How to connect a tv numeric box to my toshiba videoprojecteur ?

I want to join a peritel tv output , to a svideo or a yuv input.
with the standard connectique, composite is ok (but bad quality) and svideo is black and white.

Hi Jef
In my opinion this is a wrong place for your question. Here you can find mostly discussion about notebooks. Try to contact support for video projectors.
http://www.pvp.toshiba.co.uk/consumer/projectors/home.nsf/pages/contact?opendocument

Similar Messages

How to connect with a cable box

I cannot seem to find any information on how to connect up an Apple TV in a system that has an external cable box. I live in NY City where you cannot get cable TV without the external cable box. Where in the set up (along with my DVD player and component audio) do I fit the AppleTV?
PowerBook G4 15FW800 Mac OS X (10.4.9) 1GB RAM

I've used a 5 X 1 HDMI switch from Monoprice.com and it works just fine. I only have two HDMI inputs on my TV and use one just for the cable box and the other has the 5X1 switch hooked to it. The five ports are: a Toshiba DVR, a Mac Mini, an Apple TV, a DVI to HDMI cable for my MacBook and a spare port hopefully a HD-DVD some day.
One problem is if you calibrate the HDMI port on the TV to a device on the switch, when you switch to a different device the picture may not be optimal for that second (third, fourth or fifth) device. This is not the fault of the switch, rather a function having different devices on one HDMI port.
Rarely, very rarely, when switching to the Apple TV you need to tell it the resolutions for the TV.
Finally, if you are impatient, it takes three seconds or so when switching between devices. Otherwise a switch works great for me.
David
MBP home, AlBook work, TiBook retired Mac OS X (10.4.10)

Qosmio G30-116: How to connect the Sky Digital box to watch TV?

I just recently purchased the Qosmio G30-116 on the understanding that I can connect my Sky digital to the laptop (somehow) and watch and record sky on the laptop
* note: I am not using freeview or normal TV I am using SKY DIGITAL *
usint the supplied converter cable to connect to the video-in on the laptop (video in is like a headfone jack and the converter converts from this to female RCA)
I have plugged it into the laptop then connect a 3 RCA to SCART to it and then into the sky box, when setting up the TV section in Windows Media Centre I follow the instructions until it gets to the point where it scans for a signal, (previous to that I get asked what kind of signal I receive, I select digital but have tried all combinations,) but it doesn't find a signal.
Now I have been told that Windows Media Centre does not support Analogue input and that the connection between the sky box and the laptop is analogue.
Is this correct or not? then, while typing this I have been told by someone else that my laptop is not capable of receiveing SKY DIGITAl as it can't decode it or something. Is this also correct? If not, what am I doing wrong and can anyone help me get this going? And have I been going about this the right way or am I totally up the wrong path if laptop is capable of it?

To start qosmio player
1.switch off computer using on/off blue lit on/off button to close windows operation.
2.make sure that the computer/windows is switch off
3.Now Touch the TV icon (Blue lit button)only or the DVD player ICOn (blue lit button)only. WITHOUT USING THE USUAL ON/OFF SWITCH
4.The qosmio player/engine will switch on instantly without booting windows.
5.TV will launch within 8 seconds and the same for DVD player
6.Pres F1 or F2 for further functions such as screen size,audio,forward.rewind.pause scanning the TV channnels (auto or manual)
7.You can do the same i.e open the qosmio player/TV with the supplied Toshiba/qosmio remote pressing the Live TV button ONLY for instant TV on or DVD menu ONLY for instant DVD player/CD player on WITHOUT USING THE ON/OFF SWITCH ON THE REMOTE.That is very much similar to a standard TV remote just press the TV or dvd menu .
8.If you touch the same icon buttons i.e TV and dvd player during the standard computer usage /windows operating system,IT WILL LAUNCH THE MEDIA CENTER BY DEFAULT.that's what happen to you!
I use the remote from my bed before going to sleep and the same from bed to watch early morning TV news
Qosmio is excellent for the versatility!
Enjoy
min
Message was edited by: min
Message was edited by: min

How to connect satellite set-top box to Qosmio G50 using RCA video-in cable

I want to connect my satellite set-top box to my Qosmio G50 laptop using the RCA video-in cable I received with the computer. (yellow, red, white RCAs and a Jack)
Could you help me where should I plug this cable as I have not found any instructions in the users manual. (The user's manual list this cable on page 21, so it can be used for something somehow for sure!)
(The set-top box does not have coaxial output, and I do not want to include another machine (eg. an old VCR) just to use coaxial connection.)
Thanks in advance for your help!
Sandor.

Hi mate
I found your other thread regarding this theme and it looks like you have answered this yourself.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=44724
Thanks for that!

How to Connect Pioneer VSX-710s Multi- Channel Receiver,Toshiba 27A44 and QIP2500

I have an area that I am setting up for grandkids to relax and I need help in connecting the subject equipment together. If there is someone who is experienced with setting up different configurations, I would appreciate any help. I can get the cable sound coming through my speakers but no video.

If you have sounds coming out of your Pioneer speakers, then your audio connection is correct. You need to have another cord for a video connection going from the 2500 to your TV. The most common connections are a yellow composite cable or a coaxial cord. Once its physically connection, you need to change your TV's input to match whatever cord you used.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

How to connect to a hard drive on a internet box (afp ?)

hello everyone
I have a problem since I am on Lion with my internet box. I pluged a hard drive on it. On my others computers (on Windows, icluding my mac with bootcamp)
The Lion is unable to connect the HD. I can see it on my finder (but not everytime), but it can't connect with it.
I thaught I found the solution here (in french):
http://support.apple.com/kb/HT4700?viewlocale=fr_FR
But it didn't work!
I think my probleme is a the step 3 where I have to make a AFP connection. What is it exactly?
Is it the right solution?
Thanks for help.

That would depend on how your internet box shares out the hard drive. If it doesn't support AFP, then using AFP to connect to it won't work at all. If it does support afp, then go to the Finder and select Connect to Server from the Go menu. For the address, use afp://ip.address.of.router.
You Also might want to check your router help files for how to connect to shared drives.
Apple had to drop Samba, the old SMB/CIFS implementation of Windows File sharing. They wrote their own implementation, but it might not be completely compatible with how your router is sharing out the hard drive.

How to connect any scanner and cash draw box in retail outlets

we have JHS 10g oem copy.how can connect with barcode scanner and cash draw box, print invoice over the JHS? is it any pre defined ADF application available in Oracle for retails?

we have been developing ADF application,we pause development? due to the connection with cashdraw devices( Point of Sale Devices) over the JSF pages! this is our core issue! how can achieve this goal?
we have 40+ outlets with CashDrawer with bar-code scanner! those devices should communicate with our ADF application!
either any such type of devices are compatible with ADF application.please suggest,we can buy.

How to connect input string value to numerical values

Hello,
I am trying to figure out how to connect a single user's input string value to numerical values. Basically I want the user to input the name of a gas that I have a list for (I believe i put the list of gasses in an array>). Then I want to match 2 numerical values "a" and "b" depending on which gas name the user has put in. These "a" and "b" values will be automatically matched with the gas name from a list I put. For example the gas hydrogen has a value of 3 for "a" and 4 for "b. so when the user puts the name "hydrogen" in a string constant, automatically "a" and "b" should be outputted. I will be connecting a and b to a formula
Thanks for any help
Solved!
Go to Solution.

student11 wrote: These "a" and "b" values will be automatically matched with the gas name from a list I put. For example the gas hydrogen has a value of 3 for "a" and 4 for "b".
This sounds a lot like an Enum to me. Make sure you type def the enum to make sure updates quickly and easily make it to all copies of the enums.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Lately, I get a little box asking me how I want to connect to the internet when I am already connected. How do I disable this message box?

I get a little box asking me what sort of connection I want to get to the internet, but I am already connected to the web when this happens. This just started happening, and I haven't changed any settings. How do I get rid this box (it asks me if I want dial up or broadband).

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

How to connect my TC behind a "numericable la Box" ?

I had my box connected to my iMac. I had a "box" from Numericable which includes Wi-Fi. I have been told in my apple store to disconnect my TC from the Mac and to connect it to the Box. Wi-fi is working with the TC, but it is not found for using the Time Machine to save my Mac.

The TC is which model??
If it was plugged into the iMac and working over ethernet that is far superior to using it plugged into the main router.. there is absolutely nothing wrong with continuing with the setup you had.. why are you trying to fix it??
Plug the WAN port TC into the existing router LAN port by ethernet.
Reset the TC to factory.. no backups will be lost.. but this is essential to change over setups.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Redo the setup via the airport utility using all short names.. no spaces and pure alphanumeric. NOT apple names suggested by the setup wizard.
When finished check that the TC is bridged.. if you still have issues please post a screenshot of the summary page ..
This is summary. Click edit and then screenshots of the internet and network tab in the TC.

I have a projector connected to a directtv box that is connected to an older Bose system in my media room. How can i hook up my apple tv to my projector and still get sound out of the bose system without running another sound cable to the bose system?

The audio cable currently is connected to the directtv box. If i hook my apple tv to the projector that means i would have to run a sound cable across my media room. is there any other way?

External speakers need to be connected via optical unless they work with airplay.

How to connect my mobile with GPRS to Macbook?

How to connect my samsung mobile with GPRS to MacBook?

Hope this helps..
http://www.theinternetpatrol.com/how-to-connect-your-computer-to-the-internet-using-your-cell-phone-...
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

How to connect my camera on mac book?

how to connect my camera on my mac book?

Usually an appropriate cable, and other items are
included in the retail box a camera arrived in, so
there should be instructions by that manufacturer
to most suitably attach the camera to a Mac or PC.
Usually the computer will automatically detect the
camera when attached by USB cable; the Mac will
offer to use iPhoto or another application, to view
and handle image processing; or you could choose
to select a different application, or none at all.
For my Macs and two cameras, I do not have iPhoto
handle the images and I choose third-party software
because I don't make libraries of images in the Mac.
However depending on the computer and the camera
the Mac may already have sufficient drivers already
installed; so a software installation from a CD from the
camera maker may not be needed in order to use it.
Since your question is rather wide and gives no info
as to what you have, the replies are also generalized.
Good luck & happy computing!

How to connect a new 27" LED Cinema Display to an older Mac Mini?

I bought a 27" LED Cinema Display (no Thunderbolt) but don't know how to connect it to my wife's older Mac Mini. I presume the Atlona adaptor is the solution, but I haven't bougt one yet.
robbert keegel

The cord attached to the display splits into a Mini DisplayPort, USB, and a MagSafe connector (for powering a laptop).
There is a separate connector on the back of the display for the AC power cord.
<http://store.storeimages.cdn-apple.com/2316/as-images.apple.com/is/image/AppleIn c/MC007_AV1?wid=326&hei=326&fmt=jpeg&qlt=95&op_sharpen=0&resMode=bicub&op_usm=0. 5,0.5,0,0&iccEmbed=0&layer=comp>
<http://store.apple.com/us/product/MC007LL/A>
"What’s in the Box
LED Cinema Display
AC power cord
Printed documentation"

How to get title in Dialog box

How to get title in Dialog box like "Adobe® Connect™ "

Works for me. What happened when you tried?
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #E6E6EE;
overflow: auto;"
title="this text can be pasted into the AppleScript Editor">
tell application "Finder" to display dialog "I need ® or ™ in dialog box text" with title "I need ® or ™ in dialog box text" buttons {"Aha!"} default button 1</pre>

How to connect a tv numeric box to my toshiba videoprojecteur ?

Similar Messages

Maybe you are looking for