How to connect apple tv generation 1 after itunes 11 upgrade?

After upgrading to iTunes 11 I lost connection to my Apple TV Generation 1.  I have tried everything suggested in the forums, but was hoping someone has any other suggestions.
This is what I have allready done:
- Power cycle apple tv
- Power cycle WIFI network
- Power cycle PC
- Disable firewalls
- Reinstall iTunes
- Factory restore apple TV
- Upgraded apple TV genaratio 1 to latest firmware
- Power cycle everything again...
I confirmed that connectivity is fine.  Apple TV connects to internet (youtube etc.).  Also I can ping AppleTV from my PC.
Again, tried everything I could find on the forums without luck.
Anyone have any other suggestions or troubleshooting steps?
Thanks in advance!

I was able to fix this by enabling IGMP broadcasting on my router for the IP addresses of the PC with iTunes and the apple tv.  It appears that bonjour uses this and iTunes recognized appleTV immediately.
I did run into another issue.  After upgrading to the latest firmware Apple TV keeps rebooting/restarting...

Similar Messages

  • TS1453 after itunes upgraded to latest 11.0.2.26 apple tv (1st gen)does not show up anywhere in itunes

    After Itunes upgraded to latest version 11.0.2.26 Apple TV (1st gen) does not show up anywhere in Itunes

    I have the same problem. It was working fine up until the last update for iTunes 11.0.2
    Here's the details:
    I have an Apple TV - first Gen and up until a couple of weeks ago, was regularly playing sync'd iTunes music and videos through it on a daily basis.
    I see other devicess showing up in the "Devices" list in the left panel of iTunes (such as iPad, iPhone, etc.)
    AppleTV used to be there consistently, then disappeared upon update to 11.0.2
    Apple TV also does not show up in the devices tab under the Preferences window.
    I have tried multiple suggestions on the support forum but none have worked.
    Apple TV is able to access the network, is on the same network as the iMac with iTunes library connected. Both are connected to network via ethernet cable (not wifi). Both are able to access the internet (apple tv plays movie prieviews and gets updates). Using the Terminal app, I am able to ping the apple TV's IP number from the iMac and get a successful return. 
    Both have latest software downloads.
    I have tried cold-booting the apple TV, resetting the router, and verified in the router device list that both imac and appleTV are listed as active, un-blocked connections.
    I don't intend to buy an Apple TV 2nd gen or later (since I bought this one and it's not working now due to software update, what guarantee that a later model won't generate the same problem later.
    One last wrinkle, I have a 2 year old and a 5 year old who are jonesing hard for their "dance party" fix.
    Have you ever wronged a two year old?
    It is NOT pretty.
    Help me Apple-wan-kenobi...I can't take the screaming!

  • How to connect Apple TV to ipad2 with air play

    Hi...how to connect Apple TV to ipad2 with AirPlay

    Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
    The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
    I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success.

  • How to connect Apple TV with AT&T Uverse

    Need help pls.  Not sure how to connect Apple TV2 to AT&T Uverse.  I know I need to connect one cable to my wireless router, and another cable from the HDMI port to my TV.  That part is clear.  But my Uverse router is in an upstairs closet, and my TV is downstairs in the living room - too far apart to connect cables to both devices from my ATV2.   Do I need to somehow put a bridge router next to my TV, so that I can connect my ATV2 to both my bridge router and to my TV?  Thank you

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How to connect Apple TV with an iPad ?

    How to connect Apple TV with iPad ?

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How to reset apple security questions after apple takes your call

    how to reset apple security questions after apple takes your call can anyone tell me what to do

    Hi tyler30389,
    You can reset the security questions for your Apple ID by going to My Apple ID and navigate to the Password and Security section to change them. You will have to know the answer and if you do not know them there should be a reset security questions email link. If you do not see one then you will have to contact Apple Support to further assist you. For more information take a look at the article below.
    If you forgot the answers to your Apple ID security questions
    http://support.apple.com/en-us/HT201485
    Regards,
    -Norm G.  

  • How to used apple ID in the iTunes store?

    how to used apple ID in the iTunes store?always the problem was this " This apple ID has not yet  been used in the iTunes store?

    Why can’t I select None when I edit my payment information?
    also you can
    Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
      Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    More details of how:
      http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/

  • I m using window vista32 after itunes upgrade.. itunes crash .. Problem signature:

    i m using window vista32 after itunes upgrade.. itunes crash ..
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          iTunes.exe
      Application Version:          11.1.4.62
      Application Timestamp:          52ddbf7a
      Fault Module Name:          ntdll.dll
      Fault Module Version:          6.0.6000.16386
      Fault Module Timestamp:          4549bdc9
      Exception Code:          c0000005
      Exception Offset:          00062086
      OS Version:          6.0.6000.2.0.0.768.3
      Locale ID:          16393
      Additional Information 1:          a183
      Additional Information 2:          96f68295953afa2675d1551e001cfa2f
      Additional Information 3:          5630
      Additional Information 4:          5482da5e28e2dc79b1d40bd90d8c9b

    Hello there, jasibrar.
    The following Knowledge Base article offers up some great steps for troubleshooting your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    This additional article may prove useful to you as well:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT4623 How can I activate my iphone after i upgraded it?

    How can I activate my iphone after i upgraded it?

    riveranaruth  see the thread you started
    https://discussions.apple.com/thread/4868478

  • My camera connection kit stopped working after I upgraded to  ios5

    My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
    I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
    Any suggestions?

    Actually this sounds the same problem I have on my iPad2.
    I use a cheap copy of the CCK which I got off eBay.
    It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
    Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
    I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

  • How to connect apple TV with 2 Macs?

    Hi!
    I have connected/linked Apple TV with the iTunes library from my iMac (wireless). ..... Now, I have also downloaded some movies from iTunes on my MacBook. So I connected the MacBook (wireless) with Apple TV, but when I open Apple TV in iTunes on the MacBook I just get the choice of two tabs: +information and photos+. How can I move the movies?
    I think it has something to do with streaming, but I don't know how to get there.
    Thanks for any advice!

    At the bottom of Movies on AppleTV, do you see My Shared Movies - these new ones will probably be seen there as a second computer will be streaming only and it's content is selectable under My Shared.
    The top library in Settings>Computers is the sync/stream library, any below are streaming only and cannot transfer stuff to AppleTV only stream it live when the computer and itunes are running.
    Assuming both computers use the same account on iTunes, you could copy the movies from the Macbook (Show in Finder - copy the files do not move them or iTunes gets confused - if you want to delete do it from within iTunes) and add them to the iMac library.

  • Airplay from Windows7 PC to Apple-TV 2 does not work after iTunes Upgrade

    Hi,
    after the latest iTunes Upgrade 10.1.2.17, AirPlay discontinued to work!
    My Apple-TV shows up as speakers, but after choosing the A-TV I get a massage that it can not connect to remote speakers. Unknown error (-15000).
    I have rebooted the A-TV and PC multiple times. The AirPlay function works fine if done with iPhone 4!
    Pleas help! Thanks in advance!

    I forgot to say... Airparrot shows up in your system tray after you install. As long as you are on the same network as your Apple TV, just right click the Airparrot icon and select Apple TV as your Airplay device. Voila!
    http://airparrot.com
    Then hook up your wireless keyboard and mouse and plop on the couch for some supersized web browsing.

  • How to connect my Iphone to the itune using my laptop?, how to connect my Iphone to the itune using my laptop?

    I cannot ofpen my iphone until i did'nt connect to itunes by using cable thrue laptop, i don't know how to connect.

    Sorry, you can't do what you want. So, pick one of the two computers & stick with that computer.

  • How to connect apple tv 2 to pioneer pdp s35

    How do I connect apple tv 2 to pioneer pdp.s35 tv? I connected to one of my pioneer receiver's hdmi ports but when I cycle through the inputs I can't find apple tv.  Thanks.

    Welcome to the Apple Community.
    I don't have or indeed know anything about your receiver, but unless the Apple TV can see an active device and connect via HDMI it won't turn on. You will need to set your receiver to use the correct input and then turn on the Apple TV.

  • How to connect Apple TV to other users at the internet

    Can anyone tell me if I can share a iTunes libary with a friend/brother who also have direct ADSL connection to the internet? We both have a Apple TV device and iTunes, and would like to share the contens with each other. I have already tried the network settings, but until now without luck! Is it possible????
    Thanks in advance

    Perhaps this is a step in the right direction:
    http://lifehacker.com/software/vpn/
    I dont have Apple TV yet but like this idea of an encrypted VPN
    Macbook 2GHZ/2G Ram   Mac OS X (10.4.9)  

Maybe you are looking for

  • My folders just disappeared. They were there yesterday morning, were gone in late afternoon. I restarted ;my computer, didn't help.

    The only thing currently listed to the left of my screen are My email address, Inbox, Drafts, Sent, Archives, trash, and local folders. I had about ten folders that I sorted my email into. They are gone. Clicking on local folders takes me to a screen

  • Itunes not recognising HD space on ipod

    I have an ipod and my girlfriend has a mini ipod which we both use with one version of itunes. I have 9 gigs worth of songs on my 20 gig Ipod and it works fine. She updates from a playlist but can't get more than 2 gig of songs on her 4 gig mini-ipod

  • MSIE and Images

    I'm working with developer 6.0 Patch 1. I've a small form with an image. All works perfectly with netscape 4.6. If I try to run that form from MSIE (4 and 5) I get an FRM- 999999 network error and the browser hangs. All works wit forms without an ima

  • When new update for 17.1.A.1.2?

    I was reading that there are many issues with the touchscreen. Sony won't tell us whether this is a hardware issue or not, but as I heard they are trying to fix this with some updates. When do we get some new updates? On the Z2 Tablet page I still on

  • How to Guide setup CTS+

    Hi, does anybody know an "How to Guide" for Implementing and setup  CTS+ in SAP Solution Manager ? Kind regards Andreas