How to connect Apple TV using an application
I´m in a hotel and i want to connect my apple TV, the hotel have an aplication for connect to wi fi, how i can connect my apple TV using this feature
If you have an iPhone 4s or later and IOS 7 or later you should have the AirPlay symbol on the phone and you can mirror the iPhone's display to the Apple Tv.
See iOS: Use AirPlay Mirroring - Apple Support for complete details.
<edit>
Note with the Apple TV and IOS device need to be on the same wifi network for this to work so I'm not sure in this case, trying to connect to hotel wifi, if this will work.
If you have IOS 8 on the IOS device you might be able to use peer-to-peer networking. This lets an IOS device connect directly to the Apple TV without needing to connect both devices to a wifi network.
Similar Messages
-
How to connect Apple TV using redmere hdmi to avr?
I have an Integra DTR-40.2 AVR.
I have an Apple TV 2.
I want to use an HDMI cable with Redmere technology, but I can't seem to get my Apple TV to work correctly.
I have the TV "end" of the HDMI cable plugged into my AVR and the Source "end" in my Apple TV.
Nothing displays on my TV.
Any ideas?
Jim P.I have a Panasonic TC-P50VT25
It is connected to my AVR using HDMI1 port.
My ATV was previously connected to my AVR via the PC HDMI. It all worked just as I wanted but when I replaced the HDMI redmere cable, the ATV is connected to the source end of the cable and the TV end is plugged into my PC port on the AVR I can't get the ATV to work. -
How to connect Apple TV to ipad2 with air play
Hi...how to connect Apple TV to ipad2 with AirPlay
Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success. -
How to connect itunes to use push notification?
How to connect itunes to use push notification from my iphone? everytime when i open any applications i will get a message saying "connect to itunes to use push notification. notification may includes alert, sounds and icon badge"
This definitely works and only takes a couple of minutes. There is no need for backing up or resetting your phone.
Go to Settings/General/Reset/Reset Network Settings -
How to connect my ipad using static ip
How to connect my ipad using static ip?
Using Netgear Router.Go to Setting > General > Network > WiFi > Then tap the blue icon next to your network, from here you can setup a static IP on your internal network.
-
How to connect Apple TV with AT&T Uverse
Need help pls. Not sure how to connect Apple TV2 to AT&T Uverse. I know I need to connect one cable to my wireless router, and another cable from the HDMI port to my TV. That part is clear. But my Uverse router is in an upstairs closet, and my TV is downstairs in the living room - too far apart to connect cables to both devices from my ATV2. Do I need to somehow put a bridge router next to my TV, so that I can connect my ATV2 to both my bridge router and to my TV? Thank you
Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices. -
How to connect Apple TV with an iPad ?
How to connect Apple TV with iPad ?
Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices. -
How to change Apple ID for all applications in iPad2?
I have changed Apple ID via Settings > Store > Apple ID > Sign out my old Apple ID > Sign in with my new Apple ID.... But, by this method, Apple ID in iCloud, Facetime, and iMessage isn't changed follow to my new one! Do I misunderstand about changing ID? and How to change Apple ID for these applications?
PS. I do not want to do hard reset my iPad2
Thank you all for your kindly help ^^Go into Settings > iCloud > Account > Change to your new Apple ID
Settings > Messages > Recieve At > New Apple ID
Settings > Facetime > Change to new Apple ID -
How to connect oracle database using jsf
how to connect oracle database using javaserver faces with connection pooling
Here is one way...
http://jakarta.apache.org/commons/dbcp/ -
How to connect one page using button and by link in BSP
how to connect one page using button and by link in BSP
hi,
use on 'onclick' functionality.
1. In layout, onclick = 'NEXT_PAGE' of the button
2. Capture the event in onInputprocessing,
DATA: event_id TYPE REF TO cl_htmlb_event.
case event_id.
when 'NEXT_PAGE'.
navigation->goto_page( 'URPAGE URL' ). -
How to connect mysql database using xml
welcome to all,
here my doubt is how to connect mysql database using xml file, how to integrate xml file and jsp file and how to access data from dabase using jsp file. can any one help me
regardsShort answer: you wouldn't do any of those things. The first two are meaningless and the third is a bad practice. I have no idea what those ideas were supposed to achieve so I have no idea what tutorials I should suggest to you.
-
How to contact apple support using the 800-number from the Philippines?
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986) -
We need to stream live video to Akamai using RTMP. But, we are trying to connect using ADOBE RTMP SDK (Adobe Media Server Connector for C++ 2.0.1), but have no idea regarding how to connect to Akamai using the SDK. How to make the SDK respond to the server challenges for password etc. If this can't be done using the RTMP SDK, we can use plain C++ for the purpose. But for that too, we don't have any idea regarding the steps involved to make it work. If anyone has any idea on how to connect to Akamai using the RTMP SDK or using plain C++ (a sample code will be very helpful), please help us out. If you can suggest any C/C++/.NET library too which will help us achieve it, we are ready to do so. Thanks in advance.
hi,
I am sorry I can not help you. Could you do me a favor? I know you are using Adobe RTMP SDK.I want to know how to get it.
I tried to contact adobe at [email protected] but it seems to be an invalid email address.if you know efficient way,
please tell me.Thank you very much. -
Hi All,
How to connect the Oracle database using C/C++ on Mac OS X? I have used Instant Client library "instantclient-basic-macosx-10.1.0.3" provided by the Oracle but could not be success. I'm using PowerPC G4, Mac OS X 10.4.9, and XCode version 2.4.1.
Specially Mr Oscar Armanini has done this in C on Mac OS X. Please let me know. I would be very thankful to you.
Thanks,
GhufranHi Ghufran
there are two Metalink Notes on using Instant Client with PowerPc Mac:
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=316497.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCI sample code - cdemo81.c)
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=332588.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCCI sample code - occidml.cpp)
The first Metalink Note uses an OCI examples and it is pasted here below,
in case you don't have a Metalink ID.
The second Metalink Note uses an OCCI example.
I have never used Instant Client (neither on Os X or on other platform),
but I was successful on compiling C programs (no GUI involved) using the
Full Client installed on my PowerBook G4.
I'm a DBA, but I was a developer years ago (about when Oracle 7.3
was considered a giant step forward): I installed the Oracle 10.1 db
(a complicated job for a developer) and I got the Full Client
installed as well, for free, so I was happy to compile one of the demo C sources
(those that you can find in the Oracle Pro*C manuals:
by the way, Oracle Pro*C manuals are really worth reading).
Good luck
Oscar
Applies to: Oracle Server - Enterprise Edition - Version: 10.1.0.3
Apple Macintosh PowerPC
Goal
This article will show you how to install and configure your 10g Instant Client (IC) Software for the Mac.
It will install the following packages:
the Basic package
the SQL*Plus package and
the SDK package
and then test its connectivity to an Oracle database using SQL*Plus.
It will also show you how to setup and test a sample program, cdemo81.c, that uses the Oracle Call Interface (OCI)
to connect to the database.
The sample program is located under the <Instant_Client>/sdk/demo directory.
Solution1. Download the following three (3) files from the Oracle Technology Network (OTN) website.
You will need an account to do this.
Macintosh OS X 10g Instant Client Software
a. instantclient-basic-macosx-10.1.0.3.zip (32,395,622 bytes)
b. instantclient-sqlplus-macosx-10.1.0.3.zip (326,740 bytes)
c. instantclient-sdk-macosx-10.1.0.3.zip (293,913 bytes)
NOTE: The above three (3) files will be updated as new patches are released for the 10g Instant Client software. 10.1.0.3 or later versions (10.1.0.x) of these files may be used similarly with this article.
2. Save the following text into a file called tnsnames.ora:
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
3. Save the following text into a file called sqlplus_script.sql:
SELECT user FROM dual;
SELECT sysdate FROM dual;
SELECT 'successful ' AS TEST_RESULTS FROM dual;
exit;
4. Save the following text into a file called setup1:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
# ===========================================
# DESCRIPTION
# ===========
# This script will install and configure your 10g Instant Client (IC) Software
# for the Mac. It will install the Basic, SQL*Plus and SDK (OCI/OCCI) packages
# and then test its connectivity to an Oracle database using SQL*Plus.
# Once this script has completed, you will need to run the script SETUP2 to build
# and run the CDEMO81.C sample application located under the <IC>/sdk/demo folder
# in your newly installed Instant Client home.
# NOTE: In order for this script to run successfully, you MUST perform any
# necessary actions required under the SETUP section below.
# SETUP
# =====
# (1) You MUST be in a directoy with ALL of the following files
# BEFORE running this script:
# 1 - instantclient-basic-macosx-10.1.0.3.zip
# 2 - instantclient-sqlplus-macosx-10.1.0.3.zip
# 3 - instantclient-sdk-macosx-10.1.0.3.zip
# 4 - tnsnames.ora (configured properly)
# 5 - sqlplus_script.sql (connectivity test)
# 6 - setup1 (this file)
# 7 - setup2 (will run this file later)
# (2) Edit the TNSNAMES.ORA file and update it with the necessary information
# to connect to a database on your network. Be sure to note the comments
# in this file. You will have to change the following information:
# SERVICE NAME (orcl or orcl.us.oracle.com)
# HOST (database_machine.us.oracle.com)
# PORT (1521)
# SID (orcl)
# (3) Go to the end of this scrip and modify the following line:
# ./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Replace "orcl" with the SERVICE NAME you used in step (2) above.
# (4) To run this script use the command: ". setup1"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
echo
#more setup1
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# remove the instantclient10_1 directory should it exist
echo
echo CHECKING FOR instantclient10_1 DIRECTORY...
echo WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
echo
rm -d -f -R instantclient10_1
# extract the instantclient software (basic, sql*plus & sdk)
echo
echo
echo INSTALLING SOFTWARE...
echo
echo BASIC
echo
unzip instantclient-basic-macosx-10.1.0.3.zip
echo
echo SQL*PLUS
echo
unzip instantclient-sqlplus-macosx-10.1.0.3.zip
echo
echo SDK
echo
unzip instantclient-sdk-macosx-10.1.0.3.zip
# set the following environment variables
# Uncomment if you want a way to find the Instant Client (IC) home quickly
#export IC=$PWD/instantclient10_1
# Dynamic Library path required to use the Instant Client (IC) software
export DYLD_LIBRARY_PATH=$PWD/instantclient10_1
# TNS_ADMIN is required if using the TNSNAMES.ORA file (recommended)
export TNS_ADMIN=$PWD/instantclient10_1
# display the modified environment variables
echo
echo SETTING ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# display all environment variables
#echo
#echo ALL ENVIRONMENT VARIABLES
#echo
#env
# copy the TNSNAMES.ORA to the instantclient directory
echo
echo COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
echo
cp tnsnames.ora ./instantclient10_1/tnsnames.ora
# list the contents of the IC directory to see what has been installed
echo
echo INSTANT CLIENT [IC] DIRECTORY
echo
ls ./instantclient10_1
echo
# SQL*Plus Connectivity Test
# To connect to the database specified in your TNSNAMES.ORA file change the
# SERVICE NAME (i.e. orcl) below to the name of the entry in your TNSNAMES.ORA
# file designating the specific database in which you want to connect to
echo
echo SQL*PLUS CONNECTIVITY TEST
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Alternately, you can connect from SQL*Plus to Oracle without using a TNSNAMES.ORA
# file. You can embed the NAME-VALUE pair of the SERVICE NAME from the TNSNAMES.ORA
# file directly into the connection string making sure to use the proper HOST, PORT
# and SID like so:
#./instantclient10_1/sqlplus scott/tiger@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=database_machine.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
5. Save the following text into a file called setup2:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
# ===========================================
# DESCRIPTION
# ===========
# This script will build and run the OCI sample application CDEMO81.C inside
# your Instant Client (IC) software located under the <IC>/sdk/demo folder.
# NOTE: In order for this script to run successfully
# (A) you MUST have already run the script SETUP1 successfully
# and
# (B) you MUST perform any necessary actions required under the SETUP
# section below.
# SETUP
# =====
# (1) You need to edit the CDEMO81.C application PRIOR to running this script to
# change the connection information. By default, the application will attempt
# to connect as user SCOTT with password TIGER to a local Oracle database using
# the BEQ-LOCAL network protocol. This will not work.
# (A) You need to make sure you have the SCOTT/TIGER schema created in your database.
# If not, have your DBA create it by running the script "SCOTT.SQL" from your
# <ORACLE_HOME>/rdbms/admin folder.
# (B) You need to modify the CDEMO81.C application to connect to the database
# you have configured inside your TNSNAMES.ORA file.
# (i) Open the CDEMO81.C file located under the <IC>/sdk/demo folder.
# (ii) Find the following line of code:
# (void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
# and change the two empty strings to the SERVICE NAME you are using like so
# (void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
# (iii) Save the file.
# (2) You MUST be in the initial directory where you copied all of the files listed
# in script SETUP1. In this same location you will find SETUP2. Run SETUP2 from
# this location.
# (3) To run this script use the command: ". setup2"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
echo
#more setup2
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# output the username, password and service name from CDEMO81.C file to your shell
echo
echo USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
echo
#more ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*username" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*password" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i OCIServerAttach ./instantclient10_1/sdk/demo/cdemo81.c
# display the required environment variables
#env
echo
echo REPORTING REQUIRED ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# move to the sdk/demo directory
cd ./instantclient10_1/sdk/demo
echo
echo CHANGING TO [IC]/SDK/DEMO DIRECTORY
echo
ls
# run demo application
echo
echo ATTEMPTING TO RUN APPLICATION
echo
echo BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
echo
make -f demo.mk
echo
echo
echo INSTANT CLIENT [IC] DIRECTORY...
echo
ls ../..
echo
echo CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
echo
echo - libclntsh.dylib
echo - libocci.dylib
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
echo
echo INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
echo
ls ../..
echo
echo
echo EXECUTING APPLICATION...
echo
cdemo81
echo
echo
# TROUBLE-SHOOTING
# If you receive the following error messages:
# Error - ORA-24327: need explicit attach before authenticating a user
# Error - ORA-03114: not connected to ORACLE
# Then you did not modify the CDEMO81.C application with proper SERVICE NAME
# information. See step 1B under the SETUP section in this script to resolve
# this error.
6. Take all seven (7) files and move them into the same directory on your OS where you want to install the Instant Client software from:
1 - instantclient-basic-macosx-10.1.0.3.zip
2 - instantclient-sqlplus-macosx-10.1.0.3.zip
3 - instantclient-sdk-macosx-10.1.0.3.zip
4 - tnsnames.ora
5 - sqlplus_script.sql
6 - setup1
7 - setup2
7. Open the file tnsnames.ora. Be sure to review the comments in this file. You will have to change the following information to connect to a database on your network:
SERVICE NAME (orcl or orcl.us.oracle.com)
HOST (database_machine.us.oracle.com)
PORT (1521)
SID (orcl)
Save the file.
8. Open the file setup1, go to the end of this script and modify the following line:
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
Replace orcl with the SERVICE NAME you used in Step 7 above. Save the file.
9. You are now ready to install the 10g Instant Client software for Mac OS X. From the location where your seven (7) files reside, issue the following command:
[macosx]/oracle> . setup1
NOTE: Be sure to include the period "." and a space " " before the word "setup1" so all environment variables persist for the current session.
This will install the Instant Client Basic and SQL*Plus software and connect to the database specified in the tnsnames.ora file.
10. Here is the sample output of a successful execution of the setup1 script:
[macosx]/oracle> . setup1
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
CHECKING FOR instantclient10_1 DIRECTORY...
WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
INSTALLING SOFTWARE...
BASIC
Archive: instantclient-basic-macosx-10.1.0.3.zip
inflating: instantclient10_1/classes12.jar
inflating: instantclient10_1/libclntsh.dylib.10.1
inflating: instantclient10_1/libnnz10.dylib
inflating: instantclient10_1/libocci.dylib.10.1
inflating: instantclient10_1/libociei.dylib
inflating: instantclient10_1/libocijdbc10.dylib
inflating: instantclient10_1/ojdbc14.jar
SQL*PLUS
Archive: instantclient-sqlplus-macosx-10.1.0.3.zip
inflating: instantclient10_1/README_IC.htm
inflating: instantclient10_1/glogin.sql
inflating: instantclient10_1/libsqlplus.dylib
inflating: instantclient10_1/sqlplus
SDK
Archive: instantclient-sdk-macosx-10.1.0.3.zip
creating: instantclient10_1/sdk/
creating: instantclient10_1/sdk/demo/
inflating: instantclient10_1/sdk/demo/cdemo81.c
inflating: instantclient10_1/sdk/demo/demo.mk
inflating: instantclient10_1/sdk/demo/occidemo.sql
inflating: instantclient10_1/sdk/demo/occidemod.sql
inflating: instantclient10_1/sdk/demo/occidml.cpp
creating: instantclient10_1/sdk/include/
inflating: instantclient10_1/sdk/include/nzerror.h
inflating: instantclient10_1/sdk/include/nzt.h
inflating: instantclient10_1/sdk/include/occi.h
inflating: instantclient10_1/sdk/include/occiAQ.h
inflating: instantclient10_1/sdk/include/occiCommon.h
inflating: instantclient10_1/sdk/include/occiControl.h
inflating: instantclient10_1/sdk/include/occiData.h
inflating: instantclient10_1/sdk/include/occiObjects.h
inflating: instantclient10_1/sdk/include/oci.h
inflating: instantclient10_1/sdk/include/oci1.h
inflating: instantclient10_1/sdk/include/oci8dp.h
inflating: instantclient10_1/sdk/include/ociap.h
inflating: instantclient10_1/sdk/include/ociapr.h
inflating: instantclient10_1/sdk/include/ocidef.h
inflating: instantclient10_1/sdk/include/ocidem.h
inflating: instantclient10_1/sdk/include/ocidfn.h
inflating: instantclient10_1/sdk/include/ociextp.h
inflating: instantclient10_1/sdk/include/ocikpr.h
inflating: instantclient10_1/sdk/include/ocixmldb.h
inflating: instantclient10_1/sdk/include/odci.h
inflating: instantclient10_1/sdk/include/oratypes.h
inflating: instantclient10_1/sdk/include/ori.h
inflating: instantclient10_1/sdk/include/orid.h
inflating: instantclient10_1/sdk/include/orl.h
inflating: instantclient10_1/sdk/include/oro.h
inflating: instantclient10_1/sdk/include/ort.h
inflating: instantclient10_1/sdk/include/xa.h
SETTING ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
INSTANT CLIENT [IC] DIRECTORY
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
SQL*PLUS CONNECTIVITY TEST
SQL*Plus: Release 10.1.0.3.0 - Production on Fri Aug 19 15:26:08 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
USER
SCOTT
SYSDATE
19-AUG-05
TEST_RESULTS
successful
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
IF THE SQL*PLUS CONNECTIVITY TEST WAS SUCCESSFUL
READ SETUP2 TO CONFIGURE AND RUN THE OCI cdemo81.c SAMPLE
[macosx]/oracle>
11. Once you have obtained a successful execution of the setup1 script, you are ready to configure cdemo81.c to connect to the database you have configured inside your tnsnames.ora file.
Open the cdemo81.c file located under the <Instant_Client>/sdk/demo folder. Find the following line of code:
(void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
Change the two (2) empty strings to the SERVICE NAME you used in Step 7 above.
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
Save the file.
12. You are now ready to run cdemo81.c. You MUST issue the following command from the initial directory where you copied all of the files in Step 6:
[macosx]/oracle> . setup2
NOTE: Be sure to include the period "." and a space " " before the word "setup2" so all environment variables persist for the current session.
This script will configure your environment, build and run the OCI sample code connecting to the database specified in the tnsnames.ora file.
13. Here is the sample output of a successful execution of the setup2 script:
[macosx]/oracle> . setup2
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
static text username = (text ) "SCOTT";
static text password = (text ) "TIGER";
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
REPORTING REQUIRED ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
CHANGING TO [IC]/SDK/DEMO DIRECTORY
cdemo81.c* demo.mk occidemo.sql occidemod.sql occidml.cpp
ATTEMPTING TO RUN APPLICATION
BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
rm -rf SunWS_cache
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
rm -rf cdemo81 cdemo81.o occidml occidml.o
/usr/bin/gcc -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI cdemo81.c
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o cdemo81 cdemo81.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
/usr/bin/g++ -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI occidml.cpp
In file included from ../include/occi.h:43,
from occidml.cpp:11:
../include/occiData.h:411: warning: use of `long double' type; its size may
change in a future release
../include/occiData.h:411: warning: (Long double usage is reported only once
for each file.
../include/occiData.h:411: warning: To disable this warning, use
-Wno-long-double.)
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o occidml occidml.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
INSTANT CLIENT [IC] DIRECTORY...
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
- libclntsh.dylib
- libocci.dylib
INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
README_IC.htm libnnz10.dylib libsqlplus.dylib*
classes12.jar libocci.dylib ojdbc14.jar
glogin.sql libocci.dylib.10.1 sdk/
libclntsh.dylib* libociei.dylib* sqlplus*
libclntsh.dylib.10.1* libocijdbc10.dylib* tnsnames.ora
EXECUTING APPLICATION...
Enter employee name (or CR to EXIT): LARRY
Enter employee job: CEO
Enter employee salary: 10000
Enter employee dept: 40
LARRY added to the OPERATIONS department as employee number 7974
Enter employee name (or CR to EXIT):
Exiting...
[macosx]/oracle/instantclient10_1/sdk/demo>
14. If you have any problems running this script please open a Service Request (SR) with Oracle Support for further assistance and be sure to upload the output from the script to the SR.
ReferencesNote
332588.1 - How to Install, Configure and Test Oracle 10g Instant Client Basic, SQL*Plus and SDK Packages for Mac OS X (Runs OCCI sample code - occidml.cpp)
Errors
ORA-3114 "not connected to ORACLE"
ORA-24327 need explicit attach before authenticating a user
ORA-12154 "TNS:could not resolve service name" -
How to connect apple tv 2 to pioneer pdp s35
How do I connect apple tv 2 to pioneer pdp.s35 tv? I connected to one of my pioneer receiver's hdmi ports but when I cycle through the inputs I can't find apple tv. Thanks.
Welcome to the Apple Community.
I don't have or indeed know anything about your receiver, but unless the Apple TV can see an active device and connect via HDMI it won't turn on. You will need to set your receiver to use the correct input and then turn on the Apple TV.
Maybe you are looking for
-
Reverse Sign in Crystal report
Hi, I am working on CR 2008 and SAP BEx query.My report requirement is to change the sign of values. Suppose if one value is negative then show in the report as positive.same for positive to Negative. I know how to do in the SAP Bi report. If any one
-
Hi, Problem: I don't know why rendering and exporting are too slow, even when i woke up this morning and found my video exported it couldn't open. I'm trying to export a 10min footage. It tells me it needs 35 - 40 min to export and after 30min. the t
-
How to implement search engine for pdf file.
Hi I am newbie to AIR technolgy .how to implement search engine . when i enter the name of file in search box , it should fetch correspoding the pdf file . Please help me out Thanks Mohan
-
HP4250n Printer and Forms printing to wrong tray
OK, I've tried everything I can think of... here's the code: ^job PATFORM -zPHAM01P -atjoff -ati4 -c1 Issue: -ati4 on the HP 4250n This should print from tray 2 on the printer, but it's wanting to do a manual feed from tray one. Works fine on every o
-
Accessing variables from one layer.
Hi all, I am new to falsh so please help. I have defined some variable at one layer say click origin and destination and i want to access that varibale on click event of a button. how to access that variable on another layer. Thanks in advance.