How to connect com ports in forms 6i

hi im creating a POS in Kuwait but i dunno how to connect the com port in forms 6i if any one know plz tell me

Hi,
.odb is openoffice.org database file or open source database file. Anybody has any knowledge on how to use Form 6i with this database file..

Similar Messages

  • Reading from COM port, in forms 6i.

    Hi All,
    Can anybody help me how to read COM port, capture from comport in forms 6i, we have weigh bridge system and they have supplies MS access bases application, i would like to use forms based own application instead that.
    please anybody help me..
    thanks in advance

    [http://www.java2s.com/Code/Java/Development-Class/COM-Port.htm]

  • How to Use Com ports on oracle forms

    Hai,
    how we can use com port to communicate to the device like Pole Display(output device) or fixed scaneer (input device) having serial port(Input device) in oracle forms.
    Thanks & regards

    For web forms you will probably need to create a PJC and/or use webutil and make calls to the device's API.

  • How to read COM port in Developer 4.5 or 6i?

    Dear all
    Have any one please let me know how to create forms with Developer6i join Barcode Scanner in COM port?
    At the time, I import OLE Library interface to be developer's package body (Component MSCOMM32.OCX) It isn't efficiency.
    Have any one Please let me your method and how to ?
    Thanks a lots.

    Parallel threads are easy in Labview.  You just create two loops where the output of either loop is not connected to the input of the other.  Without this data dependency, the two loops run in parallel.  See the attached vi, my producer-consumer template.  Replace the random number generator in the top loop with your serial port code.  Put your other processing code in the bottom loop.  Use the queue to pass info from one loop to the other.  You can signal the lower loop when the serial port receiving is done by putting something on the queue that signifies the completion (like a "done" string).  Your lower loop will constantly check the queue, looking for the "done" string.  You can use a boolean if you remove the string wires and replace them with boolean types.
    Bytes at Port will look at the serial port buffer and report the number of bytes sitting there waiting to be read.  Call it before you read, and pass the number from bytes at port to the read function.  Search the LV examples for serial port and you will see how bytes at port is used.
    Message Edited by tbob on 10-04-2005 03:51 PM
    - tbob
    Inventor of the WORM Global
    Attachments:
    ProducerConsumer.vi ‏40 KB

  • Access COM Port through Forms 6i

    Dear all,
    How r u???
    I want to connect hardware (i.e. IR devices) with COM port. And want to access through Forms. I have done it before in .NET technology but at this time i want to do this in Oracle Forms.
    Kindly reply me for this.@ [email protected]
    thanks
    Muhammad Raheel Mannan

    If you have done it in .net you can make it as exe and implement webutil in forms.
    Call the .net exe using the webutil client host
    Rajesh ALex

  • How I connect remote database in forms builder

    username myname
    password mypass
    database test
    database server 192.165.21.32
    port 1521
    how can I connect in oracle 11g forms builder ??

    using 192.165.21.32:1521:test in the connect string ? ( or 192.165.21.32:1521/test ) or set it up using TNSNAMES.ORA

  • How to find COM port for a specific USB device

    I want to automatically find the COM port for a specific USB device. I use the VISA find resource function but I can't get the manufacturer's ID. VISA says the device doesn't have this information. The find resource function does narrow my search (and often finds the port depending on what other usb devices are connected). In the case where it finds multiple possible ports, can I safely send a message to each port to determine if it is the correct device? I know it will work for my purposes but I don't know if I am asking for trouble by sending messages to unidentified devices. Any thoughts on how I can identify my device port will be appreciated. Thank you - Dave F

    You can do it using WMI.  I have C# code I am supposed to convert into LabVIEW foing something similar to what you want to do.  In my case, I am testing a USB device and need to know which port on the hub is which COM port (the device creates a virtual COM port for communication).  Using WMI, you can find the hardware path to the device and know that COM10 is USB hub Port 1 for example.  Unfortunately, I cannot share the C# code.
    You can download the WMI Code Creator tool from Microsoft, which should help you tremendously find the proper method of getting your info.
    You basically want to look at all the W32_USB devices for the specific device you are looking for.  Once you have that, you can look for the COM Port associated with it.  I don't know when I will get to coding this up in LabVIEW, but will report back when I do, assuming you haven't found the solution by then.

  • How to connect a web upload form(for video uploads) to Azure Storage / Media services?

    Hi I have a form on my Joomla site (see image under for viewers to upload and send me their videos, images and info.
    Question: 
    1.Instead of receiving this form content via email,  I just need a
    HTML and/or PHP code with tags code so I can send the content viewers give me (videos with up to 500MB) directly into my existing Azure blob.
    Seems I can also direct the form to a any database... They gave me this code sample but it was for AWS
    https://www.chronoengine.com/faqs/63-cfv4/cfv4-working-with-form-data/5196-can-i-save-files-to-aws.html
    Therefore they suggested me to reach out to Azure devs.
    I don't code so please show me the exact code HTML and/or PHP code to connect my "pre-built forms" with Azure Storage/Media services.
    kd9000

    You may refer the following links which may help you in building forms to direct to azure table/blob storage:
    http://www.joshholmes.com/blog/2010/04/15/creating-a-simple-php-blog-in-azure/
    http://stackoverflow.com/questions/27464839/use-form-post-php-to-upload-a-file-to-azure-storage-and-return-the-link
    Regards,
    Manu

  • Equium M40X-189: How to connect RGB port to RS232 port?

    Hi,
    as you know the Equium M40X-189 P-M 730/XP has an RGP monitor port and does not have RS232 port.
    Im working with Auto-titration device which require RS232 port for connection!
    Any idea of how i can connect my notebook to this device!
    pls help
    thanks
    Omrankl

    Hi
    As far as I know the RS-232 port is a serial port and I dont think that its possible to connect the RGB port to the RS232 port.
    But I have found the useful website:
    http://www.ontrak.net/usb.htm
    There you will find a description how to connect the USB port to a RS-232 port.
    You need a ADU interface.
    Check the link.

  • How to connect .odb database using forms 6i`

    Hai
    I need to connect .odb database with forms 6i. Tell me the steps and settings i need to setup for running forms 6i in .odb database.

    Hi,
    .odb is openoffice.org database file or open source database file. Anybody has any knowledge on how to use Form 6i with this database file..

  • How to use COM component in Forms 6.0 ??

    Dear All,
    We are developing Retail-Chain s/w and have a 3rd party s/w for credit card and
    they give a .dll (not a ordinary dll ), .tlb file and sample VB code to integrate the 3rd party s/w.
    Now i want to do the same task in my application using Forms 6.0.
    Here is the sample code for VB :
    ' Sample VB code for invoking Plutus from VB-based ECR application
    Private Sub Command1_Click()
    ' This is called when "Pay by card" is pressed in ECR application
    Dim strIO As String
    Dim lTrackingID As Long
    ' Add PlutusExchange v1.0 Type Library (TLB) as reference to the project
    Dim plutObj As New PlutusExchangeLib.ExchangeObj
    lTrackingID = 6 ' For testing, enter the scenario number as given in interchange spec doc
    strIO = "T123,156" ' This is input to Plutus -- base amount in paise for Rs. 1.56 and ECR bill number: T123
    ' Bill number is only used for printing on Plutus chargeslip
    plutObj.PL_DoTransactionEx lTrackingID, strIO
    MsgBox strIO, vbOKOnly, "Plutus Response String"
    ' Parse this string to extract Plutus response. Only indication of successful transaction authorization is a valid auth code returned in response
    End Sub
    Plz. reply.
    Note: I already register the .dll file and it showing in import OLE option under Forms 6.0.
    Thanks
    Debabrata
    Message was edited by:
    Debabrata Guchhait

    You need a Java to COM bridge like Jacob. Try searching this forum for more information, I've answered this question several times before.
    Dom.

  • How to connected mgmt port on switch 2960 -XR

    Hi guys,
    I need of a technical support  to resolve a issue with some Switch 2960-XR and its MGMT Port installed on our infrastructure.
    I'd like to reach it via ssh connection to management them from a remote station (my PC), some guides found on Internet suggested me to use a extenal Hub/switch and a PC dedicated for that like this:
    |SW1 mgmt port|------|H|
    |SW2 mgmt port|------|U|-------- PC
    |SW3 mgmt port|------|B|
    I've also tried to patch the mgmt port on a port tagged with a management VLAN but it's not worked.
    I ask you if there is a way to reach that SW using mngt port  without use another external SW, thanks in advance for your support 

    Our network is hybrid, we have CIsco Sw and IBM Sw.
    For the IBM solution the configuration of mgmt port is inband (data) and use an interface called IP2 where assigning an IP address we can manage via ssh the sw. In this case we've created a dedicated Vlan 15 and assigned as IP 10.10.10.15/24 to the interface IP2. 
    In Cisco Sw the only ways I know is either to create a dedicated Vlan with an IP or using Out of band, but in this case I've to use an external Sw.
    Which is the best solution to have the management port on Cisco Sw without to use out of band?
    thanks

  • How can i read an COM port ???

    Hi,
    somebody knows how can i read an COM port from Forms 4.5 ?
    Thanks in advance.
    Patricio

    Hi Patricio
    have U got any solutions?? Im also trying to send message to display panel from forms 5.
    If You got any please let me know itll help me a lot
    Thanx
    Suraj

  • How to Connect Adobe form to Portal

    hi sdn friends,
    How to connect R/3 Adobe form to the Enterprise Portal / Smart form to the Enterprise Portal
    plz help me
    thank u,
    praveen.

    That depends...
    If you need to display MSS forms into your portal, plz have a look at the Business Package for MSS. Interactive forms are presented in the portal via the ISRForm application (and PCRApplication).
    If you need to display your custom made forms into the portal, you can develop your own WebDynpro application that embeds the Adobe Interactive form.
    Could you explain more about your requirements?
    Cheers,
    Noë

  • Cannot open com port

    Hi all,
    maybe not entirely sure if this is a labview question, but i was using labview when it happened.  I am using labview to open and run a batch file using a COM connection and an FTDI RS232 to USB.  Now i believe that portion of the code runs smoothly, ive tested it out and it worked at one point.  After using an instr property node to check if port is open, which i now know cant be used on non ni devices anyways, it will not open to run the batch file.  I have run it from command prompt and i get a communcation port cant be open error.  Now i moved one of these devices from  COM16 to COM2 and it works perfectly now, but the other one wont work at all and why should i have to change port numbers? any tips or troubleshooting advice?

    Just in case anyone out there runs into the same problem, i followed this link here, uninstalled all com ports, then reinstalled com ports and is now functioning properly. But it seems that my port 18 which was not working before is still not working.
    http://theitbros.com/how-to-delete-com-ports-in-use/

Maybe you are looking for

  • Uploading a photo in a jsp page

    hi Friends, i have 4 fields Date <takes system date> Description<description of the photo> Path< has a text box > Upload <is a button> I want to upload photos on click event of a button and the the path of where my photo is located , that shud be ent

  • Trying to use signal in and signal out but couldn't pass parameters

    Hi all,            I am trying to use Signal out from 1st iview and trying to get the same parameters to the second iview where this iview gets populated when i click a button in result of first iview. I have created these two iviews in same model an

  • SQL Reverse "Order By"

    Ok I'm trying to order by a column which consists of numbers, which works, however, I want the high numbers at the top not the bottom. Now I know DESC works for alphabetical entries, but what works for numbers? This has to be simple. Thanks!

  • Referencing assemblies in the GAC vs. a local appllication directory

    I have a C# (I am using VS2012) project that, when I checked it out of TFS, seemed to already reference an assembly in the GAC, but the DLL version I found in the GAC is incorrect and older than what the application expects, so I cannot build.  Anoth

  • Snow Leopard, iOS 5 and iCloud -- need advice.

    I can't update to Lion yet. (I run Quicken, and it isn't Lion compatible. What will happen with my MobileMe if I update to iOS 5 on my iPhone and iPad? Will I be able to sync to my Snow Leopard Imac?