How to connect between th iphone 3 and ipad4 via Bluetooth ? (it does not work)

This is done in order to use the 3G via the iphone.

If your carrier doesn't support it then there probably isn't much that you can do about it (if you want to stay with your current carrier). You can get mifi devices (effectively a mobile 3G router) which you can use with iPads, laptops etc, and they also use a sim card so you could consider getting one of those - I haven't got or used one so I can't comment on how good they are, and I don't know whether you have to go for a subscription with them or whether they can be used on a 'pay as you go' basis if for example you wouldn't be using it that much.

Similar Messages

  • When I plug my connector cord between my iphone 4 and my laptop, it suddenly does not charge anymore like it always has before, although iTunes sees my phone. Any ideas?

    When I plug the connector cord between my iPhone 4 and my laptop, it does not charge now (as it always has in the past), although iTunes definitely sees my phone (so the connection is good). This also happened when I tried to charge my iphone in my car with an adaptor which used to work before too. Any ideas on why my phone is suddenly not charging anymore??

    I removed the AMDS as part of the instructions for completely removing itunes. Nothing changed unfortunately. I don't understand why it is happening!
    I have already checked for lint, etc as you suggested, but don't have another USB cable on me at the moment. I'll be returning home tomorrow so will try then, but I would have thought the cable was fine as it still charges the phone through an AC adaptor fine. Thanks for the suggestions!

  • Can I download ios5.1 back to my iPhone 4S and remove ios6 as it does not work properly

    Is it possible to download ios5.1 and remove ios6 as I have found the latter to be not very good, my Internet Is slow the maps are not good. And I am kot happy with my iphone4s

    Cozy  wrote:
    Is it possible to download ios5.1 and remove ios6 ...
    Downgrading is Not Supported by Apple...
    https://discussions.apple.com/thread/4320946?tstart=0

  • How do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunes

    how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl

    Place the iPod in recovery mode using this program. and then restore via iTunes.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

    Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
    Making sure everything is allowed through firewall
    Rebooting phone/laptop/router
    Disabling ipv6
    Disabling all networks except the one curently on
    Re-installing iTunes
    Restoring iPhone
    No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

    I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate? I am in Delhi, India.

    Hi,
    I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate it? I am in Delhi, India.Any suggestions.
    Satish

    would be best if you can download the guide here
    http://support.apple.com/manuals/#iphone

  • I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings

    I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much

    Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.

  • HT5594 I upgraded to iOS 7 and my location service button does not work.  How can I turn it back on?

    I upgraded to iOS 7 and my location service button does not work.  How can I turn it back on?

    Settings>General>Restrictions>Privacy>Location Services. Have you restricted it?

  • I just upgraded to the maverick and, of course, the iPhoto does not work with it.  How do I upgrade to version 11?  I cannot find it anywhere

    Recently upgraded to Maverick and the version of iphoto does not work with it.  How do I get and download the version 11?    I can't find it anywhere

    Which iPhoto? 9.4.6  and 9.5.1 work here.
    FWIW, iLife '11 is available here: http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES

  • How do I close programs in IOS7.  The old way with double tapping the button and getting the red X does not work.  Even rebooting the phone does not work.

    How do I close programs with IOS 7?  The old way of closing programs by double tapping on the button, holding down an icon until it started shaking and a red X appears does not work.  Every program I opened appears.  Turning on and off the phone does nopt work.

    I just found out.  Above the icon is a copy of the open page of the program(s).  You slide the pages up to close.

  • Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app.  Also, deleting old texts can free up some room.

  • My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reloading software and reset to original factory settings.

    My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reseting to original settings and reset the operating software.  Any ideas?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Downloaded ios7 to my iphone4s and now my volume control does not work 99 % of the time. what can i do to solve the problem

    I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?

    Adjust the Volume Control in Control Center, or try a RESET.............

Maybe you are looking for

  • How can I sync my old music library in my new nano to the new library???

    CAN'T COMBINE MUSIC LIBRARIES:  Got a new 6th gen nano.  X-ferred my old music lib to new nano.  Gave my old nano to my hubs and he erased most of the music and added his own.(so, he has the same name for the old nano that I was using)  Now, when I t

  • Converting files to SRGB

    I am trying to convert some pictures into an sRGB color profile so that the printers will print them.  I am using Photoshop CS6 extended.   I used the File>Script>Image Processor to do the converting.  The checkbox for convert profile to sRGB was sel

  • Unable to view documents through Adobe Reader

    Hi, The following are the softwares which we have installed. 1. Adobe Reader - 7.07 2. Adobe Acrobat Professional - 7.0 3. Adobe LiveCycle Designer 7.1 4. Adobe LiveCycle Forms 7.2.2 5. Adobe LiveCycle Form Manager 7.2.2 6. Adobe LiveCycle Workflow -

  • How to suppress Joblist in OAS 10.1.2.0.2 console

    Hi all, I am using Reports Server Version 10.1.2.0.2 When I am running the below URL, the list of processed, failed and scheduled jobs are getting displayed. Is there any way to stop browsing the list? https://<server-ip>:<port>/reports/rwservlet/sho

  • Class Creation

    I'm trying to create a class that represents all 52 playing card (Suit and Value), and I'm having difficulties. I'll then create a function in my Document class that compares two card objects as parameters and traces out which one would win in a figh