How to connect deskjet 2510 to router usb

I want to connect my deskjet ink advantage printer 2510 to the router usb so I can print from the laptop without physically
connecting to the printer. Network printing. Thank you

eksar wrote:
I want to connect my deskjet ink advantage printer 2510 to the router usb so I can print from the laptop without physically
connecting to the printer. Network printing. Thank you
Unfortunately your printer is only USB and unless you use something a hp jetdirect print server modules you will not be able to hookup to the router and make it a network printer. Also that USB on the router is mainly for network storage devices not regular USB hookups unless they state otherwise. AFAIK
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

How to connect 10.9 Mac to USB printer via E2500 router?

So I've established that Linksys Connect software is incompatible with a Mac running OS 10.9 Mavericks.
Is Linksys Connect the only way to connect a Mac with a printer connected to the E2500 router? Or is there another way to make it work?

New operating systems and older software always have compatibly issues. Recently firmware updates have been pushed out. Maybe one will come for the E2500.
In a business environment you would normally share out the printer from a server or PC. Sharing from a router will be problematic.
How about the reverse; sharing the printer from the MAC to the PC? Do you have an old computer lying around you can turn into a Printer server? I just had a thought, there are actual printer server devices made for this as well.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

How to connect a E1200 wireless router to a machine tool network for wireless communications

Hello all, I am new to the forum, hope someone can help me out. I am wanting to connect my E1200 wireless router to a machine tool in our factory that has programmable controllers and is connected to the machine components via ethernet connections. This is so we can troubleshoot the machine without having a wired laptop. We have several ethernet switches on the machine and a range of IP addresses say from 192.16.1.1 through 192.16.1.150, and 192.16.17.1 through 192.16.17.150, all of the addresses are not used but random addresses in the range. I would like to be able to connect my E1200 to either one of the networks without having to make a change in the router setup. I can make it work on either network but when I switch my cable to the other network it has to be reconfigured. I am currently connecting my data cable to a ethernet port on the router and changing my router address from 192.168.1.1 to 192.16.1.1 and selecting a range of 150 so it will assign numbers as needed. This works great until I change to the other network and I have to change my router address to 192.16.17.1, I know this can be done on some routers because the technicians from the machine builder use them when working on the machines. thanks

On the basic setup tab make the changes shown below:
This basically make the router disappear off the existing networks and turns it into a wireless AP.
Then when you set your laptop's wireless adapter to whatever IP network you want to connect to.
If you need to connect to your router again change the laptop's adapter IP to something like 192.168.200.2
Keep in mind nothing ever gets plugged into the Internet Port on the router.
What I do with these manufacturing machine's is put them on the company network with static IP's. Then so operators can transfer programs and view drawings I place ELO touchscreens at each location. For the Laser cutter operators that do nesting they have a desktop workstation for the CAD software and put the nests on a network share or direct to the laser cutters.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

TS1398 How to connect iPad to private router not connected to the internet?

I have an iPad 2 running iOS6.1 that will not connect to my Asus RT-AC66R router when the router is not connected to the internet. The message I get on my iPad is "The cable for ethernet is not plugged in". This also happens with my iPod gen 5.
I'm trying to control Philips Hue bulbs with their Zigbee bridge connected to the router, but I do not want a connection to the internet. The Hue app works with an Android phone and an older iPhone 4 running an older iOS version without the router connected to the internet. The newer iOS6 seems to want to have access to the internet, but having internet access should not be required for this application.
If I do connect the router to the internet, the Hue app works on my iPad2 and it continues to work for a couple of minutes after I disconnect the internet cable. Then I get the message "The cable for ethernet is not plugged in" again. I'm doing this at work where I'm not supposed to connect the router to the work network cable, else it wouldn't be an issue.

mrogers641 wrote:
How can I install Mavericks on a Mac that is not connected to the internet? Is there a way to copy OS 10.9 to a USB drive an then install it?
Log in to another computer, family's or friend's, and download it to a USB drive, using YOUR OWN Apple ID and then install it onto your Mac. Preferably you could use someone else's WiFi connection to directly download and install on your Mac,
Cheers
Pete

How do connect tv to my router

how do i connet my tv to my router

Can we please get a bit more information from you since you did not tell us.....
1) How you are trying to connect the TV to the router....Ethernet cable? Wireless?
2) What the brand and model number the TV might be?
3 What router you are asking about?
Please remember that we cannot see your network. Things that are obvious to you there are totally unknown to us.
We only know as much about your issue as you tell us.

How to install Deskjet 3055a, new router but unsupported operating system on Macbook

Hi, Please go easy with me, I really know very little about all this ! We have a Deskjet 3055A printer which has been linked wirelessly to my iPad and a MacBook without a problem until now. We have installed a new router. I am thinking that we have to amend our network in some way ? I have tried to run the HP cd on the MacBook to amend it, but all I get is the message as follows... "Unsupported operating system. The installer is not compatible with the version of the operating system on your computer. It is compatible only with 10.6 and below." The MacBook is running OS X version 10.9.5 Any help greatly appreciated - thank you ! ( Please keep it simple !! ) We 

Welcome to the community @Teekayk
I understand you are trying to install your Deskjet 3055A on your Mac, running Mavericks. The installation CD may be compatible up to 10.6, and that could be why you are seeing the error message.
This link should help you. It will show you how to install the printer on your Mac. There is no full driver and software available for the Deskjet 3055A on Mavericks, which basically means you will need to review your other options to scan on your Mac through Apple Updates, which is all included in the guide.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a great weekend, I hope the information helps you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing from iMac using bonjour to a printer connected to netgear wifi router USB port

Wondering if someone could help provide advice. I have just purchased my first iMac and a new NetGear W600 wifi router. I have connected my Canon multifunction MX310 printer directly to my iMac and it prints and scans perfectly. However when I connect it to the USB port of my new NetGear W600 wifi modem the only thing I can print is the test page on the iMac, ... nothing else prints. I receive the message that my iMac has connected to the printer but nothing prints out, except the basic test page.
In stark contrast, when I install bonjour on my Dell notebook PC, running Vista, it prints perfectly to the same MX310 printer connected to the NetGear wifi router!

Hi, Thanks for your help. I am trying to get documents printing to the canon printer in wifi mode, via bonjour, when the printer is connected to the USB port of my NetGear wifi router. I have a wifi internet connection via the same NetGear wifi router so it doesn't seem to be a network connectivity issue. ... any other ideas?
Many Thanks
John

W530 : How to connect 4 external displays without USB DOC

I want to connect multi displays without USB-DOC.
Is it correct as follows?
1. Change connector type from mini-display port to display port.
2. "Display port to Dual display port adaptor" connect.
3. At Each port, more "Display port to Dual display port adaptor" connect..
Please tell me solution.
Thanks.
Solved!
Go to Solution.

This setup won't work.
You would need a Series 3 Dock workstation with 2 sets of DP ports.
Then you would need a dp splitter for each of the DP ports on the dock.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How to connect lvdt and loadcell to usb 6008

please help me iam dont know how to choose a daq card. searched a lt but iam lost.
i want to measure force and displacement simultaneously of a suspension test rig and i wanted to use ni usb6008 because of my project budget.
can i use this daq card to measure these parameters ??
please reply.. thanks in advance.
Solved!
Go to Solution.

Hi touheed,
To be able to determine whether or not using a NI USB-6008 would be suitable for your application it would be useful to get a little more information about the measurements you want to take. If possible would you be able to provide the voltage range you intend to measure with your instruments, and the sampling rate you require?
Also I noticed in the subject line that you're going to be using an LVDT, will you also be generating the voltage for this with the 6008, or will this be done seperately?
To give you some context, the NI USB-6008 does not take truly simultaneous readings at each instant, but will rapdily alternate between channels, giving effectively simultaneous samples. As this device has a sampling rate of 10 Ks/s, and you will be using 2 channels, the effective sampling rate for each input would be 5 Ks/s.
Matt H
Applications Engineer
National Instruments UK

How to connect to Agilent DSO7104 through USB connection

I want to connect to Agilent oscilloscope DSO7104 using USB interface.
I have installed labview 8.0, ag6000a Instrument Driver and visa4.6.2.
When I use Example of ag6000a Instrument Driver, the VISA resource name are COM1, COM3 and LPT1.
What should I do to use USB interface?
Thanks.

There should be an inf driver file that comes with the instrument if it supports the USBTMC class.

How to connect airport to wireless router?

I have a router wireless Huawei B683 connected to WEB but I want to extend the net with a airport express?
Can I connect in wireless mode the Airport Express?

Neither Apple nor Huawei design their products work with each other for this purpose.
As we already answered, the products are not compatible.

How to connect SPA122 to wireless router

I apologize if this is in the wrong place as it is a decidedly newbie question but I can't find an answer anywhere here. I am trying to connect my SPA122 ATA to my new TP-Link TL-WDR3600 wireless router. This setup worked with my old router (NetGear WGR614) but I cannot seem to get it to work with the new router. I am connected to the Internet through a Huawei MT130U cable modem with nominal 28MBS bandwidth. I have been told that the throughput of the router in the SPA122 would restrict that so I had connected it to my old WLAN router in the DMZ. This worked fine before but not with new router.
TP-Link TLWDR3600 N600 Dual Band Gigabit Router. DHCP range: 192.168.0.100-199 and I reserved 192.168.0.150 for the MAC address of the SPA122. I set 192.168.0.150 as the DMZ host IP and enabled it.
SPA122: I set the Networking Service to Bridge. I have tried using both Automatic DHCP and Static IP. Neither seem to work.
Static IP address: 192.168.0.150 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.0.1 (discovered by IPCONFIG)
Any help or assistance would be most gratefully received. Thank you.
Fraser

Sorry for the misplaced post and delayed move. I just had surgery and will be discharged tomorrow. Thank you for the direction to the appropriate forum Paolo.
My router and Internet (cable modem) are working but my VOIP (SPA122) is not. I have heard that there is a firmware memory leak in the SPA122 and wonder if this is contributing to the problem. I have rebooted the SPA122 (as well as the router and modem) repeatedly to no avail.
The SPA did work (with intermittent problems) with my old NetGear WGR614 modem but does not with my new TP-Link TL-WDR3600. I have not tried it since being admitted for surgery Sunday and will try again when I return tomorrow (Wednesday).
I would be very grateful for any help or assistance.
Thanks, Fraser

HOW TO CONNECT MG3100 TO ATT ROUTER

Have a MG3100 series printer.
Had it connected on old system.
Have not got it to connect to new ATT U system.

Hi ROJASE42!
So that the Community can help you better, we will need to know any error messages you're getting, and the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other details you'd like to give will only help the Community better understand your issue! Thanks and have a great day!

How to connect Trigger USB-6009 on a flowmeter

I have a flowmeter with the data:
sensing principle: hall-effect, non contacting
output square wave: NPN o.c.
Voltage supply: 4,5-24 VDC
output current: 13mA max
more you can find in the attachement and i use the USB-6009.
How i have to connect the flowmeter to the trigger (PFI0)?
Thanks in advance for any help!
E.Stein
Attachments:
flowmeter.pdf ‏17 KB

Thanks for
Info!
I work with
LabVIEW 8.6 and the configure and programming
of
falling-edge
events is not the problem.
The Problem
is the connection. How to connect the flowmeter to the
USB-6009? Because the 6009 have no gate and out.

How to connect my Alesis to Logic Express Pro, running on an Intel Mac Mini

Hi,
would anyone possibly have an idea how to connect my Alesis Multimix 8 USB to Logic Express 7,2?
The Alesis has a USB out. But I don't see anything in the L/E documentation on USB connections.
I'm hopeful there's another way.
Thanks very much.
-peter

LE documentation won't give instructions for use of 3rd party equipment, except possibly generically.
Have you downloaded the latest drivers? If it is a USB item, perhaps you are meant to plug in the USB cable rather than wishing it was something else.

How to connect deskjet 2510 to router usb

Similar Messages

Maybe you are looking for