you can notify Sun (ssh-feedback@sun.com) about this omission. It's your time and money you have spent when you got stuck ...
Michael

Solaris 10 installation to Sunfire 280R ( HELP ME )

I am Windows, RedHat, and Alpha user but not the SUN.
Really really brand new userFor the SUN. I want to start to use Java.
I am installing the Solaris10 to my USED Sunfire 280R.
I am downloading the Solaris 10 from the SUN web site and buning the DVD. When I boot my system, it is not boot from the DVD, then it is stop at
Fire280r console login :
then I don't know how to do it.
Anyone know how to log in? or Sun has a default password and user name?
Help me please.
THanks in advance.
Kevin

I did the STOP and type boot dvdrom, then reboot the system.
But it can not install and stop in prompt.
boot: can not open dvdrom
if I type .install
boot: can not open .install
what should i do for that?
Thanks in advance.

Sunfire 280R and Remote System Control (RSC)

I have a sunfire 280R machine, and I was wondering if RSC can be loaded onto it. The sunfire page says that it can, but the RSC page lists much newer models as system requirements for the software.
Also can anyone tell me if the RSC provides a windowing environment for the machine (i've been trying to figure out how to get remote access to a linux windowing environment without much success. I've installed cygwin/x on my windows computer)
Thanks!

Hello,
as the name implies the RSC allows to control and monitor the system from remote via serial or ethernet.
The lastest version can be downloaded from
http://www.sun.com/servers/rsc.html
I'm running RSC 2.2.3 on an E250 (the F280R and the other systems listed on the above page are supported as well).
Also can anyone tell me if the RSC provides a windowing environment for the machine. (i've been trying to figure out how to get remote access to a linux windowing environment without much success. I've installed cygwin/x on my windows computer).
No, it just the client/server application to communicate with the RSC hardware.
Michael

How to connect my friends apple notebook through video call

HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

I need to know how to connect my macbook to the tv

I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
Luck
E

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How to connect my Mac book Pro to a TV

How to connect my MacBook Pro to the TV using HDTV cable

I am assuming your TV has HDMI connector.
In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
Hope this makes sense.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How to connect my iPhone and iPad to Apple TV

How to connect my iPhone and iPad to Apple TV

Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.

How to connect my ipod to itunes if my ipod is disabled and my top button is broken

how to connect my ipod to itunes if my ipod is disabled and my top button is broken

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?

How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?
Thank you, Morty S.

I have a perfectly-working LW 4/600 with exactly the same issue. They use localtalk - a long obsolete network connection, that doesn't connect to modern networks, and appletalk as the comm protocol.
I think the only choice you have is to use an old powerPC Mac as print server. You tell me which old Mac you have, with a localtalk connector, or that runs OS X 10.4 or earlier (so it speaks appletalk), and I'll tell you how I've done it for the past 11 years or so.
Right now I use a G4 running 10.4.11, plus an etherMac ethernet to localtalk adapter.
Before, I used a PMac 6100 running LPD server software.

How to connect a SunFire 280R to an HP EVA8000 San.

Similar Messages

Maybe you are looking for