How to connect Apple TV to old TV (Not HDMI)?

Dear all,
I would like to stream some content on my ipad towards a rather old TV that does not have an HDMI connector.  I thought that Apple TV could help here.
TV is a flatscreen Samsung bought around years 2008.
thankx, lamberly

HDMI is the only supported method. There is no guarantee with any converter, even if it does work you will be unable to play protected content (i.e. iTunes, Netflix) and functionality could cease at any time.

Similar Messages

  • How to connect apple tv to a TV without HDMI

    I have an older HDTV that does not have HDMI. How do I connect the Apple TV. I know you can use a HDMI-DVI cable but what about sound? Any recommendations?

    The big challenge, in addition to sound, is going to be HDCP. In order to minimize copyright infringement (copying) HDCP handshake via the HDMI connection is required. This is needed for Netflix, rented HD material etc. iTunes streaming will still work though.
    Some have mentioned finding HDMI to component conversion boxes on eBay that work, but I have no experience in this area.

  • How to connect Apple TV to Projector with no HDMI

    I have a projector with S-video, rca, and vga connections but no HDMI.  I would like to get an apple tv and use airplay with my ipad 2.  Are there hdmi to rca or vga converters that will work well with Apple TV.  I've searched different things but it's just confusing me.

    Welcome to the Apple Community.
    There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
    HDCP
    HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
    Resolution and aspect ratio
    I'm not aware of any converters that will scale the output from the Apple TV, any TV or projectoe which is used will need to be widescreen and support resolutions of 720p or 480p.

  • How to connect Apple TV with AT&T Uverse

    Need help pls.  Not sure how to connect Apple TV2 to AT&T Uverse.  I know I need to connect one cable to my wireless router, and another cable from the HDMI port to my TV.  That part is clear.  But my Uverse router is in an upstairs closet, and my TV is downstairs in the living room - too far apart to connect cables to both devices from my ATV2.   Do I need to somehow put a bridge router next to my TV, so that I can connect my ATV2 to both my bridge router and to my TV?  Thank you

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How to connect Apple TV to ipad2 with air play

    Hi...how to connect Apple TV to ipad2 with AirPlay

    Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
    The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
    I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success.

  • How to connect Apple TV with an iPad ?

    How to connect Apple TV with iPad ?

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

    how to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

    You need a > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) to plug into the ThunderBolt port and an HDMI cable.

  • HT2534 How to connect to iTunes apps, I do not, in July to conduct a credit card number, but not the button none..

    How to connect to iTunes apps, I do not, in July to conduct a credit card number, but not the button

    Follow the steps in this article EXACTLY:
    http://support.apple.com/kb/ht2534

  • How to connect my CQ60 notebook to TV with "HDMI to RCA" cable?

    Hi there
    I have a Compaq Presario CQ60-213TU notebook computer which has an HDMI port. I bought an "HDMI to 3RCA+VGA" cable from ebay. I was able to connect my laptop to the extenal display with VGA, but when i tried to connect my laptop to my non HD tv it did not connect.
    Has anyone got a solution how to connect my laptop to my tv with "HDMI to 3RCA" cable.
    Please reply asap.
    Thanks

    you said it did not connect. what do you mean. what was displayed? what input did you have the tv on? need more info than "did not connect"
    click Kudos to say thanks if I helped

  • HOW TO CONNECT APPLE EXPRESS TO ATT MODEM

    After multiple calls to ATT and Apple, my AExpress still will not connect to the internet through the Westell modem.  I continue to see amber light blinking, and the scrolling message:  "PPPoE Connecting."  If entering details in "Profile Information" helps, how does one do it, and what does one enter?

    As a computer consultant, I have had many problems with AT&T PPPoE. In a few cases, the only solution was to keep the PPPoE connection on the modem and allow the router to use double-NATing. Not a good solution but one that works for most prople.
    Assuming your are on AA&T DSL, is it possible for you to upgrade to U-verse? One thing good about U-verse is that there is no PPPoE connection and a login name and password are not required.

  • How to connect apple tv 2 to pioneer pdp s35

    How do I connect apple tv 2 to pioneer pdp.s35 tv? I connected to one of my pioneer receiver's hdmi ports but when I cycle through the inputs I can't find apple tv.  Thanks.

    Welcome to the Apple Community.
    I don't have or indeed know anything about your receiver, but unless the Apple TV can see an active device and connect via HDMI it won't turn on. You will need to set your receiver to use the correct input and then turn on the Apple TV.

  • How to connect Apple TV

    I am about to purchase an Apple TV. Want to be certain I understand what I need in terms of cables and understanding wireless connections. Our setup is as follows: An Imac G5 Isight running Tiger / Mac OS X 10.4 11 in back room. We have a modem from Verizon for DSL and a Netgear router connected to our Direct TV via a cat cable,running under house into front room. to receive On Demand content from Direct TV. We are not using the router wirelessly and have the Imac connected through ethernet for the internet. So I do not really understand how wireless works. In the front room we have a Sony Bravia LCD flatscreen, a Denon receiver. I understand I can connect the apple tv to the Sony or the Denon with a HTML cable. What I don't get is connecting the Imac to the apple TV. OH I do have a Airport Express base station. Do I need to purchase something else to help me connect wirelessly? My husband could run an ethernet cable under the house or through the attic but I would like to avoid that if possible. We could decide to forgot the On Demand content from Direct TV as we don't use it too much and use the Netgear WGT624 router to connect wirelessly???
    Can you nice tech smart folks help me ? I really appreciate it.

    Welcome to the  Discussion Forums.
    I'm assuming you are looking for the princples here and not specific set up instructions. I don't believe the method described above is correct and would advise the following:
    It isn't clear whether your netgear router supports wifi or not, if it does simply set up the wifi connection between the router and the tv, the tv and your mac can communicate with each other over a mixed wifi/ethernet network provided all devices are on the same subnet.
    If the netgear doesn't support wifi then you will need to connect the express to the router by ethernet and set it up in bridging mode, again he tv and your mac can communicate with each other over a mixed wifi/ethernet network.
    In terms of connecting your tv, tv and receiver, you have two options:
    connect the tv to the receiver by HDMI and the receiver to the tv by HDMI, or
    connect the tv to the receiver by optical cable and the tv to the tv by HDMI.
    My personal preference is for the second option.

  • How to connect Apple TV to multiple devices

    I have a Pioneer HDTV connected to a Sony VAIO computer through HDMI which in turn is connected to a Sony 5.1 digital receiver through a TOSLINK cable. I have recently bought Apple TV and now need to connect it so that the TV, computer and receiver all all to each other. The problem I have is that the TV has only HDMI out and the receiver has only one digital optical out. What is the best way to connect the Apple TV to these devices?

    Your Tv is unlikely to have HDMI out.
    It may have HDMI in, question is how many inputs.
    The only official way to connect AppleTV 2 to your TV is via HDMI.
    You can send optical audio to the Sony reciever simultaneously.
    AC

  • How to connect Apple TV to Sony str-dg800?

    Need to understand how to connect AppleTV 3GL to Sony STR-DG800 A/V receiver.

    Have you used optical audio cable from apple tv to sony?

  • How to connect Apple TV to DVD blu-ray home theatre

    Hi guys, I am planning to buy Apple TV2 and I was wondering is there setup guide for connecting to HDTV and home theatre system. I currently have LG HDTV and LG DVD Blu-ray Home Theatre. They are connected with HDMI 1.3 cable and I had to get optical cable to get sound from TV to Home theatre.
    How is Apple TV fits into that? I have 1 HDMI slot free on TV and 2 HDMI inputs on DVD system.
    I was thinking just to connect Apple TV to DVD via HDMI? Would that put sound on home theatre system?
    Thank you in advance.
    ddrasko

    You have read home theatre manual about playing sound from external device.
    You doesn't need to connect home theatre to tv at all as you have get video from apple tv.
    Connect video output from apple tv to tv(may carry sound along) and optical cable from apple tv to home theatre.
    That will do. You can mute sound of tv(in case hdmi carry sound along) or using other function(on samsung ) and hear from home theatre sound from speakers.

Maybe you are looking for

  • Comp 3 new user needs help !! (please)

    Not sure which setting to use, have tried MPEG-2 5.0 2 pass and had no audio. Do I need to select audio seperately (eg AIFF 48-16). Anyway, now I can't seem to submit. I've daged and dropped the destination (desktop) and I've draged and droped the so

  • Error When Executing DTP

    Internal error: Invalid Aggregation Info No entry for InfoObject: 0CURTYPE  - contact SAP Message no. RSTRAN000. when i am loading data to DSO using Data Transfer Process i am getting this error. Transformation is also in Active Mode. I dont know why

  • I am new to ipads. How do I set up my ipad to reject/block spam

    I am not computer literate and I just got a ipad for my birthday. I can block out advertising and other spam type of emails on my computer but am at a loss on how to do that on the ipad (mini). Can somebody advise if, and how to, as the manual does n

  • Time Machine backup fails w/error: Backup Volume is Read Only

    This is another Leopard Bug! My Time Machine has always "just worked," but tonight, backup failed. Looking at the error message, it says, "Backup Volume is Read Only." My Time Machine was set up correctly, and has been working fine for quite some tim

  • How do I install Tiger without DVD drive?

    How do I install Tiger without DVD drive on a Powerbook? My Powerbook had some problems recently, the HDD and the Superdrive where gone. I replaced the HD but can not get Tiger installed here because the DVD drive isn't working. I boot right now from