How to connect AD595 thermocouple amplifier?

the picture below is my connection of the thermocoupler amplifier, i realise that that is no doted for me to guide as pin number 1,so i according the data sheet and assemble it, the orange colour wire is grounded n yellow colour wire is the voltage supply but when i use digital multimter to test the voltage, no voltage shown, the thermocouple position i put correctly already, is it my grounded pin got problem ? cause my voltage output need to connect to my usb 6008
Solved!
Go to Solution.
Attachments:
DSC00073.JPG ‏439 KB

Direct from the App Note:
The thermocouple wire inputs connect to Pins 1 and 14 either directly from the measuring point or through intervening connections of similar thermocouple wire type.
If you use different wire you will be creating another thermocouple junction that will affect your readings if the temperature of the connection is different from the chip. It should be a small error since your connections are close to the chip, but an additional error nonetheless. Connections of dissimilar metals are what make thermocouple work.
I would omit you connector block if possible and use the thermocouple leads as a direct connection to the chip.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Similar Messages

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • How to connect new Apple TV to analogue amplifier?

    Hi,
    I can use HDMI to connect 2nd gen Apple TV to my HDTV, but would like to use separate stereo speakers. These speakers are connected to an amplifier that only has analogue inputs (no digital optical or HDMI). What is the easiest workaround for this?
    Thanks.

    Does your TV have analog out? If so, that's probably the easiest way. If not, you may be out of luck.

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • SB Live! 5.1 how to connect with my HiFi-Syst

    Hey,
    I want to connect my Soundblaster Li've! 5. with my amplifier.
    The amplifier is connected to two stereo loudspeaker.
    It?s kind of an old amplifier with DIN connections, so I have to use a Cinch to DIN adapter. But the adapter has two cinch cables, one for the left signal and one for the right. (http://www.starcom-edv.de/shop/pics/AudioAdapter_DIN_St-Cinch_St_s.jpg)
    I really don?t know how to connect it to my Soundcard. (http://img55.imageshack.us/img55/4602/picture0032vf.jpg)
    Aditional I want to connect my PC with my TV, so I need one Line-Out for my TV.
    Please hep me!

    Is tha 2 x RCA to DIN intend for playback or recording input (or are those DIN connector wires equal for Input and output purposes)?
    You need another cable: 2 x RCA to 3.5mm (/8") stereo mini jack plug to get the SB and Hi-Fi connected. Connect the PC just the way, you would connect a casette deck into a stereo system (if you know how to do this) so, you get both playback and recording capability or just connect the output from PC into Hi-Fi system).
    For that TV connection, do you mean you would use the TV as output device (PC --> TV)?
    If that's what you're after, then just use the another line-out from your Li've card for that connection, otherwise (TV -> PC) connect the TV output into Li've Line-In or into some of those, possible available, internal analog inputs (AUX_IN, CD-AUDIO, etc.).
    jutapaMessage Edited by jutapa on 0-2-20072:52 PM

  • How to connect iPod nano to speaker system

    How to connect iPod nano to a stereo amplifier?

    Hello Secullinanjr
    Try using an auxiliary cable to connect it to your stereo. Check out the article below for more information and another alternative. 
    Connecting iPod to your home or car stereo auxiliary input using the headphone jack
    http://support.apple.com/kb/ht2167
    Regards,
    -Norm G.

  • How to connect S750 to a Pioneer receiver

    My HDTV only has 2 component input. That's why I want to get a Pioneer VSX-050TX receiver to add several more inputs. Since I already have s750 in my computer, I don't want to get another set of speakers.
    I'm new to receiver and have no idea how to connect it. What I want to do is that the home theatre and the computer can share the s750. And I can also take advantage of the receiver's decode functions. Thanks!

    Most receivers will have 6 analog inputs for 5.1 audio (or 8 for 7.1). You will need two "camcorder connectors" ( http://www.soundprofessionals.com/cg...tem=SP-AVCABLE ) and one "male minijack to male stereo RCA cable ( http://shop.store.yahoo.com/chicagod...autostre2.html ). You can find the second cable much cheaper at RadioShack. Because I don't have 7.1 speakers, I can't tell you what to connect to where, so you'll have to experiment or wait for another poster. You'll plug the minijacks into the soundcard and the RCA ends into the receiver.
    You can connect the satellites of the S750 directly to the receiver's amped outputs, using the receiver's amp instead of the GigaWorks's. Plug the subwoofer into the LFE output in your receiver to the subwoofer in on the S750 amp (you may need another minijack to RCA cable), using the GigaWorks's amp for the subwoofer only. Note that many HT subwoofers have their own amp built in and do not use the receiver to amplify them. The LFE out on the receiver is unamplified.

  • How to connect my friends apple notebook through video call

    HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

    Hi,
    Typing in all upper case is regarded and shouting here.
    Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
    This will have iChat 6 on it.
    This can use AIM, Jabber and Yahoo IDs within the app.
    Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
    If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
    Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
    The Yahoo Account will only do Text chats.
    It also has to be an actual ID registered at Yahoo.
    Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
    So your Buddy will also need a suitable ID or Screen Name  for the relevant service.
    8:16 pm      Sunday; January 19, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

  • I need to know how to connect my macbook to the tv

    I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

    Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
    Luck
    E

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • How to connect my Mac book Pro to a TV

    How to connect my MacBook Pro to the TV using HDTV cable

    I am assuming your TV has HDMI connector.
    In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
    If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
    Hope this makes sense.

  • How to connect my iPhone and iPad to Apple TV

    How to connect my iPhone and iPad to Apple TV

    Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.

  • How to connect my ipod to itunes if my ipod is disabled and my top button is broken

    how to connect my ipod to itunes if my ipod is disabled and my top button is broken

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?

    How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?
              Thank you, Morty S.

    I have a perfectly-working LW 4/600 with exactly the same issue. They use localtalk - a long obsolete network connection, that doesn't connect to modern networks, and appletalk as the comm protocol.
    I think the only choice you have is to use an old powerPC Mac as print server. You tell me which old Mac you have, with a localtalk connector, or that runs OS X 10.4 or earlier (so it speaks appletalk), and I'll tell you how I've done it for the past 11 years or so.
    Right now I use a G4 running 10.4.11, plus an etherMac ethernet to localtalk adapter.
    Before, I used a PMac 6100 running LPD server software.

Maybe you are looking for